Some Observations on Carbon Nanotubes Susceptibility to Cell Phagocytosis

The aim of this study was to assess the influence of different types of carbon nanotubes (CNTs) on cell phagocytosis. Three kinds of carbon nanotubes: single-walled carbon nanohorns (SWCNHs), multiwalled carbon nanotubes (MWCNTs), and ultra-long single-walled carbon nanotubes (ULSWCNTs) before and after additional chemical functionalization were seeded with macrophage cell culture. Prior to biological testing, the CNTs were subjected to dispersion process with the use of phosphate buffered solution (PBS) and PBS containing surfactant (Tween 20) or dimethyl sulfoxide (DMSO). The results indicate that the cells interaction with an individual nanotube is entirely different as compared to CNTs in the form of aggregate. The presence of the surfactant favors the CNTs dispersion in culture media and facilitates phagocytosis process, while it has disadvantageous influence on cells morphology. The cells phagocytosis is a more effective for MWCNTs and SWCNHs after their chemical functionalization. Moreover, these nanotubes were well dispersed in culture media without using DMSO or surfactant. The functionalized carbon nanotubes were easily dispersed in pure PBS and seeded with cells

PLA-Based Hybrid and Composite Electrospun Fibrous Scaffolds as Potential Materials for Tissue Engineering

The aim of the study was to manufacture poly(lactic acid)- (PLA-) based nanofibrous nonwovens that were modified using two types of modifiers, namely, gelatin- (GEL-) based nanofibres and carbon nanotubes (CNT). Hybrid nonwovens consisting of PLA and GEL nanofibres (PLA/GEL), as well as CNT-modified PLA nanofibres with GEL nanofibres (PLA + CNT/GEL), in the form of mats, were manufactured using concurrent-electrospinning technique (co-ES). The ability of such hybrid structures as potential scaffolds for tissue engineering was studied. Both types of hybrid samples and one-component PLA and CNTs-modified PLA mats were investigated using scanning electron microscopy (SEM), water contact angle measurements, and biological and mechanical tests. The morphology, microstructure, and selected properties of the materials were analyzed. Biocompatibility and bioactivity in contact with normal human osteoblasts (NHOst) were studied. The coelectrospun PLA and GEL nanofibres retained their structures in hybrid samples. Both types of hybrid nonwovens were not cytotoxic and showed better osteoinductivity in comparison to scaffolds made from pure PLA. These samples also showed significantly reduced hydrophobicity compared to one-component PLA nonwovens. The CNT-contained PLA nanofibres improved mechanical properties of hybrid samples and such a 3D system appears to be interesting for potential application as a tissue engineering scaffold

Electrospun polycaprolactone membranes with Zn-doped bioglass for nasal tissues treatment

In this work, composite membranes were investigated as future components of a layered implant for the reconstruction of nasal septum. Incorporation of zinc ions into nasal implants could potentially provide antibacterial properties to decrease or eliminate bacterial infections and subsequent surgical complications. Two types of membranes were prepared using an electrospinning method: PCL with bioglass and PCL with bioglass doped with Zn. The aim of this work was to investigate the influence of bioglass addition on the morphology, fiber diameter and composition of the membranes. The apatite-forming ability was examined in Simulated Body Fluid (SBF). The cytotoxicity of the membranes, ALP activity and in vitro mineralization were evaluated in cell culture. The mineralization and ALP activity was higher for polycaprolactone membranes modified with Zn doped bioglass than compared to pure PCL membranes or control material. The results proved that the presence of Zn2+ in the electrospun membranes = influence the osteogenic differentiation of cells

In vitro and in vivo studies on biocompatibility of carbon fibres

In the present study we focused on the in vitro and in vivo evaluation of two types of carbon fibres (CFs): hydroxyapatite modified carbon fibres and porous carbon fibres. Porous CFs used as scaffold for tissues regeneration could simultaneously serve as a support for drug delivery or biologically active agents which would stimulate the tissue growth; while addition of nanohydroxyapatite to CFs precursor can modify their biological properties (such as bioactivity) without subsequent surface modifications, making the process cost and time effective. Presented results indicated that fibre modification with HAp promoted formation of apatite on the fibre surface during incubation in simulated body fluid. The materials biocompatibility was determined by culturing human osteoblast-like cells of the line MG 63 in contact with both types of CFs. Both tested materials gave good support to adhesion and growth of bone-derived cells. Materials were implanted into the skeletal rat muscle and a comparative analysis of tissue reaction to the presence of the two types of CFs was done. Activities of marker metabolic enzymes: cytochrome c oxidase (CCO) and acid phosphatase were examined to estimate the effect of implants on the metabolic state of surrounding tissues. Presented results evidence the biocompatibility of porous CFs and activity that stimulates the growth of connective tissues. In case of CFs modified with hydroxyapatite the time of inflammatory reaction was shorter than in case of traditional CFs

Fatigue damage mechanisms associated with 'Tear-drop' cracking in UDIMET 720

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(92521) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Carbon Nanofibers Coated with Silicon/Calcium-Based Compounds for Medical Application

The aim of this work was to develop a method for the manufacture of carbon nanofibers in the form of mats containing silicon and calcium compounds with potential biomedical application. Carbon nanofibers (ECNF) were prepared from the electrospun polyacrylonitrile (PAN) nanofibers. The electrospun polymer nanofibers were heat treated up to 1000°C to obtain carbon nanofibers. The surface of ECNF was covered with a silica-calcium sol (ECNF+Si/Ca) by dip-coating technique followed by the stabilization process. Both types of carbon nanofibers, i.e., the as-received and covered with the sol, were tested to confirm their osteoconductive properties. Biological tests were performed, including genotoxicity, cytotoxicity, and alkaline phosphatase (ALP) activity. Morphology of adhering cells to nanofiber surface was described. The nanofibers were subjected to a bioactivity test in contact with SBF artificial plasma. Biological tests have revealed that the nanofiber-modified ECNF+Si/Ca in contact with osteoblast cells were biocompatible, and the level of cytotoxicity was lower compared to the control. The ALP activity of the modified nanofibers was higher than nonmodified nanofibers and indicates potential applications of such carbon materials in the form of mats as a substrate for bone tissue regeneration