4,255 research outputs found
Phonon Band Structure and Thermal Transport Correlation in a Layered Diatomic Crystal
To elucidate the relationship between a crystal's structure, its thermal
conductivity, and its phonon dispersion characteristics, an analysis is
conducted on layered diatomic Lennard-Jones crystals with various mass ratios.
Lattice dynamics theory and molecular dynamics simulations are used to predict
the phonon dispersion curves and the thermal conductivity. The layered
structure generates directionally dependent thermal conductivities lower than
those predicted by density trends alone. The dispersion characteristics are
quantified using a set of novel band diagram metrics, which are used to assess
the contributions of acoustic phonons and optical phonons to the thermal
conductivity. The thermal conductivity increases as the extent of the acoustic
modes increases, and decreases as the extent of the stop bands increases. The
sensitivity of the thermal conductivity to the band diagram metrics is highest
at low temperatures, where there is less anharmonic scattering, indicating that
dispersion plays a more prominent role in thermal transport in that regime. We
propose that the dispersion metrics (i) provide an indirect measure of the
relative contributions of dispersion and anharmonic scattering to the thermal
transport, and (ii) uncouple the standard thermal conductivity
structure-property relation to that of structure-dispersion and
dispersion-property relations, providing opportunities for better understanding
of the underlying physical mechanisms and a potential tool for material design.Comment: 30 pages, 10 figure
Picoheterotroph (Bacteria and Archaea) biomass distribution in the global ocean
We compiled a database of 39 766 data points consisting of flow cytometric and microscopical measurements of picoheterotroph abundance, including both Bacteria and Archaea. After gridding with 1° spacing, the database covers 1.3% of the ocean surface. There are data covering all ocean basins and depths except the Southern Hemisphere below 350m or from April until June. The average picoheterotroph biomass is 3.9 ± 3.6 ”g Cl-1 with a 20-fold decrease between the surface and the deep sea. We estimate a total ocean inventory of about 1.3 à 1029 picoheterotroph cells. Surprisingly, the abundance in the coastal regions is the same as at the same depths in the open ocean. Using an average of published open ocean measurements for the conversion from abundance to carbon biomass of 9.1 fg cell-1, we calculate a picoheterotroph carbon inventory of about 1.2 Pg C. The main source of uncertainty in this inventory is the conversion factor from abundance to biomass. Picoheterotroph biomass is ? 2 times higher in the tropics than in the polar oceans
Calibration of the LIGO displacement actuators via laser frequency modulation
We present a frequency modulation technique for calibration of the
displacement actuators of the LIGO 4-km-long interferometric gravitational-wave
detectors. With the interferometer locked in a single-arm configuration, we
modulate the frequency of the laser light, creating an effective length
variation that we calibrate by measuring the amplitude of the frequency
modulation. By simultaneously driving the voice coil actuators that control the
length of the arm cavity, we calibrate the voice coil actuation coefficient
with an estimated 1-sigma uncertainty of less than one percent. This technique
enables a force-free, single-step actuator calibration using a displacement
fiducial that is fundamentally different from those employed in other
calibration methods.Comment: 10 pages, 5 figures, submitted to Classical and Quantum Gravit
Precise calibration of LIGO test mass actuators using photon radiation pressure
Precise calibration of kilometer-scale interferometric gravitational wave
detectors is crucial for source localization and waveform reconstruction. A
technique that uses the radiation pressure of a power-modulated auxiliary laser
to induce calibrated displacements of one of the ~10 kg arm cavity mirrors, a
so-called photon calibrator, has been demonstrated previously and has recently
been implemented on the LIGO detectors. In this article, we discuss the
inherent precision and accuracy of the LIGO photon calibrators and several
improvements that have been developed to reduce the estimated voice coil
actuator calibration uncertainties to less than 2 percent (1-sigma). These
improvements include accounting for rotation-induced apparent length variations
caused by interferometer and photon calibrator beam centering offsets, absolute
laser power measurement using temperature-controlled InGaAs photodetectors
mounted on integrating spheres and calibrated by NIST, minimizing errors
induced by localized elastic deformation of the mirror surface by using a
two-beam configuration with the photon calibrator beams symmetrically displaced
about the center of the optic, and simultaneously actuating the test mass with
voice coil actuators and the photon calibrator to minimize fluctuations caused
by the changing interferometer response. The photon calibrator is able to
operate in the most sensitive interferometer configuration, and is expected to
become a primary calibration method for future gravitational wave searches.Comment: 13 pages, 6 figures, accepted by Classical and Quantum Gravit
Precise calibration of LIGO test mass actuators using photon radiation pressure
Precise calibration of kilometer-scale interferometric gravitational wave
detectors is crucial for source localization and waveform reconstruction. A
technique that uses the radiation pressure of a power-modulated auxiliary laser
to induce calibrated displacements of one of the ~10 kg arm cavity mirrors, a
so-called photon calibrator, has been demonstrated previously and has recently
been implemented on the LIGO detectors. In this article, we discuss the
inherent precision and accuracy of the LIGO photon calibrators and several
improvements that have been developed to reduce the estimated voice coil
actuator calibration uncertainties to less than 2 percent (1-sigma). These
improvements include accounting for rotation-induced apparent length variations
caused by interferometer and photon calibrator beam centering offsets, absolute
laser power measurement using temperature-controlled InGaAs photodetectors
mounted on integrating spheres and calibrated by NIST, minimizing errors
induced by localized elastic deformation of the mirror surface by using a
two-beam configuration with the photon calibrator beams symmetrically displaced
about the center of the optic, and simultaneously actuating the test mass with
voice coil actuators and the photon calibrator to minimize fluctuations caused
by the changing interferometer response. The photon calibrator is able to
operate in the most sensitive interferometer configuration, and is expected to
become a primary calibration method for future gravitational wave searches.Comment: 13 pages, 6 figures, accepted by Classical and Quantum Gravit
Developing reverse logistics programs: A resource based view
Previous research proposes a six-process model for reverse logistics (RL) program design and execution. This manuscript advances RL related knowledge by incorporating the previous model into a broader theoretical framework, namely, the Resource Based View (RBV) of the firm. The current research employs exploratory techniques to investigate the applicability of RBV and its main tenants within the RL context. Based on in-depth interviews with 16 executives from seven different companies, the relationships among resources. RL capabilities, and RL competencies are explored
Accurate calibration of test mass displacement in the LIGO interferometers
We describe three fundamentally different methods we have applied to
calibrate the test mass displacement actuators to search for systematic errors
in the calibration of the LIGO gravitational-wave detectors. The actuation
frequencies tested range from 90 Hz to 1 kHz and the actuation amplitudes range
from 1e-6 m to 1e-18 m. For each of the four test mass actuators measured, the
weighted mean coefficient over all frequencies for each technique deviates from
the average actuation coefficient for all three techniques by less than 4%.
This result indicates that systematic errors in the calibration of the
responses of the LIGO detectors to differential length variations are within
the stated uncertainties.Comment: 10 pages, 6 figures, submitted on 31 October 2009 to Classical and
Quantum Gravity for the proceedings of 8th Edoardo Amaldi Conference on
Gravitational Wave
Non-perturbative effects and the resummed Higgs transverse momentum distribution at the LHC
We investigate the form of the non-perturbative parameterization in both the
impact parameter (b) space and transverse momentum (p_T) space resummation
formalisms for the transverse momentum distribution of single massive bosons
produced at hadron colliders. We propose to analyse data on Upsilon
hadroproduction as a means of studying the non-perturbative contribution in
processes with two gluons in the initial state. We also discuss the theoretical
errors on the resummed Higgs transverse momentum distribution at the LHC
arising from the non-perturbative contribution.Comment: 22 pages, 10 figure
Cycle-centrality in complex networks
Networks are versatile representations of the interactions between entities
in complex systems. Cycles on such networks represent feedback processes which
play a central role in system dynamics. In this work, we introduce a measure of
the importance of any individual cycle, as the fraction of the total
information flow of the network passing through the cycle. This measure is
computationally cheap, numerically well-conditioned, induces a centrality
measure on arbitrary subgraphs and reduces to the eigenvector centrality on
vertices. We demonstrate that this measure accurately reflects the impact of
events on strategic ensembles of economic sectors, notably in the US economy.
As a second example, we show that in the protein-interaction network of the
plant Arabidopsis thaliana, a model based on cycle-centrality better accounts
for pathogen activity than the state-of-art one. This translates into
pathogen-targeted-proteins being concentrated in a small number of triads with
high cycle-centrality. Algorithms for computing the centrality of cycles and
subgraphs are available for download
- âŠ