Atomic Hydrogen Cleaning of Polarized GaAs Photocathodes

Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained GaAs cathodes used for producing highly polarized electrons. No depolarization was observed even when the optimum cleaning time of about 30 seconds was extended by a factor of 100

Surface Analysis of OFE-Copper X-Band Accelerating Structures and Possible Correlation to RF Breakdown Events

X-band accelerator structures meeting the Next Linear Collider (NLC) design requirements have been found to suffer vacuum surface damage caused by radio frequency (RF) breakdown, when processed to high electric-field gradients. Improved understanding of these breakdown events is desirable for the development of structure designs, fabrication procedures, and processing techniques that minimize structure damage. RF reflected wave analysis and acoustic sensor pickup have provided breakdowns localization in RF structures. Particle contaminations found following clean autopsy of four RF-processed travelling wave structures, have been catalogued and analyzed. Their influence on RF breakdown, as well as that of several other material-based properties, will be discussed.Comment: 21 pages, 8 figures, 4 tables, Submitted to JVST A as a proceeding of the 50th AVS conference (Baltimore, MD, 2-7 Nov 2003

Dependence of Maximum Trappable Field on Superconducting Nb3Sn Cylinder Wall Thickness

Uniform dipole magnetic fields from 1.9 to 22.4 kOe were permanently trapped, with high fidelity to the original field, transversely to the axes of hollow Nb3Sn superconducting cylinders. These cylinders were constructed by helically wrapping multiple layers of superconducting ribbon around a mandrel. This is the highest field yet trapped, the first time trapping has been reported in such helically wound taped cylinders, and the first time the maximum trappable field has been experimentally determined as a function of cylinder wall thickness.Comment: 8 pages, 4 figures, 1 table. PACS numbers: 74.60.Ge, 74.70.Ps, 41.10.Fs, 85.25.+

Projected Life of the SLAC Linac Braze Joints: Braze integrity and corrosion of cooling water hardware on accelerator sections

The objective of this study was to ascertain the condition of braze joints and cooling water hardware from an accelerator section after prolonged use. Metallographic analysis was used to examine critical sites on an accelerator section that had been in use for more than 30 years. The end flange assembly showed no internal operational damage or external environmental effects. The cavity cylinder stack showed no internal operational damage however the internal surface was highly oxidized. The internal surface of the cooling water tubing was uniformly corroding at a rate of about 1 mil per year and showed no evidence of pitting. Tee fitting internal surfaces are corroding at non-uniform rates due to general corrosion and pitting. Remaining service life of the cooling water jacket is estimated to be about 20 years or year 2027. At this time, water supply pressure will exceed allowable fitting pressure due to corrosion of tubing walls

Nuclear Magnetic Quadrupole Moments in Single Particle Approximation

A static magnetic quadrupole moment of a nucleus, induced by T- and P-odd nucleon-nucleon interaction, is investigated in the single-particle approximation. Models are considered allowing for analytical solution. The problem is also treated numerically in a Woods-Saxon potential with spin-orbit interaction. The stability of results is discussed.Comment: LATEX, 9 pages, 1 postscript figure available upon request from "[email protected]". BINP 94-4

Pion-Muon Asymmetry Revisited

Long ago an unexpected and unexplainable phenomena was observed. The distribution of muons from positive pion decay at rest was anisotropic with an excess in the backward direction relative to the direction of the proton beam from which the pions were created. Although this effect was observed by several different groups with pions produced by different means, the result was not accepted by the physics community, because it is in direct conflict with a large set of other experiments indicating that the pion is a pseudoscalar particle. It is possible to satisfy both sets of experiments if helicity-zero vector particles exist and the pion is such a particle. Helicity-zero vector particles have direction but no net spin. For the neutral pion to be a vector particle requires an additional modification to conventional theory as discussed herein. An experiment is proposed which can prove that the asymmetry in the distribution of muons from pion decay is a genuine physical effect because the asymmetry can be modified in a controllable manner. A positive result will also prove that the pion is NOT a pseudoscalar particle.Comment: 9 pages, 3 figure

Direct inversion of S-P differential arrival-times for Vp/Vs ratio in SE Asia

Open Access via Jisc Wiley agreementPeer reviewedPublisher PD