Improvement in Wear Resistance of Grade 37 Titanium by Microwave Plasma Oxy-Carburizing

Grade 37 titanium is widely used in racing applications thanks to its oxidation resistance up to 650 °C, but it suffers from poor wear and fretting resistance, especially at high temperature. In this paper, different surface modification techniques, namely, carburizing, coating by PVD-ZrO2 and a novel microwave plasma oxy-carburizing treatment, are investigated in terms of hardness, wear resistance and scratch hardness, compared to the untreated substrate. Numerical simulation allowed optimization of the design of the microwave plasma source, which operated at 2.45 GHz at atmospheric pressure. The proposed microwave plasma oxy-carburizing treatment is localized and can serve to improve the tribological properties of selected regions of the sample; compared to untreated Grade 37 titanium, the oxy-carburized layer presents a decrease in the wear rate at 450 °C against alumina of 54% and an increase in scratch hardness of more than three times

Hypoproteic diet in patients' community: reports from University of Pisa

Nutrition is considered by the National Health Authorities as part of the clinical care process. In this perspective, the catering service of a hospital represents a powerful therapeutic and educational aid for the in-patients.The catering service of our University Hospital in Pisa is based on a collection of standardized diets with indications concerning the type of patient which they are addressed. The present paper deals with our experience in this field, and in particular with the diets for renal patients.The so called "special" diets, such as low protein (0.6 g / kg b. w. / day) low phosphorus diet, the low protein (0.7 g / kg b.w./ day) vegetarian diet and the very low protein (0.3 g / kg b. w./day) low phosphorus diet are prescribed by the doctors and developed by the dietician for the individual patient.Since its preparation, the low-protein diets have several critical points, namely processing - packaging and distribution of the diet, no customization, the low protein artificial foods).In order t..

An integrated approach to the study of Ri de pomme, a painting by Julian Schnabel

The painting Ri de Pomme (1988) by American artist Julian Schnabel was recently subjected to an extensive and disputed restoration with polyvinyl acetate (PVAc) paints. To characterize and locate on the painting the materials used in the original and in the repainted areas, we employed several spectroscopic and chromatographic techniques. Fibre Optics Reflectance Spectroscopy (FORS), Micro-Raman, Pyrolysis-Gas Chromatography/Mass Spectrometry (Py- GC/MS) and Gas Chromatography/Mass Spectrometry (GC/MS) were used. The original and restoration paint layers were differentiated by a preliminary FORS survey. The pigments were studied with Micro-Raman and the oil binder was characterized by GC/MS. Moreover, the support of the painting, a weathered tarpaulin, was characterized by Py-GC/MS

A novel microwave and induction heating applicator for metal making: Design and testing

The use of microwave heating in primary metallurgy is gaining an increasing interest due to the possibility to selectively process ores and to volumetrically heat large amounts of low-thermal conductivity minerals. In this paper the study, development and testing of a new applicator combining the use of microwave and induction heating for rapid reduction of metal containing oxides is described. Numerical simulation was used in order to achieve the proper control over heat generation, considering the use of microwave solid state generators. A prototype, with a capacity up to 5 liters of standard input feed but with the predisposition for continuous processing has been designed, built and tested on reference loads like iron oxide powders and pellets. Results on the microwave heating part of the applicator indicate that it allows to efficiently and rapidly process these kinds of loads, which change from dielectric to conductors as reduction proceeds. The use of variable frequency solid state microwave generators allows to maximize energy efficiency and to controllably change the heating pattern inside the load

Laser hardening of steel sintered parts

The possibility of applying rapid and localized laser hardening to near-net shape parts, like the ones deriving from powder metallurgy (P/M) is investigated, demonstrating that even low alloyed steels (Fe + 2% Cu + 0,7% C) can be successfully heat treated with minimal or no dimensional variations. Laser hardening conditions have been selected on the basis of the results of the previous research, carried out by means of an Nd-YAG high power system [1]. To avoid some carbon loss, observed on previous activities, the samples have been protected by neutral atmosphere. The microstructural features of the laser hardened steels have been analyzed by optical microscopy, whereas the surface micro-geometry has been characterized by scanning electron microscope. Hardened depth (HD), hardened width (HW) and hardened area (HA) have been measured as well. As expected, the micro-hardness profiles present a sharp drop at low distance from the hardened surface. The typical splitting between hardened zone and heat-Affected zone (HAZ), well known from laser hardened fully dense steels, has been observed also on low-Alloy sintered steels. The use of a protective atmosphere has been helpful to control surface decarburization and to prevent oxidation. The research confirm that Laser transformation Hardening (LTH) is a suitable hardening process of P/M components, through the action of a scanning laser beam. The short heating time and the modest volume fraction structurally modified can contribute to avoid part distortion, in comparison with other hardening methods

Microwave-assisted preparation of multi principal element alloys by powder metallurgy approach

According to literature, the synthetic route to produce High entropy alloys (HEAs) should guarantee short alloying time, efficient cooling and capability to operate in controlled atmosphere. Such conditions can be achieved using high frequency electromagnetic fields, like microwave heating. In this work FeCoNiCrAl and FeCoNiCuAl, both equiatomic and reinforced by the 10% wt. of SiC were prepared by microwave assisted techniques. Results show that direct microwave heating of the powder precursors occurs, until the ignition conditions are reached. The temperature and duration of the microwave-assisted process result much lower than other conventional powder metallurgy routes, but at the cost of a higher residual porosity. Sample characterization confirmed that the powder metallurgy approach is suitable to retain the shape of the load imparted during forming by uniaxial pressing. The homogeneity of the samples resulted in being good in all cases, without the dendritic segregation typically occurring by liquid phase processing. © 2017 European Powder Metallurgy Association (EPMA