877 research outputs found
The Structure and Stratigraphy of the Skvor-Hartl Area, Southeast Linn County, Iowa
An area in southeast Linn County, Iowa is discussed in which a number of geological units from the Coralville limestone (Devonian) through the Silurian are exposed in a very small area. A map is included which shows the outcrop pattern and axis of the major structural feature, a sharp narrow northeast-southwest trending syncline. Smaller folds, and at least one fault are indicated. The study was based on exposures and a number of scores
Modelling the Mechanical Properties of Hydroxyapatite Scaffolds Produced by Digital Light Processing-Based Vat Photopolymerization
Porosity is a key feature in dictating the overall performance of biomedical scaffolds, with special relevance to mechanical properties. Usually, compressive strength and elastic modulus are the main parameters used to determine the potential mechanical suitability of porous scaffolds for bone repair. However, their assessment may not be so easy from an experimental viewpoint and, especially if the porosity is high, so reliable for brittle bioceramic foams. Hence, assessing the relationship between porosity and mechanical properties based only on the constitutive parameters of the solid material is a challenging and important task to predict the scaffold performance for optimization during design. In this work, a set of equations was used to predict the compressive strength and elastic modulus of bone-like hydroxyapatite scaffolds produced by digital light processing-based vat photopolymerization (total porosity about 80 vol.%). The compressive strength was found to depend on total porosity, following a power-law approximation. The relationship between porosity and elastic modulus was well fitted by second-order power law, with relative density and computational models obtained by numerical simulations
Comparison between bioactive sol-gel and melt-derived glasses/glass-ceramics based on the multicomponent SiO2-P2O5-CaO-MgO-Na2O-K2O System
Bioactive sol-gel glasses are attractive biomaterials from both technological and functional viewpoints as they require lower processing temperatures compared to their melt-derived counterparts and exhibit a high specific surface area due to inherent nanoporosity. However, most of these materials are based on relatively simple binary or ternary oxide systems since the synthesis of multicomponent glasses via sol-gel still is a challenge. This work reports for the first time the production and characterization of sol-gel materials based on a six-oxide basic system (SiO2-P2O5-CaO-MgO-Na2O-K2O). It was shown that calcination played a role in inducing the formation of crystalline phases, thus generating glass-ceramic materials. The thermal, microstructural and textural properties, as well as the in vitro bioactivity, of these sol-gel materials were assessed and compared to those of the melt-derived counterpart glass with the same nominal composition. In spite of their glass-ceramic nature, these materials retained an excellent apatite-forming ability, which is key in bone repair applications
A guided walk through the world of mesoporous bioactive glasses (MBGs): Fundamentals, processing, and applications
Bioactive glasses (BGs) are traditionally known to be able to bond to living bone and stimulate bone regeneration. The production of such materials in a mesoporous form allowed scientists to dramatically expand the versatility of oxide-based glass systems as well as their applications in biomedicine. These nanostructured materials, called mesoporous bioactive glasses (MBGs), not only exhibit an ultrafast mineralization rate but can be used as vehicles for the sustained delivery of drugs, which are hosted inside the mesopores, and therapeutic ions, which are released during material dissolution in contact with biological fluids. This review paper summarizes the main strategies for the preparation of MBGs, as well as their properties and applications in the biomedical field, with an emphasis on the methodological aspects and the promise of hierarchical systems with multiscale porosity
Foam replica method in the manufacturing of bioactive glass scaffolds: Out-of-date technology or still underexploited potential?
Since 2006, the foam replica method has been commonly recognized as a valuable technology for the production of highly porous bioactive glass scaffolds showing three-dimensional, open-cell structures closely mimicking that of natural trabecular bone. Despite this, there are important drawbacks making the usage of foam-replicated glass scaffolds a difficult achievement in clinical practice; among these, certainly the high operator-dependency of the overall manufacturing process is one of the most crucial, limiting the scalability to industrial production and, thus, the spread of foam-replicated synthetic bone substitutes for effective use in routine management of bone defect. The present review opens a window on the versatile world of the foam replica tech-nique, focusing the dissertation on scaffold properties analyzed in relation to various processing parameters, in order to better understand which are the real issues behind the bottleneck that still puts this technology on the Olympus of the most used techniques in laboratory practice, without moving, unfortunately, to a more concrete application. Specifically, scaffold morphology, mechanical and mass transport properties will be reviewed in detail, considering the various templates proposed till now by several research groups all over the world. In the end, a comprehensive overview of in vivo studies on bioactive glass foams will be provided, in order to put an emphasis on scaffold performances in a complex three-dimensional environment
Hydroxyapatite for biomedical applications: A short overview
Calcium phosphates (CaPs) are biocompatible and biodegradable materials showing a great promise in bone regeneration as good alternative to the use of auto-and allografts to guide and support tissue regeneration in critically-sized bone defects. This can be certainly attributed to their similarity to the mineral phase of natural bone. Among CaPs, hydroxyapatite (HA) deserves a special attention as it, actually is the main inorganic component of bone tissue. This review offers a comprehensive overview of past and current trends in the use of HA as grafting material, with a focus on manufacturing strategies and their effect on the mechanical properties of the final products. Recent advances in materials processing allowed the production of HA-based grafts in different forms, thus meeting the requirements for a range of clinical applications and achieving enthusiastic results both in vitro and in vivo. Furthermore, the growing interest in the optimization of three-dimensional (3D) porous grafts, mimicking the trabecular architecture of human bone, has opened up new challenges in the development of bone-like scaffolds showing suitable mechanical performances for potential use in load bearing anatomical sites
- …