Laser pulse effects on plasma-sprayed and bulk tungsten

Tungsten (W) is considered a promising plasma-facing material for protecting the divertor of the ITER (International Thermonuclear Experimental Reactor). The effects on W of transient thermal loads of high energy occurring in a tokamak under operative conditions have been simulated through a single laser pulse delivered by an Nd:YAG laser. Bulk and plasma-sprayed (PS) samples have been submitted to tests and successively examined via SEM (scanning electron microscopy) observations. In both types of materials, the laser pulse induces similar effects: (i) a crater forms in the spot central area; (ii) all around the area, the ejection and the movement of molten metal give rise to a ridge; (iii) in a more external area, the surface shows plates with jagged boundaries and cracks induced by thermal stresses; (iv) the pores present in the original material become preferred ablation sites. However, the affected surface area in PS samples is larger and asymmetric if compared to that of bulk material. Such a difference has been explained by considering how microstructural characteristics influence heat propagation from the irradiated spot, and it was found that grain size and shape play a decisive role

Zn–al layered double hydroxides synthesized on aluminum foams for fluoride removal from water

Fluoride excess in water represents an environmental issue and a risk for human health since it can cause several diseases, such as fluorosis, osteoporosis, and damage of the nervous system. Layered double hydroxides (LDHs) can be exploited to remove this contaminant from water by taking advantage of their high ion-exchange capability. LDHs are generally mixed with polluted water in the form of powders, which then cause the problem of uneasy separation of the contaminated LDH sludge from the purified liquid. In this work, Zn–Al LDH films were directly grown in situ on aluminum foams that acted both as the reactant and substrate. This method enabled the removal of fluoride ions by simple immersion, with ensuing withdrawal of the foam from the de-contaminated water. Different LDH synthesis methods and aluminum foam types were investigated to improve the adsorption process. The contact time, initial fluoride concentration, adsorbent dosage, and pH were studied as the parameters that affect the fluoride adsorption capacity and efficiency. The highest absorption efficiency of approximately 70% was obtained by using two separate growth methods after four hours, and it effectively reduced the fluoride concentration from 3 mg/L to 1.1 mg/L, which is below the threshold value set by WHO for drinking water

Two different acid oxidation syntheses to open C60 fullerene for heavy metal detection

Graphene oxide quantum dots (GOQDs) can be synthesized through a large variety of synthesis methods starting from different carbon allotropes such as nanotubes, graphite, C60 and exploiting various synthesis and reactions. These different approaches have great influence on the properties of the obtained materials, and, consequently, on the potential applications. In this work, Buckminster C60 fullerene has been used to prepare unfolded fullerene nanoparticles (UFNPs) via two distinct synthesis methods namely: Hummer and H2 SO4 + HNO3 solution. The different characteristics of the final materials and the different response in the presence of heavy metal ions have been investigated in view of sensing applications of water contamination

Discriminating between different heavy metal ions with fullerene-derived nanoparticles

A novel type of graphene-like nanoparticle, synthesized by oxidation and unfolding of C-60 buckminsterfullerene fullerene, showed multiple and reproducible sensitivity to Cu2+, Pb2+, Cd2+, and As(III) through different degrees of fluorescence quenching or, in the case of Cd2+, through a remarkable fluorescence enhancement. Most importantly, only for Cu2+ and Pb2+, the fluorescence intensity variations came with distinct modifications of the optical absorption spectrum. Time-resolved fluorescence study confirmed that the common origin of these diverse behaviors lies in complexation of the metal ions by fullerene-derived carbon layers, even though further studies are required for a complete explanation of the involved processes. Nonetheless, the different response of fluorescence and optical absorbance towards distinct cationic species makes it possible to discriminate between the presence of Cu2+, Pb2+, Cd2+, and As(III), through two simple optical measurements. To this end, the use of a three-dimensional calibration plot is discussed. This property makes fullerene-derived nanoparticles a promising material in view of the implementation of a selective, colorimetric/fluorescent detection system

Colorimetric detection of chromium(VI) ions in water using unfolded-fullerene carbon nanoparticles

Water pollution caused by hexavalent chromium (Cr(VI)) ions represents a serious hazard for human health due to the high systemic toxicity and carcinogenic nature of this metal species. The optical sensing of Cr(VI) through specifically engineered nanomaterials has recently emerged as a versatile strategy for the application to easy-to-use and cheap monitoring devices. In this study, a one-pot oxidative method was developed for the cage opening of C60 fullerene and the synthesis of stable suspensions of N-doped carbon dots in water–THF solutions (N-CDs-W-THF). The N-CDs-W-THF selectively showed variations of optical absorbance in the presence of Cr(VI) ions in water through the arising of a distinct absorption band peaking at 550 nm, i.e., in the transparency region of pristine material. Absorbance increased linearly, with the ion concentration in the range 1–100 µM, thus enabling visual and ratiometric determination with a limit of detection (LOD) of 300 nM. Selectivity and possible interference effects were tested over the 11 other most common heavy metal ions. The sensing process occurred without the need for any other reactant or treatment at neutral pH and within 1 min after the addition of chromium ions, both in deionized and in real water sam-ples

Effect of starch-based biomaterials on the in vitro proliferation and viability of osteoblast-like cells

The cytotoxicity of starch-based polymers was investigated using different methodologies. Poly-L-lactic acid (PLLA) was used as a control for comparison purposes. Extracts of four different starch-based blends (corn starch and ethylene vinyl alcohol (SEVA-C), corn starch and cellulose acetate (SCA), corn starch and polycaprolactone (SPCL) and starch and poly-lactic acid (SPLA70) were prepared in culture medium and their toxicity was analysed. Osteoblast-like cells (SaOs-2) were incubated with the extracts and cell viability was assessed using the MTT test and a lactate dehydrogenase (LDH) assay. In addition DNA and total protein were quantified in order to evaluate cell proliferation. Cells were also cultured in direct contact with the polymers for 3 and 7 days and observed in light and scanning electron microscopy (SEM). LDH and DNA quantification revealed to be the most sensitive tests to assess respectively cell viability and cell proliferation after incubation with starch-based materials and PLLA. SCA was the starch blend with higher cytotoxicity index although similar to PLLA polymer. Cell adhesion tests confirmed the worst performance of the blend of starch with cellulose acetate but also showed that SPCL does not perform as well as it could be expected. All the other materials were shown to present a comparable behaviour in terms of cell adhesion showing slight differences in morphology that seem to disappear for longer culture times. The results of this study suggest that not only the extract of the materials but also their three-dimensional form has to be biologically tested in order to analyse material-associated parameters that are not possible to consider within the degradation extract. In this study, the majority of the starch-based biomaterials presented very promising results in terms of cytotoxicity, comparable to the currently used biodegradable PLLA which might lead the biocompatibility evaluation of those novel biomaterials to other studies.Fundação para a Ciência e a Tecnologia (FCT

Regulation of CEACAM1 transcription in human breast epithelial cells

<p>Abstract</p> <p>Background</p> <p>Carcinoembryonic antigen cell adhesion molecule 1 (CEACAM1) is a transmembrane protein with multiple functions in different cell types. CEACAM1 expression is frequently mis-regulated in cancer, with down-regulation reported in several tumors of epithelial origin and <it>de novo </it>expression of CEACAM1 in lung cancer and malignant melanoma. In this report we analyzed the regulation of CEACAM1 expression in three breast cancer cell lines that varied in CEACAM1 expression from none (MCF7) to moderate (MDA-MB-468) to high (MCF10A, comparable to normal breast).</p> <p>Results</p> <p>Using <it>in vivo </it>footprinting and chromatin immunoprecipitation experiments we show that the <it>CEACAM1 </it>proximal promoter in breast cells is bound in its active state by SP1, USF1/USF2, and IRF1/2. When down-regulated the <it>CEACAM1 </it>promoter remains accessible to USF2 and partially accessible to USF1. Interferon-γ up-regulates CEACAM1 mRNA by a mechanism involving further induction of IRF-1 and USF1 binding at the promoter. As predicted by this analysis, silencing of IRF1 and USF1 but not USF2 by RNAi resulted in a significant decrease in CEACAM1 protein expression in MDA-MB-468 cells. The inactive <it>CEACAM1 </it>promoter in MCF7 cells exhibits decreased histone acetylation at the promoter region, with no evidence of H3K9 or H3K27 trimethylation, histone modifications often linked to condensed chromatin structure.</p> <p>Conclusions</p> <p>Our data suggest that transcription activators USF1 and IRF1 interact to modulate CEACAM1 expression and that the chromatin structure of the promoter is likely maintained in a poised state that can promote rapid induction under appropriate conditions.</p

Pegylated IFN-α sensitizes melanoma cells to chemotherapy and causes premature senescence in endothelial cells by IRF-1-mediated signaling

Pegylated interferon-α2b (pIFN-α) is an integral part of the drug regimen currently employed against melanoma. Interferon regulatory factor-1 (IRF-1) has an important role in the transcriptional regulation of the IFN response, cell cycle and apoptosis. We have studied pIFN-α-induced responses when combined with the chemotherapy agent, vinblastine (VBL), in tumor and endothelial cell lines and the connection to IRF-1 signaling. Levels of IRF-1/IRF-2 protein expression were found to be decreased in tumor versus normal tissues. pIFN-α induced IRF-1 signaling in human melanoma (M14) and endothelial (EA.hy926) cells and enhanced cell death when combined with VBL. Upon combined IFN-α and VBL treatment, p21 expression, poly (ADP-ribose) polymerase cleavage and activated Bak levels were increased in M14 cells. An increase in p21 and cyclin D1 expression occurred in EA.hy926 cells after 6 h of treatment with pIFN-α, which dissipated by 24 h. This biphasic response, characteristic of cellular senescence, was more pronounced upon combined treatment. Exposure of the EA.hy926 cells to pIFN-α was associated with an enlarged, multinucleated, β-galactosidase-positive senescent phenotype. The overall therapeutic mechanism of IFN-α combined with chemotherapy may be due to both direct tumor cell death via IRF-1 signaling and by premature senescence of endothelial cells and subsequent effects on angiogenesis in the tumor microenvironment

Impact of SARS-CoV-2 Infection on the Course of Inflammatory Bowel Disease in Patients Treated with Biological Therapeutic Agents: A Case-Control Study.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has raised concerns in patients with inflammatory bowel disease (IBD), not only due to consequences of coronavirus disease 2019 itself but also as a possible cause of IBD relapse. The main objective of this study was to assess the role of SARS-CoV-2 in IBD clinical recurrence in a cohort of patients undergoing biological therapy. Second, we evaluated the difference in C-reactive protein (CRP) levels between the start and end of the follow-up period (ΔCRP) and the rate of biological therapy discontinuation. Patients with IBD positive for SARS-CoV-2 infection were compared with non-infected patients. IBD recurrence was defined as the need for intensification of current therapy. We enrolled 95 IBD patients with SARS-CoV-2 infection and 190 non-infected patients. During follow-up, 11 of 95 (11.6%) SARS-CoV-2-infected patients experienced disease recurrence compared to 21 of 190 (11.3%) in the control group (p = 0.894). Forty-six (48.4%) SARS-CoV-2-infected patients discontinued biological therapy versus seven (3.7%) in the control group (p &lt; 0.01). In the multivariate analysis, biological agent discontinuation (p = 0.033) and ΔCRP (p = 0.017), but not SARS-CoV-2 infection (p = 0.298), were associated with IBD recurrence. SARS-CoV-2 infection was not associated with increased IBD recurrence rates in this cohort of patients treated with biological agents