448 research outputs found
Electronic structure of intentionally disordered AlAs/GaAs superlattices
We use realistic pseudopotentials and a plane-wave basis to study the
electronic structure of non-periodic, three-dimensional, 2000-atom
(AlAs)_n/(GaAs)_m (001) superlattices, where the individual layer thicknesses
n,m = {1,2,3} are randomly selected. We find that while the band gap of the
equivalent (n = m = 2) ordered superlattice is indirect, random fluctuations in
layer thicknesses lead to a direct gap in the planar Brillouin zone, strong
wavefunction localization along the growth direction, short radiative
lifetimes, and a significant band-gap reduction, in agreement with experiments
on such intentionally grown disordered superlattices.Comment: 10 pages, REVTeX and EPSF macros, 4 figures in postscript. e-mail to
[email protected]
Smart cellulose fibers coated with carbon nanotube networks
Smart multi-walled carbon nanotube (MWCNT)-coated cellulose fibers with a unique sensing ability were manufactured by a simple dip coating process. The formation of electrically-conducting MWCNT networks on cellulose mono- and multi-filament fiber surfaces was confirmed by electrical resistance measurements and visualized by scanning electron microscopy. The interaction between MWCNT networks and cellulose fiber was investigated by Raman spectroscopy. The piezoresistivity of these fibers for strain sensing was investigated. The MWCNT-coated cellulose fibers exhibited a unique linear strain-dependent electrical resistance change up to 18% strain, with good reversibility and repeatability. In addition, the sensing behavior of these fibers to volatile molecules (including vapors of methanol, ethanol, acetone, chloroform and tetrahydrofuran) was investigated. The results revealed a rapid response, high sensitivity and good reproducibility for these chemical vapors. Besides, they showed good selectivity to different vapors. It is suggested that the intrinsic physical and chemical features of cellulose fiber, well-formed MWCNT networks and favorable MWCNT-cellulose interaction caused the unique and excellent sensing ability of the MWCNT-coated cellulose fibers, which have the potential to be used as smart materials
Recommended from our members
Surface, interphase and tensile properties of unsized, sized and heat treated basalt fibres
Recycling of fibre reinforced polymers is in the focus of several investigations. Chemical and thermal treatments of composites are the common ways to separate the reinforcing fibres from the polymer matrices. However, most sizings on glass and basalt fibre are not designed to resist high temperatures. Hence, a heat treatment might also lead to a sizing removal, a decrease of mechanical performance and deterioration in fibre-matrix adhesion. Different basalt fibres were investigated using surface analysis methods as well as single fibre tensile tests and single fibre pull-out tests in order to reveal the possible causes of these issues. Heat treatment in air reduced the fibre tensile strength in the same level like heat treatment in nitrogen atmosphere, but it influenced the wetting capability. Re-sizing by a coupling agent slightly increased the adhesion strength and reflected a decreased post-debonding friction
Vascular Injury After Whole Thoracic X-Ray Irradiation in the Rat
Purpose To study vascular injury after whole thoracic irradiation with single sublethal doses of X-rays in the rat and to develop markers that might predict the severity of injury. Methods and Materials Rats that received 5- or 10-Gy thorax-only irradiation and age-matched controls were studied at 3 days, 2 weeks, and 1, 2, 5, and 12 months. Several pulmonary vascular parameters were evaluated, including hemodynamics, vessel density, total lung angiotensin-converting enzyme activity, and right ventricular hypertrophy. Results By 1 month, the rats in the 10-Gy group had pulmonary vascular dropout, right ventricular hypertrophy, increased pulmonary vascular resistance, increased dry lung weights, and decreases in total lung angiotensin-converting enzyme activity, as well as pulmonary artery distensibility. In contrast, irradiation with 5 Gy resulted in only a modest increase in right ventricular weight and a reduction in lung angiotensin-converting enzyme activity. Conclusion In a previous investigation using the same model, we observed that recovery from radiation-induced attenuation of pulmonary vascular reactivity occurred. In the present study, we report that deterioration results in several vascular parameters for ≤1 year after 10 Gy, suggesting sustained remodeling of the pulmonary vasculature. Our data support clinically relevant injuries that appear in a time- and dose-related manner after exposure to relatively low radiation doses
Recommended from our members
Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: A review
The current paper provides an overview to emphasize the role of functionalization of multiwalled carbon nanotubes (MWCNTs) in manipulating cure kinetics of epoxy nanocomposites, which itself determines ultimate properties of the resulting compound. In this regard, the most commonly used functionalization schemes, that is, carboxylation and amidation, are thoroughly surveyed to highlight the role of functionalized nanotubes in controlling the rate of autocatalytic and vitrification kinetics. The current literature elucidates that the mechanism of curing in epoxy/MWCNTs nanocomposites remains almost unaffected by the functionalization of carbon nanotubes. On the other hand, early stage facilitation of autocatalytic reactions in the presence of MWCNTs bearing amine groups has been addressed by several researchers. When carboxylated nanotubes were used to modify MWCNTs, the rate of such reactions diminished as a consequence of heterogeneous dispersion within the epoxy matrix. At later stages of curing, however, the prolonged vitrification was seen to be dominant. Thus, the type of functional groups covalently located on the surface of MWCNTs directly affects the degree of polymer-nanotube interaction followed by enhancement of curing reaction. Our survey demonstrated that most widespread efforts ever made to represent multifarious surface-treated MWCNTs have not been directed towards preparation of epoxy nanocomposites, but they could result in property synergism
Soil phosphorus (P) budgets, P availability and P use efficiencies in conventional and organic cropping systems of the DOK trial
Cropping systems rely on the provision of adequate amounts of phosphorus (P) to enable stable crop yields. A balanced application of P is necessary to avoid reduced crop yields (in case of too low application rates), but also to avoid P losses to other ecosystems (in case of too high application rates). While in conventional cropping systems the use of synthetic P fertilizers is common practice, organic cropping systems mostly rely on organic P inputs such as farmyard manure or compost. We aimed to answer if different cropping systems attain balanced P application rates in the long run, and how plant P availability is affected by different cropping systems and forms of fertilizers applied
Mykorrhiza im ökologischen Landbau
The mycorrhizal symbiosis plays a major role in plant nutrient acquisition, pathogen control and soil stabilisation in land use systems with a low input of external resources. The use of inocula of mycorrhizal fungi for the development of sustainable agricultural production systems in Europe is still scarce. Since it was found that even in organically managed soils and particularly in substrates mycorrhizas can be limited, a set of recently introduced commercial inocula and 10 pre-selected strains of mycorrhizal fungi were multiplied and screened under farm conditions. Poinsettia, Pelargonium, leak and strawberry were used as test plants, which were inoculated in the seeding or potting substrates. There was a strong interaction between mycorrhizal fungi strains and crop. Mycorrhiza effects were found to be most pronounced in early seedling stages and, therefore, this phase of development should be investigated more intensively applying a combination of selected mycorrhizal fungal strains
Recommended from our members
Influence of microwave plasma treatment on the surface properties of carbon fibers and their adhesion in a polypropylene matrix
A commercially available carbon fiber (CF) with an epoxy-based sizing (EP-sized CF) and an unsized CF have been plasma treated to study the effect on the fiber-matrix adhesion towards a polypropylene matrix. The EP-sized fiber was chosen because of its predictable low adhesion in a polypropylene (PP) matrix. The fibers have been modified using a microwave low-pressure O2/CO2/N2-gas plasma source (Cyrannus®) developed at IWS in a batch process. One aim of this study was the evaluation of parameters using high energies and short time periods in the plasma chamber to see the effect on mechanical performance of CF. These results will be the fundamental work for a planned continuous plasma modification line. The CF surface was characterized by determining the surface energies, single fiber tensile strength and XPS analysis. The adhesion behavior before and after plasma treatment was studied by single fiber pull-out test (SFPO) and scanning electron microscopy (SEM). It was shown that the CO2- and O2-plasma increases the number of functional groups on the fiber surface during short time plasma treatment of 30 s. Carboxylic groups on the unsized CF surface resulting from O2-plasma treatment lead to an enhanced fiber-matrix adhesion, whereas the fiber strength was merely reduced
Influence of microwave plasma treatment on the surface properties of carbon fibers and their adhesion in a polypropylene matrix
A commercially available carbon fiber (CF) with an epoxy-based sizing (EP-sized CF) and an unsized CF have been plasma treated to study the effect on the fiber-matrix adhesion towards a polypropylene matrix. The EP-sized fiber was chosen because of its predictable low adhesion in a polypropylene (PP) matrix. The fibers have been modified using a microwave low-pressure O2/CO2/N2-gas plasma source (Cyrannus®) developed at IWS in a batch process. One aim of this study was the evaluation of parameters using high energies and short time periods in the plasma chamber to see the effect on mechanical performance of CF. These results will be the fundamental work for a planned continuous plasma modification line. The CF surface was characterized by determining the surface energies, single fiber tensile strength and XPS analysis. The adhesion behavior before and after plasma treatment was studied by single fiber pull-out test (SFPO) and scanning electron microscopy (SEM). It was shown that the CO2- and O2-plasma increases the number of functional groups on the fiber surface during short time plasma treatment of 30 s. Carboxylic groups on the unsized CF surface resulting from O2-plasma treatment lead to an enhanced fiber-matrix adhesion, whereas the fiber strength was merely reduced
- …