Simulations of shock generation and propagation in laser-plasmas

AbstractWe analyze the results of a recent experiment performed at the PALS laboratory and concerning ablation pressure at 0.44 µm laser wavelength measured at irradiance up to 2 × 1014 W/cm2. Using the code "ATLANT," we have performed two-dimensional (2D) hydrodynamics simulations. Results show that 2D effects did not affect the experiment and also give evidence of the phenomenon of delocalized absorption of laser light

Basic features of electromagnetic pulse generated in a laser-target chamber at 3-TW laser facility PALS

n/

Study of shock waves generation, hot electron production and role of parametric instabilities in an intensity regime relevant for the shock ignition

We present experimental results at intensities relevant to Shock Ignition obtained at the sub-ns Prague Asterix Laser System in 2012 . We studied shock waves produced by laser-matter interaction in presence of a pre-plasma. We used a first beam at 1ω (1315 nm) at 7 × 10 13 W/cm 2 to create a pre-plasma on the front side of the target and a second at 3ω (438 nm) at ∼ 10 16 W/cm 2 to create the shock wave. Multilayer targets composed of 25 (or 40 μm) of plastic (doped with Cl), 5 μm of Cu (for Kα diagnostics) and 20 μm of Al for shock measurement were used. We used X-ray spectroscopy of Cl to evaluate the plasma temperature, Kα imaging and spectroscopy to evaluate spatial and spectral properties of the fast electrons and a streak camera for shock breakout measurements. Parametric instabilities (Stimulated Raman Scattering, Stimulated Brillouin Scattering and Two Plasmon Decay) were studied by collecting the back scattered light and analysing its spectrum. Back scattered energy was measured with calorimeters. To evaluate the maximum pressure reached in our experiment we performed hydro simulations with CHIC and DUED codes. The maximum shock pressure generated in our experiment at the front side of the target during laser-interaction is 90 Mbar. The conversion efficiency into hot electrons was estimated to be of the order of ∼ 0.1% and their mean energy in the order ∼50 keV. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distributio

X-ray microscopy of living multicellular organisms with the Prague Asterix Iodine Laser System

Soft X-ray contact microscopy (SXCM) experiments have been performed using the Prague Asterix Iodine Laser System (PALS). Laser wavelength and pulse duration were λ = 1.314 μm and τ (FWHM) = 450 ps, respectively. Pulsed X rays were generated using teflon, gold, and molybdenum targets with laser intensities I ≥ 1014 W/cm2. Experiments have been performed on the nematodes Caenorhabditis elegans. Images were recorded on PMMA photo resists and analyzed using an atomic force microscope operating in contact mode. Our preliminary results indicate the suitability of the SXCM for multicellular specimens

Shock pressure induced by 0.44 [mu]m laser radiation on aluminum targets

Shock pressure generated in aluminum targets due to the interaction of 0.44 μm (3 ω of iodine laser) laser radiation has been studied. The laser intensity profile was smoothed using phase zone plates. Aluminum step targets were irradiated at an intensity I ≈ 1014 W/cm2. Shock velocity in the aluminum target was estimated by detecting the shock luminosity from the target rear using a streak camera to infer the shock pressure. Experimental results show a good agreement with the theoretical model based on the delocalized laser absorption approximation. In the present report, we explicitly discuss the importance of target thickness on the shock pressure scaling

DIAMOND DETECTORS FOR CHARACTERIZATION OF LASER-GENERATED PLASMA

Abstract -CVD mono-crystalline diamond films were employed as detectors of the Introduction -Laser-generated plasma is characterized by high temperature and density