16 research outputs found
Intercalated vs Nonintercalated Morphologies in Donor-Acceptor Bulk Heterojunction Solar Cells: PBTTT:Fullerene Charge Generation and Recombination Revisited
In this Letter, we study the role of the donor:acceptor interface nanostructure upon charge separation and recombination in organic photovoltaic devices and blend films, using mixtures of PBTTT and two different fullerene derivatives (PC70BM and ICTA) as models for intercalated and nonintercalated morphologies, respectively. Thermodynamic simulations show that while the completely intercalated system exhibits a large free-energy barrier for charge separation, this barrier is significantly lower in the nonintercalated system and almost vanishes when energetic disorder is included in the model. Despite these differences, both femtosecond-resolved transient absorption spectroscopy (TAS) and time-delayed collection field (TDCF) exhibit extensive first-order losses in both systems, suggesting that geminate pairs are the primary product of photoexcitation. In contrast, the system that comprises a combination of fully intercalated polymer:fullerene areas and fullerene-aggregated domains (1:4 PBTTT:PC70BM) is the only one that shows slow, second-order recombination of free charges, resulting in devices with an overall higher short-circuit current and fill factor. This study therefore provides a novel consideration of the role of the interfacial nanostructure and the nature of bound charges and their impact upon charge generation and recombination
Charge Separation in Intermixed Polymer:PC70BM Photovoltaic Blends: Correlating Structural and Photophysical Length Scales as a Function of Blend Composition
A key challenge in achieving control over photocurrent generation by bulk-heterojunction organic solar cells is understanding how the morphology of the active layer impacts charge separation and in particu-lar the separation dynamics within molecularly-intermixed donor-acceptor domains versus the dynamics between phase-segregated domains. This paper addresses this issue by studying blends and devic-es of the amorphous silicon-indacenodithiophene polymer SiIDT-DTBT and the acceptor PC70BM. By changing the blend composition, we modulate the size and density of the pure and intermixed domains on the nanometre lengthscale. Laser spectroscopic studies show that these changes in morphology cor-relate quantitatively with the changes in charge separation dynamics on the nanosecond timescale, and with device photocurrent densities. At low fullerene compositions, where only a single, molecularly in-termixed polymer-fullerene phase is observed, photoexcitation results in a ~30% charge loss from gem-inate polaron pair recombination, which is further studied via light intensity experiments showing that the radius of the polaron pairs in the intermixed phase is 3-5 nm. At high fullerene compositions (≥ 67%), where the intermixed domains are 1-3 nm and the pure fullerene phases reach ~4 nm, the geminate recombination is suppressed by the reduction of the intermixed phase making the fullerene domains accessible for electron escape
Diversifying crop rotations with temporary grasslands : potentials for weed management and farmland biodiversity
Crop rotation may be used to prevent the continuous selection of particular weed species adapted to one crop type. This might be useful for weed management, economy in herbicide applications and promoting biodiversity. Common simple crop sequences might be diversified by introducing perennial forage crops. Impacts of such perennial crops on weeds were studied with four approaches:
1) Large-scale weed surveys in 632 fields in western France showed that weed species composition differed most strongly between perennial alfalfa crops and annual crops. Comparisons of fields before, during and after perennial alfalfa suggested that community composition varies in a cyclic way during such crop rotations. Several weed species problematic in annual crops were suppressed during and after perennial crops, but the appearance of other species led to equal or even higher plant diversities.
2) A 3-year field experiment with contrasting crop management options allowed an investigation of the underlying mechanisms for this: The absence of soil tillage reduced weed emergence but increased the survival of established plants. The permanent vegetation cover and frequent hay cuttings reduced weed growth, plant survival and seed production.
3) Greenhouse experiments testing the regrowth ability of individual plants after cutting showed strong differences between species and functional groups. An two-factorial experiment suggested that the negative impacts of cutting and competition on weed growth were mainly additive.
4) Special measurements of weed seed predation in the field experiment showed positive correlations with vegetation cover, indicating that this ecosystem service may be particularly fostered by perennial crops. Consistent preferences of seed predators for certain weed species indicates that seed predation may be another cause of the observed weed community shifts.Fruchtfolgen können dazu dienen, die kontinuierliche Selektion von Unkrautarten zu verhindern, die an eine bestimmte Kultur angepasst sind. Dies könnte dem Unkrautmanagement, der Einsparung von Herbiziden, und der Biodiversität dienen. Heutige, sehr einfache Furchtfolgen könnten durch mehrjährige Futterkulturen diversifiziert werden. Die Einflüsse solcher mehrjähriger Kulturen auf Unkräuter wurden in vier Ansätzen untersucht:
1) Vegetationsaufnahmen auf 632 Feldern in Westfrankreich zeigten, dass die Unkrautzusammensetzung zwischen mehrjährigen Futterkulturen und einjährigen Kulturen stark variiert. Der Vergleich von Feldern vor, während und nach mehrjährigen Futterkulturen legte nahe, dass die Pflanzengemeinschaft während solcher Fruchtfolgen zyklisch variiert. Mehrere problematische Unkrautarten wurden während und nach den mehrjährigen Kulturen zurückgedrängt. Das Auftauchen anderer Arten führte jedoch zu einer gleichbleibenden oder leicht erhöhten Pflanzenvielfalt.
2) Ein dreijähriger Feldversuch mit verschiedenen Bearbeitungsoptionen ermöglichte es, die zugrunde liegenden Mechanismen zu untersuchen: Die fehlende Bodenbearbeitung hat das Auflaufen der Unkräuter reduziert und das Überleben der adulten Pflanzen erhöht. Die permanente Vegetationsbedeckung und die häufigen Heuschnitte haben das Wachstum, das Überleben und die Samenproduktion vermindert.
3) Gewächshausexperimente zum Nachwachsen von Unkrautpflanzen nach Heuschnitten zeigten große Unterschiede zwischen verschiedenen Arten und funktionellen Gruppen. Ein Experiment mit zwei Faktoren lässt vermuten, dass die negativen Effekte der Schnitte und der Konkurrenz auf das Unkrautwachstum sich addieren.
4) Spezielle Messungen der Prädation von Unkrautsamen auf den untersuchten Feldern zeigten positive Korrelationen mit der Vegetationsbedeckung, was auf eine besondere Wichtigkeit dieser Ökosystemdienstleistung in ausdauernden Kulturen hindeutet. Die Präferenz von bestimmten Samenarten deutet darauf hin, dass Samenprädation ein weiterer Grund für die beobachteten Änderungen der Unkrautgemeinschaften sein kann
Automatic Analysis of Composite Physical Signals Using Non-Negative Factorization and Information Criterion
In time-resolved spectroscopy, composite signal sequences representing energy transfer in fluorescence materials are measured, and the physical characteristics of the materials are analyzed. Each signal sequence is represented by a sum of non-negative signal components, which are expressed by model functions. For analyzing the physical characteristics of a measured signal sequence, the parameters of the model functions are estimated. Furthermore, in order to quantitatively analyze real measurement data and to reduce the risk of improper decisions, it is necessary to obtain the statistical characteristics from several sequences rather than just a single sequence. In the present paper, we propose an automatic method by which to analyze composite signals using non-negative factorization and an information criterion. The proposed method decomposes the composite signal sequences using non-negative factorization subjected to parametric base functions. The number of components (i.e., rank) is also estimated using Akaike's information criterion. Experiments using simulated and real data reveal that the proposed method automatically estimates the acceptable ranks and parameters
Impact of Fullerene Intercalation on Structural and Thermal Properties of Organic Photovoltaic Blends
The performance of organic photovoltaic blend devices is critically dependent on the polymer:fullerene interface. These interfaces are expected to impact the structural and thermal properties of the polymer with regards to the conjugated backbone planarity and transition temperatures during annealing/cooling processes. Here, we report the impact of fullerene intercalation on structural and thermal properties of poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene (PBTTT), a highly stable material known to exhibit liquid crystalline behavior. We undertake a detailed systematic study of the extent of intercalation in the PBTTT:fullerene blend, considering the use of four different fullerene derivatives and also varying the loading ratios. Resonant Raman spectroscopy allows direct observation of the interface morphology in situ during controlled heating and cooling. We find that small fullerene molecules readily intercalate into PBTTT crystallites, resulting in a planarization of the polymer backbone, but high fullerene loading ratios or larger fullerenes result in nonintercalated domains. During cooling from melt, nonintercalated blend films are found to return to their original morphology and reproduce all thermal transitions on cooling with minimal hysteresis. Intercalated blend films show significant hysteresis on cooling due to the crystallized fullerene attempting to reintercalate. The strongest hysteresis is for intercalated blend films with excess fullerene loading ratio, which form a distinct nanoribbon morphology and exhibit a reduced geminate recombination rate. These results reveal that careful consideration should be taken during device fabrication, as postdeposition thermal treatments significantly impact the charge generation and recombination dynamics
A Thieno[3,2-b][1]benzothiophene Isoindigo Building Block for Additive- and Annealing-Free High-Performance Polymer Solar Cells
An Energy-Gap Law for Photocurrent Generation in Fullerene-based Organic Solar Cells–The Case of Low-Donor Content-Blends
The involvement of charge-transfer (CT) states in the photogeneration and recombination of charge carriers has been an important focus of study within the organic photovoltaic community. In this work, we investigate the molecular factors determining the mechanism of photocurrent generation in low-donor-content organic solar cells, where the active layer is composed of vacuum-deposited C60 and small amounts of organic donor molecules. We find a pronounced decline of all photovoltaic parameters with decreasing CT state energy. Using a combination of steady-state photocurrent measurements and time-delayed collection field experiments, we demonstrate that the power conversion efficiency, and more specifically, the fill factor of these devices, is mainly determined by the bias dependence of photocurrent generation. By combining these findings with the results from ultrafast transient absorption spectroscopy, we show that blends with small CT energies perform poorly because of an increased nonradiative CT state decay rate and that this decay obeys an energy-gap law. Our work challenges the common view that a large energy offset at the heterojunction and/or the presence of fullerene clusters guarantee efficient CT dissociation and rather indicates that charge generation benefits from high CT state energies through a slower decay to the ground state
Alkyl Branching Position in Diketopyrrolopyrrole Polymers Interplay between Fibrillar Morphology and Crystallinity and Their Effect on Photogeneration and Recombination in Bulk Heterojunction Solar Cells
Diketopyrrolopyrrole
(DPP)-based donor–acceptor copolymers
have gained a significant amount of research interest in the organic
electronics community because of their high charge carrier mobilities
in organic field-effect transistors (OFETs) and their ability to harvest
near-infrared (NIR) photons in solar cells. In this study, we have
synthesized four DPP-based donor–acceptor copolymers with variations
in the donor unit and the branching point of the solubilizing alkyl
chains (at the second or sixth carbon position). Grazing incidence
wide-angle X-ray scattering (GIWAXS) results suggest that moving the
branching point further away from the polymer backbone increases the
tendency for aggregation and yields polymer phases with a higher degree
of crystallinity (DoC). The polymers were blended with PC70BM and used as active layers in solar cells. A careful analysis of
the energetics of the neat polymer and blend films reveals that the
charge-transfer state energy (ECT) of
the blend films lies exceptionally close to the singlet energy of
the donor (ED*), indicating near zero
electron transfer losses. The difference between the optical gap and
open-circuit voltage (VOC) is therefore
determined to be due to rather high nonradiative (≈ 418 ±
13 mV) and unavoidable radiative voltage losses (≈ 255 ±
8 mV). Even though the four materials have similar optical gaps, the
short-circuit current density (JSC) covers
a vast span from 7 to 18 mA cm–2 for the best performing
system. Using photoluminescence (PL) quenching and transient charge
extraction techniques, we quantify geminate and nongeminate losses
and find that fewer excitons reach the donor–acceptor interface
in polymers with further away branching points due to larger aggregate
sizes. In these material systems, the photogeneration is therefore
mainly limited by exciton harvesting efficiency
Isostructural, Deeper Highest Occupied Molecular Orbital Analogues of Poly(3-hexylthiophene) for High-Open Circuit Voltage Organic Solar Cells
We present the synthesis and characterization
of two novel thiazole-containing
conjugated polymers (<b>PTTTz</b> and <b>PTTz</b>) that
are isostructural to polyÂ(3-hexylthiophene) (P3HT). The novel materials
demonstrate optical and morphological properties almost identical
to those of P3HT but with HOMO and LUMO levels that are up to 0.45
eV deeper. An intramolecular planarizing nitrogen–sulfur nonbonding
interaction is observed, and its magnitude and origin are discussed.
Both materials demonstrate significantly greater open circuit voltages
than P3HT in bulk heterojunction solar cells. <b>PTTTz</b> is
shown to be an extremely versatile donor polymer that can be used
with a wide variety of fullerene acceptors with device efficiencies
of up to 4.5%. It is anticipated that this material could be used
as a high-open circuit voltage alternative to P3HT in organic solar
cells