Phase separation and pairing regimes in the one-dimensional asymmetric Hubbard model

We address some open questions regarding the phase diagram of the one-dimensional Hubbard model with asymmetric hopping coefficients and balanced species. In the attractive regime we present a numerical study of the passage from on-site pairing dominant correlations at small asymmetries to charge-density waves in the region with markedly different hopping coefficients. In the repulsive regime we exploit two analytical treatments in the strong- and weak-coupling regimes in order to locate the onset of phase separation at small and large asymmetries respectively.Comment: 13 pages, RevTeX 4, 12 eps figures, some additional refs. with respect to v1 and citation errors fixe

Effect of mobile carrier on the performance of pvam–nanocellulose facilitated transport membranes for co2 capture

Facilitated transport membranes obtained by coupling polyvinylamine with highly charged carboxymethylated nanocellulose fibers were studied considering both water sorption and gas permeation experiments. In particular, the effect of the L-arginine as a mobile carrier was investigated to understand possible improvements in CO2 transport across the membranes. The results show that L-arginine addition decreases the water uptake of the membrane, due to the lower polyvinylamine content, but was able to improve the CO2 transport. Tests carried on at 35◦ C and high relative humidity indeed showed an increase of both CO2 permeability and selectivity with respect to nitrogen and methane. In particular, the CO2 permeability increased from 160 to about 340 Barrer when arginine loading was increased from 0 to 45 wt%. In the same conditions, selectivity with respect to nitrogen was more than doubled, increasing from 20 to 45. Minor improvements were instead obtained with respect to methane; CO2 /CH4 selectivity, indeed, even in presence of the mobile carrier, was limited to about 20

Dry turning of alumina/aluminum composites with CVD diamond coated Co-cemented tungsten carbide tools

Triangular (TPGN 160308) WC-6 wt.%Co inserts having different average grain sizes (1 and 3 µm) were submitted to surface roughening either by wet etching with Murakami's reagent or by a heat treatment in the hot filament chemical vapour deposition (HFCVD) reactor. The heat treatment was performed in a monohydrogen-rich atmosphere at substrate temperatures as high as 1000 degrees C. Scanning electron microscopy and energy-dispersive spectroscopy showed that this pre-treatment led to surface roughening of the as-ground inserts and to a lower surface Co concentration. Prior to deposition, all inserts were etched with an acid solution of hydrogen peroxide. Diamond coatings were deposited by HFCVD. The coated inserts were tested by dry machining of aluminum-matrix composite (Al-10%Al2O3) bars. Turning test results indicated that a proper combination of substrate pretreatment and microstructure can significantly improve tool life