Mechanochemically synthesised ZnxCd1-xS nanoparticles for solar energy applications

The mechanochemical solid-state synthesis of ZnxCd1-xS nanoparticles from zinc acetate, cadmium acetate and sodium sulphide in a planetary laboratory mill is described. Through changing the molar ratio of the Zn and Cd precursors, ZnxCd1-xS nanoparticles of different composition were prepared. Structural, surface and morphological properties were investigated by XRD, XPS, SEM and UV-VIS. Diffusion structural diagnostics was characterised by the emanation thermal analysis (ETA) results measured on heating of the samples. The cubic phase was found to be stable under mechanochemical treatment, as determined by XRD. The mixed phases were found to have ideal solution behaviours. In addition, microstructural characterisation indicated that mechanochemical treatment resulted in a structural refinement with a surface weighted crystallite size about 2 nm. The additional information of microstructure development and transport properties of the samples on heating was obtained by ETA. The calculated lattice parameters of mixed crystals linearly depend on the composition of ZnxCd1-xS nanoparticles. The S(2p), Zn(2p) and Cd(3d) core levels of the ZnxCd1-xS nanocrystallites reveal two different types of sulphur, zinc and cadmium unlike bulk CdS and ZnS. The calculated results indicate that the quantum-size effect in the nanoparticles is not negligible. The differences in the absorption edge and the emission peak position of the nanoparticles depend not only composition. Applied high-energy milling is a facile, efficient, and scalable process that does not require a solvent and can be performed under ambient conditions. Therefore, it is a promising candidate for the production of nanocrystalline materials

Optical and Optoelectrical Properties of Ternary Chalcogenide CuInS₂/TiO₂ Nanocomposite Prepared by Mechanochemical Synthesis

In this work, a nanocomposite consisting of ternary chalcogenide CuInS2 and TiO2 was prepared and its optical and optoelectrical properties were investigated. The CuInS2/TiO2 nanocomposite was produced via one-step mechanochemical synthesis and characterized from the crystal structure, microstructural, morphology, surface, optical, and optoelectrical properties viewpoints. X-ray diffraction confirmed the presence of both components, CuInS2 and TiO2, in the nanocomposite and revealed a partial transformation of anatase to rutile. The presence of both components in the samples was also proven by Raman spectroscopy. HRTEM confirmed the nanocrystalline character of the samples as crystallites ranging from around 10 nm and up to a few tens of nanometers were found. The presence of the agglomerated nanoparticles into larger grains was proven by SEM. The measured optical properties of CuInS2, TiO2, and CuInS2/TiO2 nanocomposites demonstrate optical bandgaps of ~1.62 eV for CuInS2 and 3.26 eV for TiO2. The measurement of the optoelectrical properties showed that the presence of TiO2 in the CuInS2/TiO2 nanocomposite increased its conductivity and modified the photosensitivity depending on the ratio of the components. This study has demonstrated the possibility of preparing a CuInS2/TiO2 nanocomposite material with promising applications in optoelectronics in the visible region in an eco-friendly manner

Properties of CuFeS₂/TiO₂ Nanocomposite Prepared by Mechanochemical Synthesis

CuFeS2/TiO2 nanocomposite has been prepared by a simple, low-cost mechanochemical route to assess its visible-light-driven photocatalytic efficiency in Methyl Orange azo dye decolorization. The structural and microstructural characterization was studied using X-ray diffraction and high-resolution transmission electron microscopy. The presence of both components in the composite and a partial anatase-to-rutile phase transformation was proven by X-ray diffraction. Both components exhibit crystallite size below 10 nm. The crystallite size of both phases in the range of 10–20 nm was found and confirmed by TEM. Surface and morphological properties were characterized by scanning electron microscopy and nitrogen adsorption measurement. Scanning electron microscopy has shown that the nanoparticles are agglomerated into larger grains. The specific surface area of the nanocomposite was determined to be 21.2 m2·g−1. Optical properties using UV-Vis and photoluminescence spectroscopy were also investigated. CuFeS2/TiO2 nanocomposite exhibits strong absorption with the determined optical band gap 2.75 eV. Electron paramagnetic resonance analysis has found two types of paramagnetic ions in the nanocomposite. Mössbauer spectra showed the existence of antiferromagnetic and paramagnetic spin structure in the nanocomposite. The CuFeS2/TiO2 nanocomposite showed the highest discoloration activity with a MO conversion of ~ 74% after 120 min irradiation. This study has shown the possibility to prepare nanocomposite material with enhanced photocatalytic activity of decoloration of MO in the visible range by an environmentally friendly manne

Zvýšená termoelektrická účinnost chalkopyritového nanokompozitu pomocí společného mletí syntetických a přírodních minerálů

Chalcopyrite CuFeS2 was shown to be a promising thermoelectric material. Considering thermoelectric efficiency, its relatively high and temperature weakly dependent power factor, economic affordability and ecological benignity is counterbalanced by a high lattice thermal conductivity. Thus it is highly desirable to lower the thermal conductivity of chalcopyrite thermoelectric material without deterioration of other thermoelectric characteristics. In our study, we demonstrate that mechanosynthesis followed by appropriate sintering enables to prepare such nanostructured ceramics with a favourable thermoelectric response. Our study shows that mechanosynthesis is a low-cost technological route for the production of thermoelectric chalcopyrite ceramics.Chalkopyrit CuFeS2 se ukázal jako slibný termoelektrický materiál. Vzhledem k termoelektrické účinnosti je její relativně vysoký a teplotně slabě závislý účiník, ekonomická dostupnost a ekologická neškodnost vyvážena vysokou tepelnou vodivostí mřížky. Proto je velmi žádoucí snížit tepelnou vodivost termoelektrického materiálu chalkopyritu bez zhoršení dalších termoelektrických vlastností. V naší studii dokazujeme, že mechanosyntéza následovaná vhodným slinováním umožňuje připravit takovou nanostrukturovanou keramiku s příznivou termoelektrickou odezvou. Naše studie ukazuje, že mechanosyntéza je levnou technologickou cestou pro výrobu termoelektrické keramiky z chalkopyritu

Realgar nanoparticles versus ATO arsenic compounds induce in vitro and in vivo activity against multiple myeloma

Multiple myeloma (MM), a B cell malignancy characterized by clonal proliferation of plasma cells in the bone marrow, remains incurable despite the use of novel and conventional therapies. In this study, we demonstrated MM cell cytotoxicity triggered by realgar (REA; As4S4) nanoparticles (NREA) versus Arsenic trioxide (ATO) against MM cell lines and patient cells. Both NREA and ATO showed in vivo anti-MM activity, resulting in significantly decreased tumour burden. The anti-MM activity of NREA and ATO is associated with apoptosis, evidenced by DNA fragmentation, depletion of mitochondrial membrane potential, cleavage of caspases and anti-apoptotic proteins. NREA induced G2/M cell cycle arrest and modulation of cyclin B1, p53 (TP53), p21 (CDKN1A), Puma (BBC3) and Wee-1 (WEE1). Moreover, NREA induced modulation of key regulatory molecules in MM pathogenesis including JNK activation, c-Myc (MYC), BRD4, and histones. Importantly, NREA, but not ATO, significantly depleted the proportion and clonogenicity of the MM stem-like side population, even in the context of the bone marrow stromal cells. Finally, our study showed that both NREA and ATO triggered synergistic anti-MM activity when combined with lenalidomide or melphalan. Taken together, the anti-MM activity of NREA was more potent compared to ATO, providing the preclinical framework for clinical trials to improve patient outcome in MM

Hallmarks of mechanochemistry: from nanoparticles to technology

Équipe 401 : Nanomatériaux pour la vie et développement durableInternational audienceThe aim of this review article on recent developments of mechanochemistry (nowadays established as a part of chemistry) is to provide a comprehensive overview of advances achieved in the field of atomistic processes, phase transformations, simple and multicomponent nanosystems and peculiarities of mechanochemical reactions. Industrial aspects with successful penetration into fields like materials engineering, heterogeneous catalysis and extractive metallurgy are also reviewed. The hallmarks of mechanochemistry include influencing reactivity of solids by the presence of solid-state defects, interphases and relaxation phenomena, enabling processes to take place under non-equilibrium conditions, creating a well-crystallized core of nanoparticles with disordered near-surface shell regions and performing simple dry time-convenient one-step syntheses. Underlying these hallmarks are technological consequences like preparing new nanomaterials with the desired properties or producing these materials in a reproducible way with high yield and under simple and easy operating conditions. The last but not least hallmark is enabling work under environmentally friendly and essentially waste-free conditions (822 references)

Mechanochemistry of Chitosan-Coated Zinc Sulfide (ZnS) Nanocrystals for Bio-imaging Applications

Abstract The ZnS nanocrystals were prepared in chitosan solution (0.1 wt.%) using a wet ultra-fine milling. The obtained suspension was stable and reached high value of zeta potential (+57 mV). The changes in FTIR spectrum confirmed the successful surface coating of ZnS nanoparticles by chitosan. The prepared ZnS nanocrystals possessed interesting optical properties verified in vitro. Four cancer cells were selected (CaCo-2, HCT116, HeLa, and MCF-7), and after their treatment with the nanosuspension, the distribution of ZnS in the cells was studied using a fluorescence microscope. The particles were clearly seen; they passed through the cell membrane and accumulated in cytosol. The biological activity of the cells was not influenced by nanoparticles, they did not cause cell death, and only the granularity of cells was increased as a consequence of cellular uptake. These results confirm the potential of ZnS nanocrystals using in bio-imaging applications