The fluorescent tube-lamp integrating chamber.

Thesis (M.Sc.)-University of KwaZulu-Natal, Westville, 2008.The objective of this project is to design a facility that will characterize the electrical and optical properties of both tubular and the more recent compact fluorescent tubes. The first stage of this project, which is the subject of this dissertation, was to design, build, test, and model a cylindrical light integrating chamber. An integrating chamber capable of measuring 2-metre long fluorescent tubes was built at the University of KwaZulu-Natal, South Africa. To approximate an infinitely long tube, precisely mounted planar mirrors were placed at opposite ends of the cylinder. The reflectance of diffusive reflective paint and mirrors enter into calculations and were investigated experimentally using a Jarrel-Ash optical spectrometer. The light flux was finally measured for various chamber lengths and compared with a mathematical model. Total light power output from the lamp was calculated and compared with the electrical power input, and the lamp efficiency deduced. Accurate calculations required that the light field surrounding a cylindrical diffuse source be modeled mathematically. The reflection coefficients of the mirrors were not unity and the equations had to be modified to include this effect. The mathematical model was solved using a combination of analytical and numerical techniques. The model results were compared with measurements. The final result includes a mathematical description of the integrating chamber, and a flux-density plot of the space surrounding the fluorescent tube

Broadband Records of Earthquakes in Deep Gold Mines and a Comparison with Results from SAFOD, California

For one week during September 2007, we deployed a temporary network of field recorders and accelerometers at four sites within two deep, seismically active mines. The ground-motion data, recorded at 200 samples/sec, are well suited to determining source and ground-motion parameters for the mining-induced earthquakes within and adjacent to our network. Four earthquakes with magnitudes close to 2 were recorded with high signal/noise at all four sites. Analysis of seismic moments and peak velocities, in conjunction with the results of laboratory stick-slip friction experiments, were used to estimate source processes that are key to understanding source physics and to assessing underground seismic hazard. The maximum displacements on the rupture surfaces can be estimated from the parameter Rv, where v is the peak ground velocity at a given recording site, and R is the hypocentral distance. For each earthquake, the maximum slip and seismic moment can be combined with results from laboratory friction experiments to estimate the maximum slip rate within the rupture zone. Analysis of the four M 2 earthquakes recorded during our deployment and one of special interest recorded by the in-mine seismic network in 2004 revealed maximum slips ranging from 4 to 27 mm and maximum slip rates from 1.1 to 6:3 m=sec. Applying the same analyses to an M 2.1 earthquake within a cluster of repeating earthquakes near the San Andreas Fault Observatory at Depth site, California, yielded similar results for maximum slip and slip rate, 14 mm and 4:0 m=sec

Seismic methods in mineral exploration and mine planning: A general overview of past and present case histories and a look into the future.

Due to high metal prices and increased difficulties in finding shallower deposits, the exploration for and exploitation of mineral resources is expected to move to greater depths. Consequently, seismic methods will become a more important tool to help unravel structures hosting mineral deposits at great depth for mine planning and exploration. These methods also can be used with varying degrees of success to directly target mineral deposits at depth. We review important contributions that have been made in developing these techniques for the mining industry with focus on four main regions: Australia, Europe, Canada, and South Africa. A wide range of case studies are covered, including some that are published in the special issue accompanying this article, from surface to borehole seismic methods, as well as petrophysical data and seismic modeling of mineral deposits. At present, high-resolution 2D surveys mostly are performed in mining areas, but there is a general increasing trend in the use of 3D seismic methods, especially in mature mining camps

Imported Case of Poliomyelitis, Melbourne, Australia, 2007

Wild poliovirus–associated paralytic poliomyelitis has not been reported in Australia since 1977. We report type 1 wild poliovirus infection in a man who had traveled from Pakistan to Australia in 2007. Poliomyelitis should be considered for patients with acute flaccid paralysis or unexplained fever who have been to poliomyelitis-endemic countries

A retrospective analysis of the change in anti-malarial treatment policy: Peru

<p>Abstract</p> <p>Background</p> <p>National malaria control programmes must deal with the complex process of changing national malaria treatment guidelines, often without guidance on the process of change. Selecting a replacement drug is only one issue in this process. There is a paucity of literature describing successful malaria treatment policy changes to help guide control programs through this process.</p> <p>Objectives</p> <p>To understand the wider context in which national malaria treatment guidelines were formulated in a specific country (Peru).</p> <p>Methods</p> <p>Using qualitative methods (individual and focus group interviews, stakeholder analysis and a review of documents), a retrospective analysis of the process of change in Peru's anti-malarial treatment policy from the early 1990's to 2003 was completed.</p> <p>Results</p> <p>The decision to change Peru's policies resulted from increasing levels of anti-malarial drug resistance, as well as complaints from providers that the drugs were no longer working. The context of the change occurred in a time in which Peru was changing national governments, which created extreme challenges in moving the change process forward. Peru utilized a number of key strategies successfully to ensure that policy change would occur. This included a) having the process directed by a group who shared a common interest in malaria and who had long-established social and professional networks among themselves, b) engaging in collaborative teamwork among nationals and between nationals and international collaborators, c) respect for and inclusion of district-level staff in all phases of the process, d) reliance on high levels of technical and scientific knowledge, e) use of standardized protocols to collect data, and f) transparency.</p> <p>Conclusion</p> <p>Although not perfectly or fully implemented by 2003, the change in malaria treatment policy in Peru occurred very quickly, as compared to other countries. They identified a problem, collected the data necessary to justify the change, utilized political will to their favor, approved the policy, and moved to improve malaria control in their country. As such, they offer an excellent example for other countries as they contemplate or embark on policy changes.</p

Public Health Response to Imported Case of Poliomyelitis, Australia, 2007

Inactivated polio vaccine was offered, and the index case-patient and household contacts were quarantined

A structured framework for improving outbreak investigation audits

Outbreak investigation is a core function of public health agencies. Suboptimal outbreak investigation endangers both public health and agency reputations. While audits of clinical medical and nursing practice are conducted as part of continuous quality improvement, public health agencies rarely make systematic use of structured audits to ensure best practice for outbreak responses, and there is limited guidance or policy to guide outbreak audit. A framework for prioritising which outbreak investigations to audit, an approach for conducting a successful audit, and a template for audit trigger questions was developed and trialled in four foodborne outbreaks and a respiratory disease outbreak in Australia. The following issues were identified across several structured audits: the need for clear definitions of roles and responsibilities both within and between agencies, improved communication between agencies and with external stakeholders involved in outbreaks, and the need for development of performance standards in outbreak investigations - particularly in relation to timeliness of response. Participants considered the audit process and methodology to be clear, useful, and non-threatening. Most audits can be conducted within two to three hours, however, some participants felt this limited the scope of the audit. The framework was acceptable to participants, provided an opportunity for clarifying perceptions and enhancing partnership approaches, and provided useful recommendations for approaching future outbreaks. Future challenges include incorporating feedback from broader stakeholder groups, for example those of affected cases, institutions and businesses; assessing the quality of a specific audit; developing training for both participants and facilitators; and building a central capacity to support jurisdictions embarking on an audit. The incorporation of measurable performance criteria or sharing of benchmark performance criteria will assist in the standardisation of outbreak investigation audit and further quality improvement

Using the SaTScan method to detect local malaria clusters for guiding malaria control programmes

Mpumalanga Province, South Africa is a low malaria transmission area that is subject to malaria epidemics. SaTScan methodology was used by the malaria control programme to detect local malaria clusters to assist disease control planning. The third season for case cluster identification overlapped with the first season of implementing an outbreak identification and response system in the area. SaTScan™ software using the Kulldorf method of retrospective space-time permutation and the Bernoulli purely spatial model was used to identify malaria clusters using definitively confirmed individual cases in seven towns over three malaria seasons. Following passive case reporting at health facilities during the 2002 to 2005 seasons, active case detection was carried out in the communities, this assisted with determining the probable source of infection. The distribution and statistical significance of the clusters were explored by means of Monte Carlo replication of data sets under the null hypothesis with replications greater than 999 to ensure adequate power for defining clusters. SaTScan detected five space-clusters and two space-time clusters during the study period. There was strong concordance between recognized local clustering of cases and outbreak declaration in specific towns. Both Albertsnek and Thambokulu reported malaria outbreaks in the same season as space-time clusters. This synergy may allow mutual validation of the two systems in confirming outbreaks demanding additional resources and cluster identification at local level to better target resources. Exploring the clustering of cases assisted with the planning of public health activities, including mobilizing health workers and resources. Where appropriate additional indoor residual spraying, focal larviciding and health promotion activities, were all also carried out