Energy-Efficient Signalling in QoS Constrained Heterogeneous Networks

© 2013 IEEE. This paper considers a heterogeneous network, which consists of one macro base station and numerous small cell base stations (SBSs) cooperatively serving multiple user terminals. The first objective is to design cooperative transmit beamformers at the base stations to maximize the network energy efficiency (EE) in terms of bits per joule subject to the users' quality of service (QoS) constraints, which poses a computationally difficult optimization problem. The commonly used Dinkelbach-type algorithms for optimizing a ratio of concave and convex functions are not applicable. This paper develops a path-following algorithm to address the computational solution to this problem, which invokes only a simple convex quadratic program of moderate dimension at each iteration and quickly converges at least to a locally optimal solution. Furthermore, the problem of joint beamformer design and SBS service assignment in the three-objective (EE, QoS, and service loading) optimization is also addressed. Numerical results demonstrate the performance advantage of the proposed solutions

Optimal Video Streaming in Dense 5G Networks With D2D Communications

© 2017 IEEE. Mobile video traffic and mobile devices have now outpaced other data traffic and fixed devices. Global service providers are attempting to propose new mobile infrastructures and solutions for high performance of video streaming services, i.e., high quality of experience (QoE) at high resource efficiency. Although device-to-device (D2D) communications have been an emerging technique that is anticipated to provide a massive number of mobile users with advanced services in 5G networks, the management of resource and co-channel interference between D2D pairs, i.e., helper-requester pairs, and cellular users (CUs) is challenging. In this paper, we design an optimal rate allocation and description distribution for high performance video streaming, particularly, achieving high QoE at high energy efficiency while limiting co-channel interference over D2D communications in 5G networks. To this end, we allocate optimal encoding rates to different layers of a video segment and then packetize the video segment into multiple descriptions with embedded forward error correction before transmission. Simultaneously, the optimal numbers of descriptions are distributed to D2D helpers and base stations in a cooperative scheme for transmitting to the D2D requesters. The optimal results are efficiently in correspondence with intra-popularity of different segments of a video characterized by requesters' behavior, characteristic of lossy wireless channels, channel state information of D2D requesters, and constraints on remaining energy of D2D helpers and target signal to interference plus noise ratio of CUs. Simulation results demonstrate the benefits of our proposed solution in terms of high performance video streaming

Joint Power Allocation and Beamforming for Energy-Efficient Two-Way Multi-Relay Communications

© 2017 IEEE. This paper considers the joint design of user power allocation and relay beamforming in relaying communications, in which multiple pairs of single-antenna users exchange information with each other via multiple-antenna relays in two time slots. All users transmit their signals to the relays in the first time slot while the relays broadcast the beamformed signals to all users in the second time slot. The aim is to maximize the system's energy efficiency (EE) subject to quality-of-service (QoS) constraints in terms of exchange throughput requirements. The QoS constraints are nonconvex with many nonlinear cross-terms, so finding a feasible point is already computationally challenging. The sum throughput appears in the numerator while the total consumption power appears in the denominator of the EE objective function. The former is a nonconcave function and the latter is a nonconvex function, making fractional programming useless for EE optimization. Nevertheless, efficient iterations of low complexity to obtain its optimized solutions are developed. The performance of the multiple-user and multiple-relay networks under various scenarios is evaluated to show the merit of the proposed method

Variance-Constrained Capacity of the Molecular Timing Channel with Synchronization Error

Accepted for GLOBECOM 201

Outdated Access Point Selection for Mobile Edge Computing with Cochannel Interference

In this paper, we investigate a mobile edge computing (MEC) network, where the user has some computational tasks to be assisted by multiple computational access points (CAPs) through offloading. We consider practical communication scenarios with limited spectrum resources, and the cochannel arising from the aggressive reuse of frequency severely degrades the system offloading performance. To enhance the system performance, we provide three CAP selection criteria to choose one best CAP among multiple ones. Specifically, criterion I maximizes the computational capability at the CAP, criterion II minimizes the interfering power, while criterion III maximizes the instantaneous channel gain of data link. In time-varying channel environments, the CAP selection may be outdated, which deteriorates the system performance. For the three criteria, we evaluate the system outage probability in the outdated channel state information (CSI) by taking into account the latency, energy consumption and data rate, and provide the analytical and asymptotic expressions of outage probability, from which we obtain some critical insights on the system design. Simulation results are finally demonstrated to verify the proposed studies. In particular, criterion III under the perfect CSI can achieve the system whole diversity order coming from multiple CAPs

Secure D2D Communication in Large-Scale Cognitive Cellular Networks: A Wireless Power Transfer Model

In this paper, we investigate secure device-to-device (D2D) communication in energy harvesting large-scale cognitive cellular networks. The energy constrained D2D transmitter harvests energy from multi-antenna equipped power beacons (PBs), and communicates with the corresponding receiver using the spectrum of the primary base stations (BSs). We introduce a power transfer model and an information signal model to enable wireless energy harvesting and secure information transmission. In the power transfer model, three wireless power transfer (WPT) policies are proposed: 1) cooperative power beacons (CPB) power transfer, 2) best power beacon (BPB) power transfer, and 3) nearest power beacon (NPB) power transfer. To characterize the power transfer reliability of the proposed three policies, we derive new expressions for the exact power outage probability. Moreover, the analysis of the power outage probability is extended to the case when PBs are equipped with large antenna arrays. In the information signal model, we present a new comparative framework with two receiver selection schemes: 1) best receiver selection (BRS), where the receiver with the strongest channel is selected, and 2) nearest receiver selection (NRS), where the nearest receiver is selected. To assess the secrecy performance, we derive new analytical expressions for the secrecy outage probability and the secrecy throughput considering the two receiver selection schemes using the proposed WPT policies. We presented Monte-carlo simulation results to corroborate our analysis and show: 1) secrecy performance improves with increasing densities of PBs and D2D receivers due to larger multiuser diversity gain, 2) CPB achieves better secrecy performance than BPB and NPB but consumes more power, and 3) BRS achieves better secrecy performance than NRS but demands more instantaneous feedback and overhead. A pivotal conclusion is reached that with increasing number of antennas at PBs, NPB offers a comparable secrecy- performance to that of BPB but with a lower complexity

Secure D2D Communication in Large-Scale Cognitive Cellular Networks with Wireless Power Transfer

In this paper, we investigate secure device-to-device (D2D) communication in energy harvesting large-scale cognitive cellular networks. The energy constrained D2D transmitter harvests energy from multi-antenna equipped power beacons (PBs), and communicates with the corresponding receiver using the spectrum of the cellular base stations (BSs). We introduce a power transfer model and an information signal model to enable wireless energy harvesting and secure information transmission. In the power transfer model, we propose a new power transfer policy, namely, best power beacon (BPB) power transfer. To characterize the power transfer reliability of the proposed policy, we derive new closed-form expressions for the exact power outage probability and the asymptotic power outage probability with large antenna arrays at PBs. In the information signal model, we present a new comparative framework with two receiver selection schemes: 1) best receiver selection (BRS), and 2) nearest receiver selection (NRS). To assess the secrecy performance, we derive new expressions for the secrecy throughput considering the two receiver selection schemes using the BPB power transfer policies. We show that secrecy performance improves with increasing densities of PBs and D2D receivers because of a larger multiuser diversity gain. A pivotal conclusion is reached that BRS achieves better secrecy performance than NRS but demands more instantaneous feedback and overhead

PMU Placement Optimization for Efficient State Estimation in Smart Grid

© 1983-2012 IEEE. This paper investigates phasor measurement unit (PMU) placement for informative state estimation in smart grid by incorporating various constraints for observability. Observability constitutes an important property for PMU placement to characterize the depth of the buses' reachability by the placed PMUs, but addressing it solely by binary linear programming as in many works still does not guarantee a good estimate for the grid state. Some existing works have considered optimization of some estimation indices by ignoring the observability requirements for computational ease and thus potentially lead to trivial results such as acceptance of the estimate for an unobserved state component as its unconditional mean. In this work, the PMU placement optimization problem is considered by minimizing the mean squared error or maximizing the mutual information between the measurement output and grid state subject to observability constraints, which incorporate operating conditions such as presence of zero injection buses, contingency of measurement loss, and limitation of communication channels per PMU. The proposed design is thus free from the fundamental shortcomings in the existing PMU placement designs. The problems are posed as large scale binary nonlinear optimization problems involving thousands of binary variables, for which this paper develops efficient algorithms for computational solutions. Their performance is analyzed in detail through numerical examples on large scale IEEE power networks. The solution method is also shown to be extendable to AC power flow models, which are formulated by nonlinear equations

Beamforming Design for Wireless Information and Power Transfer Systems: Receive Power-Splitting Versus Transmit Time-Switching

© 1972-2012 IEEE. Information and energy can be transferred over the same radio-frequency channel. In the power-splitting (PS) mode, they are simultaneously transmitted using the same signal by the base station (BS) and later separated at the user (UE)'s receiver by a power splitter. In the time-switching (TS) mode, they are either transmitted separately in time by the BS or received separately in time by the UE. In this paper, the BS transmit beamformers are jointly designed with either the receive PS ratios or the transmit TS ratios in a multicell network that implements wireless information and power transfer (WIPT). Imposing UE-harvested energy constraints, the design objectives include: 1) maximizing the minimum UE rate under the BS transmit power constraint, and 2) minimizing the maximum BS transmit power under the UE data rate constraint. New iterative algorithms of low computational complexity are proposed to efficiently solve the formulated difficult nonconvex optimization problems, where each iteration either solves one simple convex quadratic program or one simple second-order-cone-program. Simulation results show that these algorithms converge quickly after only a few iterations. Notably, the transmit TS-based WIPT system is not only more easily implemented but outperforms the receive PS-based WIPT system as it better exploits the beamforming design at the transmitter side