119 research outputs found

    Energy-Efficient Signalling in QoS Constrained Heterogeneous Networks

    Get PDF
    © 2013 IEEE. This paper considers a heterogeneous network, which consists of one macro base station and numerous small cell base stations (SBSs) cooperatively serving multiple user terminals. The first objective is to design cooperative transmit beamformers at the base stations to maximize the network energy efficiency (EE) in terms of bits per joule subject to the users' quality of service (QoS) constraints, which poses a computationally difficult optimization problem. The commonly used Dinkelbach-type algorithms for optimizing a ratio of concave and convex functions are not applicable. This paper develops a path-following algorithm to address the computational solution to this problem, which invokes only a simple convex quadratic program of moderate dimension at each iteration and quickly converges at least to a locally optimal solution. Furthermore, the problem of joint beamformer design and SBS service assignment in the three-objective (EE, QoS, and service loading) optimization is also addressed. Numerical results demonstrate the performance advantage of the proposed solutions

    Membrane distillation and membrane electrolysis of coal seam gas reverse osmosis brine for clean water extraction and NaOH production

    Get PDF
    Membrane distillation (MD) and membrane electrolysis (ME) were evaluated for simultaneous fresh water extraction and NaOH production from a mixture of NaCl and NaHCO3 to simulate the composition of coal seam gas (CSG) reverse osmosis (RO) brine. Experimental results demonstrate the potential of MD for producing fresh water and simultaneously concentrating CSG RO brine prior to the ME process. MD water flux was slightly reduced by the increased feed salinity and the decomposition of bicarbonate to CO2 during the concentration of CSG RO brine. MD operation of CSG RO brine at a concentration factor of 10 (90% water recovery) was achieved with distillate conductivity as low as 18 μS/cm, and without any observable membrane scaling. Exceeding the concentration factor of 10 could lead to deterioration in both water flux and distillate quality due to the precipitation of NaCl, NaHCO3, and Na2CO3 on the membrane. With respect to ME, current density and water circulation rates exerted strong influences on the ME process performance. Combining ME with MD reduced the thermal energy requirement of ME by 3 MJ per kg of NaOH produced and the thermal energy consumption of MD by 22 MJ per m3 of clean water extracted

    Membrane scaling and prevention techniques during seawater desalination by air gap membrane distillation

    Get PDF
    Membrane scaling and mitigation techniques during air gap membrane distillation (AGMD) of seawater were investigated. The results showed a strong influence of AGMD operating temperature on not only the process water flux but also membrane scaling and subsequent cleaning efficiency. Elevating feed/coolant temperature from 35/25 to 60/50 °C increased water flux, but also exacerbated membrane scaling of the AGMD process. Membrane scaling was more severe, and occurred at a lower water recovery (68%) when operating at 60/50 °C compared to 35/25 °C (78%) due to increased concentration polarisation effect. Operating temperature also affected the efficiency of the subsequent membrane cleaning. Membrane scaling that occurred at low temperature (i.e. 35/25 °C) was more efficiently cleaned than at high temperature (i.e. 60/50 °C). In addition, membrane cleaning using vinegar was much more efficient than fresh water. Nevertheless, vinegar cleaning could not completely restore the membrane surface to the original condition. Traces of residual scalants on the membrane surface accelerated scaling in the next operation cycle. On the other hand, anti-scalant addition could effectively control scaling. Membrane scaling during AGMD of seawater at 70% water recovery and 60/50 °C was effectively controlled by anti-scalant addition

    A novel electrospun, hydrophobic, and elastomeric styrene-butadiene-styrene membrane for membrane distillation applications

    Full text link
    © 2017 In this study, a novel hydrophobic, microporous membrane was fabricated from styrene-butadiene-styrene (SBS) polymer using electrospinning and evaluated for membrane distillation applications. Compared to a commercially available polytetrafluoroethylene (PTFE) membrane, the SBS membrane had larger membrane pore size and fiber diameter and comparable membrane porosity. The fabricated SBS showed slightly lower water flux than the PTFE membrane because it was two times thicker. However, the SBS membrane had better salt rejection and most importantly could be fabricated via a simple process. The SBS membrane was also more hydrophobic than the reference PTFE membrane. In particular, as temperature of the reference water liquid increased to 60 °C, the SBS membrane remained hydrophobic with a contact angle of 100° whereas the PTFE became hydrophilic with a contact angle of less than 90°. The hydrophobic membrane surface prevented the intrusion of liquid into the membrane pores, thus improving the salt rejection of the SBS membrane. In addition, the SBS membrane had superior mechanical strength over the PTFE membrane. Using the SBS membrane, stable water flux was achieved throughout an extended MD operation period of 120 h to produce excellent quality distillate (over 99.7% salt rejection) from seawater

    Investigation of the cerebral hemodynamic response function in single blood vessels by functional photoacoustic microscopy

    Full text link
    The specificity of the hemodynamic response function (HRF) is determined spatially by the vascular architecture and temporally by the evolution of hemodynamic changes. Here, we used functional photoacoustic microscopy (fPAM) to investigate single cerebral blood vessels of rats after left forepaw stimulation. In this system, we analyzed the spatiotemporal evolution of the HRFs of the total hemoglobin concentration (HbT), cerebral blood volume (CBV), and hemoglobin oxygen saturation (SO2). Changes in specific cerebral vessels corresponding to various electrical stimulation intensities and durations were bilaterally imaged with 36 × 65-μm2 spatial resolution. Stimulation intensities of 1, 2, 6, and 10 mA were applied for periods of 5 or 15 s. Our results show that the relative functional changes in HbT, CBV, and SO2 are highly dependent not only on the intensity of the stimulation, but also on its duration. Additionally, the duration of the stimulation has a strong influence on the spatiotemporal characteristics of the HRF as shorter stimuli elicit responses only in the local vasculature (smaller arterioles), whereas longer stimuli lead to greater vascular supply and drainage. This study suggests that the current fPAM system is reliable for studying relative cerebral hemodynamic changes, as well as for offering new insights into the dynamics of functional cerebral hemodynamic changes in small animals. © 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)

    Evaluating energy consumption of air gap membrane distillation for seawater desalination at pilot scale level

    Full text link
    This study aimed to optimise an air gap membrane distillation (AGMD) system for seawater desalination with respect to distillate production as well as thermal and electrical energy consumption. Pilot evaluation data shows a notable influence of evaporator inlet temperature and water circulation rate on process performance. An increase in both distillate production rate and energy efficiency could be obtained by increasing the evaporator inlet temperature. On the other hand, there was a trade-off between the distillate production rate and energy efficiency when the water circulation rate varied. Increasing the water circulation rate resulted in an improvement in the distillate production rate, but also an increase in both specific thermal and electrical energy consumption. Given the small driving force used in the pilot AGMD, discernible impact of feed salinity on process performance could be observed, while the effects of temperature and concentration polarisation were small. At the optimum operating conditions identified in this study, a stable AGMD operation for seawater desalination could be achieved with specific thermal and electrical energy consumption of 90 and 0.13 kW h/m3, respectively. These values demonstrate the commercial viability of AGMD for small-scale and off-grid seawater desalination where solar thermal or low-grade heat sources are readily available

    A new perspective on small-scale treatment systems for arsenic affected groundwater

    Full text link
    This work provides a new perspective on small-scale treatment systems to remove arsenic from groundwater for potable applications in low-income communities. Data corroborated from the literature highlight a significant challenge to providing potable water in a financially sustainable manner in arsenic affected areas. Analysis of the literature also reveals notable deficiency in the current practice, especially the overfocus on household-scale treatment systems for arsenic affected groundwater without adequate maintenance, monitoring, and a systematic cost–benefit analysis. Accurate and reliable analysis of arsenic in water samples at relevant health guideline values is costly and technologically demanding for low-income communities. Significant discrepancy in the performance of household-scale treatment systems can be attributed to the lack of maintenance and systematic monitoring. Moreover, data on the maintenance and compliance monitoring cost of small-scale arsenic treatment systems are very limited in the literature, and the available data show an exponential increase in maintenance cost per treatment capacity unit as the treatment size decreases. On the other hand, significant opportunities exist to increase performance reliability and reduce water treatment cost by taking advantage of the current digital transformation of the water sector. The analysis in this work suggests the need to reframe current practice towards commune-scale treatment systems as an interim step before centralised water supply is available

    Composition change-driven texturing and doping in solution-processed SnSe thermoelectric thin films

    Get PDF
    The discovery of SnSe single crystals with record high thermoelectric efficiency along the b-axis has led to the search for ways to synthesize polycrystalline SnSe with similar efficiencies. However, due to weak texturing and difficulties in doping, such high thermoelectric efficiencies have not been realized in polycrystals or thin films. Here, we show that highly textured and hole doped SnSe thin films with thermoelectric power factors at the single crystal level can be prepared by solution process. Purification step in the synthetic process produced a SnSe-based chalcogenidometallate precursor, which decomposes to form the SnSe2 phase. We show that the strong textures of the thin films in the b???c plane originate from the transition of two dimensional SnSe2 to SnSe. This composition change-driven transition offers wide control over composition and doping of the thin films. Our optimum SnSe thin films exhibit a thermoelectric power factor of 4.27 ??W cm???1 K???2

    The banff 2019 kidney meeting report (I): updates on and clarification of criteria for T cell- and antibody-mediated rejection.

    Get PDF
    The XV. Banff conference for allograft pathology was held in conjunction with the annual meeting of the American Society for Histocompatibility and Immunogenetics in Pittsburgh, PA (USA) and focused on refining recent updates to the classification, advances from the Banff working groups, and standardization of molecular diagnostics. This report on kidney transplant pathology details clarifications and refinements to the criteria for chronic active (CA) T cell-mediated rejection (TCMR), borderline, and antibody-mediated rejection (ABMR). The main focus of kidney sessions was on how to address biopsies meeting criteria for CA TCMR plus borderline or acute TCMR. Recent studies on the clinical impact of borderline infiltrates were also presented to clarify whether the threshold for interstitial inflammation in diagnosis of borderline should be i0 or i1. Sessions on ABMR focused on biopsies showing microvascular inflammation in the absence of C4d staining or detectable donor-specific antibodies; the potential value of molecular diagnostics in such cases and recommendations for use of the latter in the setting of solid organ transplantation are presented in the accompanying meeting report. Finally, several speakers discussed the capabilities of artificial intelligence and the potential for use of machine learning algorithms in diagnosis and personalized therapeutics in solid organ transplantation
    corecore