Research data supporting Effect of thermal treatments on chiral nematic cellulose nanocrystal films

the dataset content is described in the associated pdf summary

Design and fabrication of recombinant reflectin-based multilayer reflectors: bio-design engineering and photoisomerism induced wavelength modulation

From Springer Nature via Jisc Publications RouterHistory: received 2020-10-03, accepted 2021-06-18, registration 2021-07-07, pub-electronic 2021-07-16, online 2021-07-16, collection 2021-12Publication status: PublishedFunder: Defence Science and Technology Laboratory; doi: http://dx.doi.org/10.13039/100010418Funder: Engineering and Physical Sciences Research Council; doi: http://dx.doi.org/10.13039/501100000266; Grant(s): EP/S01778X/1, EP/S01778X/1, EP/S01778X/1Abstract: The remarkable camouflage capabilities of cephalopods have inspired many to develop dynamic optical materials which exploit certain design principles and/or material properties from cephalopod dermal cells. Here, the angle-dependent optical properties of various single-layer reflectin thin-films on Si wafers are characterized within the UV–Vis–NIR regions. Following this, initial efforts to design, fabricate, and optically characterize a bio-inspired reflectin-based multilayer reflector is described, which was found to conserve the optical properties of single layer films but exhibit reduced angle-dependent visible reflectivity. Finally, we report the integration of phytochrome visible light-induced isomerism into reflectin-based films, which was found to subtly modulate reflectin thin-film reflectivity

Co-firing of biomass with coals Part 1. Thermogravimetric kinetic analysis of combustion of fir (abies bornmulleriana) wood

The chemical composition and reactivity of fir (Abies bornmulleriana) wood under non-isothermal thermogravimetric (TG) conditions were studied. Oxidation of the wood sample at temperatures near 600 A degrees C caused the loss of aliphatics from the structure of the wood and created a char heavily containing C-O functionalities and of highly aromatic character. On-line FTIR recordings of the combustion of wood indicated the oxidation of carbonaceous and hydrogen content of the wood and release of some hydrocarbons due to pyrolysis reactions that occurred during combustion of the wood. TG analysis was used to study combustion of fir wood. Non-isothermal TG data were used to evaluate the kinetics of the combustion of this carbonaceous material. The article reports application of Ozawa-Flynn-Wall model to deal with non-isothermal TG data for the evaluation of the activation energy corresponding to the combustion of the fir wood. The average activation energy related to fir wood combustion was 128.9 kJ/mol, and the average reaction order for the combustion of wood was calculated as 0.30

Effect of thermal treatments on chiral nematic cellulose nanocrystal films.

The ability to manipulate the optical appearance of materials is essential in virtually all products and areas of technology. Structurally coloured chiral nematic cellulose nanocrystal (CNC) films proved to be an excellent platform to design optical appearance, as their response can be moulded by organising them in hierarchical architectures. Here, we study how thermal treatments influence the optical appearance of structurally coloured CNC films. We demonstrate that the CNCs helicoidal architecture and the chiral optical response can be maintained up to 250 °C after base treatment and cross-linking with glutaraldehyde, while, alternatively, an exposure to vacuum allows for the helicoidal arrangement to be further preserved up to 900 °C, thus producing aromatic chiral carbon. The ability to retain the helicoidal arrangement, and thus the visual appearance, in CNC films up to 250 °C is highly desirable for high temperature colour-based industrial applications and for passive colorimetric heat sensors. Similarly, the production of chiral carbon provides a new type of conductive carbon for electrochemical applications.BBSRC [BB/K014617/1], EPSRC [1525292, EP/453 R511675/1, EP/K503757/1], European Research Council [ERC-2014-STG H2020 454 639088, ERC-PoC-2017 790518], BP-ICAM Kathleen Lonsdale Research Fellowshi

Effect of thermal treatments on chiral nematic cellulose nanocrystal films.

From PubMed via Jisc Publications RouterHistory: received 2021-04-10, revised 2021-06-21, accepted 2021-07-05Publication status: ppublishThe ability to manipulate the optical appearance of materials is essential in virtually all products and areas of technology. Structurally coloured chiral nematic cellulose nanocrystal (CNC) films proved to be an excellent platform to design optical appearance, as their response can be moulded by organising them in hierarchical architectures. Here, we study how thermal treatments influence the optical appearance of structurally coloured CNC films. We demonstrate that the CNCs helicoidal architecture and the chiral optical response can be maintained up to 250 °C after base treatment and cross-linking with glutaraldehyde, while, alternatively, an exposure to vacuum allows for the helicoidal arrangement to be further preserved up to 900 °C, thus producing aromatic chiral carbon. The ability to retain the helicoidal arrangement, and thus the visual appearance, in CNC films up to 250 °C is highly desirable for high temperature colour-based industrial applications and for passive colorimetric heat sensors. Similarly, the production of chiral carbon provides a new type of conductive carbon for electrochemical applications. [Abstract copyright: Copyright © 2021 Elsevier Ltd. All rights reserved.

Nanocrystalline Cellulose as a Versatile Engineering Material for Extrusion-Based Bioprinting

Naturally derived polysaccharide-based hydrogels, such as alginate, are frequently used in the design of bioinks for 3D bioprinting. Traditionally, the formulation of such bioinks requires the use of pre-reticulated materials with low viscosities, which favour cell viability but can negatively influence the resolution and shape fidelity of the printed constructs. In this work, we propose the use of cellulose nanocrystals (CNCs) as a rheological modifier to improve the printability of alginate-based bioinks whilst ensuring a high viability of encapsulated cells. Through rheological analysis, we demonstrate that the addition of CNCs (1% and 2% (w/v)) to alginate hydrogels (1% (w/v)) improves shear-thinning behaviour and mechanical stability, resulting in the high-fidelity printing of constructs with superior resolution. Importantly, LIVE/DEAD results confirm that the presence of CNCs does not seem to affect the health of immortalised chondrocytes (TC28a2) that remain viable over a period of seven days post-encapsulation. Taken together, our results indicate a favourable effect of the CNCs on the rheological and biocompatibility properties of alginate hydrogels, opening up new perspectives for the application of CNCs in the formulation of bioinks for extrusion-based bioprinting