Polydimethylsiloxane (PDMS)-based microfluidic channel with integrated commercial pressure sensors

The precise characterisation of boiling in microchannels is essential for the optimisation of applications requiring two phase cooling. In this paper polydimethylsiloxane (PDMS) is employed to make microchannels for characterising microboiling. In particular the material properties of PDMS facilitate rapid prototyping and its optical transparency provides the capability to directly view any fluid flow. The production of microchannels is complicated by the need to integrate custom made sensors. This paper presents a PDMS microfluidic device with integrated commercial pressure sensors, which have been used to perform a detailed characterisation of microboiling phenomena. The proposed approach of integrating commercial pressure sensors into the channel also has potential applications in a range of other microsystems

Large magnetoresistance anomalies in Dy7Rh3

The compound Dy7Rh3 ordering antiferromagnetically below (TN=) 59 K has been known to exhibit a temperature (T) dependent electrical resistivity (rho) behavior in the paramagnetic state unusual for intermetallic compounds in the sense that there is a broad peak in rho(T) in the paramagnetic state (around 130 K) as though there is a semi-conductor to metal transition. In addition, there is an upturn below T_N due to magnetic super-zone gap effects. Here we report the influence of external magnetic field (H) on the rho(T) behavior of this compound below 300 K. The rise of rho(T) found below TN could be suppressed at very high fields (>> 60 kOe), thus resulting in a very large magnetoresistance (MR) in the magnetically ordered state. The most notable finding is that the magnitude of MR is large for moderate applications of H (say 80 kOe) in a temperature range far above T_N as well, which is untypical of intermetallic compounds. Thus, this compound is characterized by large MR anomalies in the entire T range of investigation.Comment: IOP Selec

The influence of strength of hyperon-hyperon interactions on neutron star properties

An equation of state of neutron star matter with strange baryons has been obtained. The effects of the strength of hyperon-hyperon interactions on the equations of state constructed for the chosen parameter sets have been analyzed. Numerous neutron star models show that the appearance of hyperons is connected with the increasing density in neutron star interiors. The performed calculations have indicated that the change of the hyperon-hyperon coupling constants affects the chemical composition of a neutron star. The obtained numerical hyperon star models exclude large population of strange baryons in the star interior.Comment: 18 pages, 22 figures, accepted to be published in Journal of Physics G: Nuclear and Particle Physic

SIMP (Strongly Interacting Massive Particle) Search

We consider laboratory experiments that can detect stable, neutral strongly interacting massive particles (SIMPs). We explore the SIMP annihilation cross section from its minimum value (restricted by cosmological bounds) to the barn range, and vary the mass values from a GeV to a TeV. We also consider the prospects and problems of detecting such particles at the Tevatron.Comment: Latex. 7 pages, 1 eps figure. Proceedings to the 4th UCLA Symposium on Dark Matter DM2000, Marina del Rey, CA, USA, Feb. 23-25, 200

Tuning the Mechanical and Antimicrobial Performance of a Cu-Based Metallic Glass Composite through Cooling Rate Control and Annealing

The influence of cooling rate on the wear and antimicrobial performance of a Cu52Z41Al7 (at. %) bulk metallic glass (BMG) composite was studied and the results compared to those of the annealed sample (850 °C for 48 h) and to pure copper. The aim of this basic research is to explore the potential use of the material in preventing the spread of infections. The cooling rate is controlled by changing the mould diameter (2 mm and 3 mm) upon suction casting and controlling the mould temperature (chiller on and off). For the highest cooling rate conditions CuZr is formed but CuZr2 starts to crystallise as the cooling rate decreases, resulting in an increase in the wear resistance and brittleness, as measured by scratch tests. A decrease in the cooling rate also increases the antimicrobial performance, as shown by different methodologies (European, American and Japanese standards). Annealing leads to the formation of new intermetallic phases (Cu10Zr7 and Cu2ZrAl) resulting in maximum scratch hardness and antimicrobial performance. However, the annealed sample corrodes during the antimicrobial tests (within 1 h of contact with broth). The antibacterial activity of copper was proved to be higher than that of any of the other materials tested but it exhibits very poor wear properties. Cu-rich BMG composites with optimised microstructure would be preferable for some applications where the durability requirements are higher than the antimicrobial needs

Production of Strange Clusters and Strange Matter in Nucleus-Nucleus Collisions at the AGS

Production probabilities for strange clusters and strange matter in Au+Au collisions at AGS energy are obtained in the thermal fireball model. The only parameters of the model, the baryon chemical potential and temperature, were determined from a description of the rather complete set of hadron yields from Si+nucleus collisions at the AGS. For the production of light nuclear fragments and strange clusters the results are similar to recent coalescence model calculations. Strange matter production with baryon number larger than 10 is predicted to be much smaller than any current experimental sensitivities.Comment: 9 Pages (no figures

Does the advent of modern implant systems and the refinement of free flap technique negate the effect of radiotherapy in oral cancer dental implant based oral rehabilitation

Aim: The aim of this study was to see whether the advent of modern implant systems, and the refinement of free flap techniques, negate the effect of radiotherapy in patients with oral cancer who undergo dental implant–based oral rehabilitation. Materials and method: A retrospective study was performed to look at the success rates of implants placed in all patients, in a 3 year period at the Queen Elizabeth Hospital, Birmingham. Survival rates in irradiated patients were compared with success rates in patients who did receive radiotherapy. Results and conclusions: The rate of failure is comparable in the no radiotherapy group (1.12%) and post-radiotherapy group (1.76%). Our study shows that there was no significant difference in survival when implants were placed in native, grafted bone or in free flap reconstructions in irradiated head and neck cancer patients. Ultimately, the current evidence is not strong enough to prove whether the advent of modern implants systems, and the refinement of free flap techniques, does negate the effect of radiotherapy in patients with oral cancer undergoing dental implant–based oral rehabilitation. There is a need to perform a prospective clinical trial to observe clinical outcomes in both patients who have received radiotherapy and those who have not received radiotherap

In Vitro and In Vivio Evaluation of a Moisture Treatment Cream Containing Three Critical Elements of Natural Skin Moisturization

Objectives To evaluate skin barrier and hydration effects of a new rebalancing moisture treatment (TRMT) and to assess efficacy and tolerability in subjects with photodamaged skin. Methods In an epidermal skin model, tissues (n = 5/group) were topically treated with 25 µL of TRMT, 25 µL of a market‐leading moisturizer (MLM), or untreated for 60 minutes. Hydration was measured at 0, 15, and 30 minutes. Tissues were harvested for gene expression analysis of markers associated with skin barrier and hydration: Claudin (CLD), Aquaporin (AQP), Hyaluronic Acid Syntheses (HAS), and Hyaluronidase (HYAL). A clinical study evaluated twice‐daily application of TRMT, assessing changes in fine lines/wrinkles, brightness, texture, erythema, and tolerability from baseline through week 8. Hydration was measured using electrical impedance. Results TRMT and MLM demonstrated significant increases in hydration vs untreated tissue at each timepoint (P \u3c .005), with greater hydration effects observed for TRMT vs MLM. TRMT‐treated tissues demonstrated greater expression of CLD, AQP, and HA, and reduced expression of HYAL vs untreated and MLM‐treated tissues. Twice‐daily application of TRMT demonstrated significant improvements at 2 weeks in fine lines/wrinkles (P \u3c .001), brightness (P \u3c .0001), texture (P \u3c .0004), and hydration (P \u3c .004). At 8 weeks, statistically significant improvements were achieved in all categories. Conclusion In an epidermal skin model, TRMT demonstrated significant increases in hydration, greater hydration effects, and expression of key markers associated with skin barrier and hydration vs a MLM. Twice‐daily application of TRMT was well tolerated and resulted in early, significant improvements in hydration and visible improvements in skin brightness, texture, fine lines/wrinkles, and erythema at 8 weeks

Safety Study of an Antimicrobial Peptide Lactocin 160, Produced by the Vaginal Lactobacillus rhamnosus

Objective. To evaluate the safety of the antimicrobial peptide, lactocin 160. Methods. Lactocin 160, a product of vaginal probiotic Lactobacillus rhamnosus 160 was evaluated for toxicity and irritation. An in vitro human organotypic vaginal-ectocervical tissue model (EpiVaginal) was employed for the safety testing by determining the exposure time to reduce tissue viability to 50% (ET-50). Hemolytic activity of lactocin160 was tested using 8% of human erythrocyte suspension. Susceptibility of lactobacilli to lactocin160 was also studied. Rabbit vaginal irritation (RVI) model was used for an in vivo safety evaluation. Results. The ET-50 value was 17.5 hours for lactocin 160 (4.9 hours for nonoxynol 9, N9). Hemolytic activity of lactocin 160 was 8.2% (N9 caused total hemolysis). Lactobacilli resisted to high concentrations of peptide preparation. The RVI model revealed slight vaginal irritation. An average irritation index grade was evaluated as “none.” Conclusions. Lactocin 160 showed minimal irritation and has a good potential for intravaginal application

Neutron Star Constraints on the H Dibaryon

We study the influence of a possible H dibaryon condensate on the equation of state and the overall properties of neutron stars whose population otherwise contains nucleons and hyperons. In particular, we are interested in the question of whether neutron stars and their masses can be used to say anything about the existence and properties of the H dibaryon. We find that the equation of state is softened by the appearance of a dibaryon condensate and can result in a mass plateau for neutron stars. If the limiting neutron star mass is about that of the Hulse-Taylor pulsar a condensate of H dibaryons of vacuum mass 2.2 GeV and a moderately attractive potential in the medium could not be ruled out. On the other hand, if the medium potential were even moderately repulsive, the H, would not likely exist in neutron stars. If neutron stars of about 1.6 solar mass were known to exist, attractive medium effects for the H could be ruled out. Certain ranges of dibaryon mass and potential can be excluded by the mass of the Hulse-Taylor pulsar which we illustrate graphically.Comment: Revised by the addition of a figure showing the region of dibaryon mass and potential excluded by the Hulse-Taylor pulsar. 18 pages, 11 figures, latex (submitted to Phys. Rev. C