84 research outputs found
Dispersion of hazardous nanoparticles on beaches around phosphogypsum factories
Anthropogenic occurring nanoparticles (NPs) have been one of the principal catalytic components of marine pollution throughout its history. The phosphogypsum (PG) factories present environmental risks and evident marine pollution in different parts of the world. Many of these factors continue to operate, however, some have already been abandoned by the private sector. The general objective of this manuscript is to analyze the real nanoparticles (NPs) present on a beach in southern Brazil to illustrate the need to create public policies and projects for environmental recovery. This work focused on real representative sampling of suspended sediments (SSs), and on a modern analytical procedure via advanced electron microscopes (field emission scanning electron microscope-FE-SEM and high resolution transmission electron microscope-HR-TEM coupled with an energy dispersive X-ray microanalysis system-EDS) to analyze NPs containing hazardous elements (HEs). The results presented in this work demonstrate who the size, morphology, among other physical-geochemical characteristics influence in the adsorption of HEs by the NPs and their respective agglomerates. This study is of great importance for carrying out the application of advanced techniques and methods to better understand the formation and transport of NPs on beaches, which allows assisting in the management of waste from plaster factories on a global scale
Nanomineralogy of mortars and ceramics from the Forum of Caesar and Nerva (Rome, Italy): The protagonist of black crusts produced on historic buildings
The recent focus of the impacts of atmospheric pollution on effective conservation methods for historic structures of great cultural heritage has been shown to be of critical importance for preservation. This work focuses on medieval Roman mortars and ceramics from the historic Forum of Caesar and Nerva, in Rome, Italy, and analyzes the urgency of repair of defects in rendered façades based on the inspection of surfaces where defects were detected, defining a methodology to predict the repair urgency of defects and building elements. X-ray spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), and X-ray powder diffraction (XRD) analyses are well equipped to study mineralogy, ultra-fine particles, and nanoparticles (NPs, minerals and amorphous phases) that are present in medieval Roman ruins. Applied analysis of ruin-derived mortar and ceramics detected the presence of materials, primarily constituted of quartz, alumino-silicates, Fe-hydr/oxides, portions of amorphous phases, calcareous minerals, pyroxene, and carbonaceous materials. The Forum of Caesar and Nerva are two of the greatest remaining symbols of historic Roman construction. Many compounds recognized by XRD can be revealed by advanced microscopies and vice versa. The incidence of NPs containing potentially toxic elements (PTEs), and numerous carbonaceous complexes linked with building material alterations due to moisture and atmospheric contamination were also discovered. This study assesses the philosophies of preservation and culture, while considering the exhaust emitted by vehicular traffic in order to propose a justifiable and effective method to best conserve historic Roman structures located in high traffic areas
An overview of geological originated materials as a trend for adsorption in wastewater treatment
Adsorption is a unit operation widely used for the tertiary treatment of the most diverse effluents, whose mechanism is based on removing recalcitrant compounds from the organic and inorganic origin. In this process, choosing a suitable adsorbent is a fundamental point. This review article focuses on the adsorbents with natural geological origin: minerals, clays, geopolymers, and even wastes resulted from mining activity. Therefore, over 450 articles and research papers were explored. These materials' main sources are described, and their characteristics, composition, and intrinsic properties are related to adsorption. Herein, we discuss the effects of several process parameters, such as pH, temperature, pollutant, and adsorbent concentration. Furthermore, equilibrium, kinetics, and thermodynamic aspects are also addressed, and relevant regeneration prospects and final disposal. Finally, some suggestions and perspectives on applying these adsorbents in wastewater treatment are presented as future trends
Soil contamination in colombian playgrounds: effects of vehicles, construction, and traffic
The presence of potentially hazardous elements (PHEs) in playground soils is generally associated with anthropogenic sources such as vehicle traffic, industries, construction sites, and biomass burning. Studies indicate that PHEs are harmful to human health and may even be carcinogenic. Therefore, the aim of this study was to evaluate the physicochemical, morphological, and mineralogical properties of soil samples from three public playgrounds located in the cities of Bogota, Medellin, and Barranquilla. Besides, the possible impacts caused by the aerodynamics of particles in Colombian cities were verified. The morphology, composition, and structure of the nanoparticles (NPs) (< 100 nm) present in these soils were evaluated by field emission scanning electron microscopy (FE-SEM) equipped with high-precision field emission (FE) and high-resolution transmission electron microscopy (HR-TEM). Soil samples were predominantly feldspar, quartz, and, to a lesser extent, clay minerals, carbonates, and hematites. The average content of PHEs was anthropogenically enriched in relation to the upper continental crust. As and Sn showed a large spatial variation, indicating the influence of local sources, such as vehicle traffic and industries. There is an inverse relationship between the total concentrations of some elements and their leachable fractions. The accumulation of traffic-derived PHEs has a negative impact on human health and the environment, which is alarming, especially for elements such as Pb, Sb, or As. Therefore, the presence of PHEs should receive greater attention from public health professionals, and limits should be set and exposures controlled. This study includes the construction of a baseline that provides basic information on pollution, its sources, and exposure routes for humans in the vicinity of Colombia’s major cities, characterized by their increasing urbanization and industrialization
Nanoparticles from evaporite materials in Colombian coal mine drainages
Ultrathin and nanometric materials (minerals and amorphous phases) are detected in transitory deposits of potential hazardous elements (PHEs), especially in acidic coal mine drainages. The main goal of this work was to evaluate the occurrence of PHEs in nanoparticles (NPs) in evaporative structures in coal mining areas with high concentrations of PHEs. The precipitates were sampled in several coal mining areas in Colombia, with the purpose of evaluating the geochemical and environmental structures. In the present work, to better diagnose areas affected by coal mining, an innovative analytical procedure is proposed to define the association between PHEs in mine drainage sediments. The procedure includes the analytical study with X-Ray Diffraction (XRD) and advanced electron microscopy, before and after a series of sequential extractions to separate amorphous, magnetic, and crystalline compounds. Of the three main types of precipitates identified, the yellowish precipitates had the highest amounts of PHEs while the white precipitates had only small amounts of PHEs and the greenish precipitates contained TiO2 nanoparticles. The results from this study will be usable for more than fifty countries that have coal mine drainages
An overview of forest residues as promising low-cost adsorbents
Anthropogenic activities have severely affected biogeochemical cycles on a global scale, resulting in a drastic increase in environmental problems, intensified by wastewater generation containing high levels of pollutants. As it is known that water is precious yet limited, viable wastewater treatments must be developed. Adsorption is an environmentally friendly option, and it offers the possibility of resolving two problems simultaneously. Besides removing pollutants from water, many adsorbents can be produced using wooden forestry residues. Such materials are generally considered as waste, which leads to their direct disposal. In addition, there are types of wooden forestry waste that have little or no use for humankind, such as fallen leaves or rotten fruits. Therefore, the utilization of wooden forestry residues for preparing low-cost adsorbents is promising. In this review, we briefly approach adsorption advantages to wastewater treatment. Later on, we focus on several types of wooden forestry residues as alternative low-cost adsorbents. © 2021 International Association for Gondwana Research
Biosorption of Neodymium (Nd) from Aqueous Solutions Using Spirulina platensis sp. Strains
Rare earth elements such as neodymium (Nd) are important elements used mainly in developing new technologies. Although they are found in low concentrations in nature, they can be obtained by extracting solid samples such as phosphogypsum. Among the techniques, adsorption has been used successfully with several adsorbent materials. In this work, two strains of Spirulina platensis (LEB-18 and LEB-52) were employed as biosorbents for efficiently removing the Nd element from the aqueous media. Biosorption tests were carried out in a batch system, and the results of the biosorption kinetics showed that for both materials, the biosorption of Nd was better described by the Avrami model. Moreover, it could be considered that 80 min would be necessary to attain the equilibrium of Nd(III) using both biosorbents. The result of the biosorption isotherms showed that for both strains, the best-fitted model was the Liu model, having a maximum biosorption capacity of 72.5 mg g(-1) for LEB-18 and 48.2 mg g(-1) for LEB-52 at a temperature of 298 K. Thermodynamics of adsorption showed that for both LEB-18 and LEB-52 the process was favorable ( increment G degrees < 0) and exothermic ( increment H degrees -23.2 for LEB-18 and increment H degrees -19.9 for LEB-52). Finally, both strains were suitable to uptake Nd, and the better result of LEB-18 could be attributed to the high amount of P and S groups in this biomass. Based on the results, a mechanism of electrostatic attraction of Nd3+ and phosphate and sulfate groups of both strains of Spirulina platensis was proposed
Adsorption of omeprazole on biobased adsorbents doped with Si/Mg: kinetic, equilibrium, and thermodynamic studies
This paper proposes an easy and sustainable method to prepare high-sorption capacity biobased adsorbents from wood waste. A biomass wood waste (spruce bark) was employed to fabricate a composite doped with Si and Mg and applied to adsorb an emerging contaminant (Omeprezole) from aqueous solutions, as well as synthetic effluents loaded with several emerging contaminants. The effects of Si and Mg doping on the biobased material’s physicochemical properties and adsorptive performance were evaluated. Si and Mg did not influence the specific surface area values but impacted the presence of the higher number of mesopores. The kinetic and equilibrium data presented the best fitness by the Avrami Fractional order (AFO) and Liu isotherm models, respectively. The values of Qmax ranged from 72.70 to 110.2 mg g−1 (BP) and from 107.6 to 249.0 mg g−1 (BTM). The kinetic was faster for Si/Mg-doped carbon adsorbent, possibly due to different chemical features provoked by the doping process. The thermodynamic data showed that the adsorption of OME on biobased adsorbents was spontaneous and favorable at four studied temperatures (283, 293, 298, 303, 308, 313, and 318 K), with the magnitude of the adsorption correspondent to a physical adsorption process (ΔH° −1). The adsorbents were applied to treat synthetic hospital effluents and exhibited a high percentage of removal (up to 62%). The results of this work show that the composite between spruce bark biomass and Si/Mg was an efficient adsorbent for OME removal. Therefore, this study can help open new strategies for developing sustainable and effective adsorbents to tackle water pollution
A comparative study of chemical treatment by MgCl2, ZnSO4, ZnCl2, and KOH on physicochemical properties and acetaminophen adsorption performance of biobased porous materials from tree bark residues
- …