Análise de falhas de um gerador de vapor usando as ferramentas FMEA e FTA

A integridade estrutural de um gerador de vapor pode ser afetada por diversos fatores, como o tipo de material que compõe a estrutura, a qualidade das juntas soldadas, os parâmetros de fabricação da caldeira e os procedimentos operacionais.Neste contexto, a corrosão se destaca como uma das principais fontes de degradação podendo levar essas superfícies sob pressão a um completo colapso. Neste estudo, foi realizada uma análise de falhas para investigar o processo que leva à ruptura e à corrosão em uma caldeira, utilizando as ferramentas FMEA (Análise de modos de falhas e efeitos) e FTA (Análise da árvore de falhas). Ensaios metalográficos de amostras da estrutura e um estudo físico-químico da água de alimentação do sistema também foram analisados. Os ensaios metalográficos evidenciaram pequenas fissuras no metal de base, além de falta de penetração na junta soldada e um desalinhamento de junta. A análise da água mostrou uma alta concentração de íons cloreto e um baixo pH da água de alimentação, fatores que causam a ruptura da camada passiva e resultam em corrosão. O uso das ferramentas FMEA e FTA possibilitaram a compreensão de fatores que atuam como concentradores de tensão, associados à inferior qualidade da água de alimentação do gerador de vapor e erros durante o processo de soldagem, que resultaram em corrosão localizada seguida de ruptura e vazamento de água líquida e em vapor.Palavras-chave: Caldeiras, corrosão, FMEA, FTA.

Sistema para desobstrução ou limpeza de dutos através de uma reação local controlada

PETROBRASUniversidade Federal do Rio Grande do SulEngenhariaDepositad

Mechanical behaviour of a green composite from biopolymers reinforced with sisal fibres

In recent years, green composites based on thermoplastic matrices from renewable sources, and reinforced with natural fibres, have gained significant importance in different industrial applications, due to lower environmental impacts and production costs than traditional composites. This work investigates the manufacturing process, fibre/matrix integration and mechanical properties of a novel environmentally friendly green composite with a recyclable biobased polymer from a renewable source and a biodegradable natural fibre. Untreated woven sisal fibres reinforced post-consumer green polyethylene composites were evaluated in terms of flexural, tensile and impact properties. Traditional and green high-density polyethylene (HDPE), originated from sugarcane ethanol, were utilised as matrices of the investigated composites. Woven sisal fibres were arranged in two different stacking sequences, i.e. [0°/90°] and [± 45°], being incorporated into the HDPE with a mass percentage proportion of 30/70 (fibre/matrix). A low-cost manufacturing process based on the hot compression moulding was used to produce the composites. The results were analysed by a factorial design to identify the effects of polyethylene type and the use of woven sisal fibres, considering the [0°/90°] and [± 45°] orientations. Thermal gravimetric analysis was used to verify the thermal stability of the sisal fibre. The topographic surface of sisal fibres was observed by scanning electron microscopy. The results showed that the use of green polyethylene reinforced with untreated woven sisal fibres achieved higher flexural modulus (35%), flexural strength (13%), tensile strength (39%) and ultimate strain (68%) than traditional polyethylene without reinforcement. The green composite presented promising mechanical results to replace materials from non-renewable sources and can reduce manufacturing costs of the final product. These composite materials can be efficient for structural applications such as insulated panels, drywall and partitions for furniture

Recycled Green PE Composites Reinforced with Woven and Randomly Arranged Sisal Fibres Processed by Hot Compression Moulding

Green plastics are constantly being used to minimize the negative impacts of the polymers made of fossil fuels such as petroleum. Non-renewable petroleum-based products are employed in wide range of human activities, yet plastic waste accumulation represents a serious issue for the environment (Mohd Rafee et al., 2019). On the other hand, the use of natural fibres in composite materials, such as sisal fibres, in substitution for synthetic fibres, has increased considerably. The aim of this study was to develop a low-cost manufacturing process of composites with reuse of polyethylene bags made of sugarcane ethanol (green polyethylene) reinforced with sisal fibres. The hot compression moulding (185 °C) was used to mould composite structural board. Tensile tests were conducted to evaluate the influence of the reinforcement configuration on the mechanical properties of the composites, considering two arrangements: woven fibres in (0°/90°) and randomly arranged. The results indicated that the use of woven sisal fibres in (0°/90°) as reinforcement of the green HDPE showed an increase in the tensile strength (33.30%) in contrast to the pure traditional HDPE. Randomly arranged sisal fibre-reinforced green HDPE composites showed higher modulus of elasticity than pure traditional HDPE (76.83%). Composites with woven sisal fibres showed higher values for tensile strength and ultimate strain, and lower modulus of elasticity than composites with randomly arranged sisal fibres. In addition, failure modes of the composites were observed. The results showed the viability of producing these composites by the developed equipment and the potential use of these materials as structural components

Brazilian Flora 2020: Leveraging the power of a collaborative scientific network

International audienceThe shortage of reliable primary taxonomic data limits the description of biological taxa and the understanding of biodiversity patterns and processes, complicating biogeographical, ecological, and evolutionary studies. This deficit creates a significant taxonomic impediment to biodiversity research and conservation planning. The taxonomic impediment and the biodiversity crisis are widely recognized, highlighting the urgent need for reliable taxonomic data. Over the past decade, numerous countries worldwide have devoted considerable effort to Target 1 of the Global Strategy for Plant Conservation (GSPC), which called for the preparation of a working list of all known plant species by 2010 and an online world Flora by 2020. Brazil is a megadiverse country, home to more of the world's known plant species than any other country. Despite that, Flora Brasiliensis, concluded in 1906, was the last comprehensive treatment of the Brazilian flora. The lack of accurate estimates of the number of species of algae, fungi, and plants occurring in Brazil contributes to the prevailing taxonomic impediment and delays progress towards the GSPC targets. Over the past 12 years, a legion of taxonomists motivated to meet Target 1 of the GSPC, worked together to gather and integrate knowledge on the algal, plant, and fungal diversity of Brazil. Overall, a team of about 980 taxonomists joined efforts in a highly collaborative project that used cybertaxonomy to prepare an updated Flora of Brazil, showing the power of scientific collaboration to reach ambitious goals. This paper presents an overview of the Brazilian Flora 2020 and provides taxonomic and spatial updates on the algae, fungi, and plants found in one of the world's most biodiverse countries. We further identify collection gaps and summarize future goals that extend beyond 2020. Our results show that Brazil is home to 46,975 native species of algae, fungi, and plants, of which 19,669 are endemic to the country. The data compiled to date suggests that the Atlantic Rainforest might be the most diverse Brazilian domain for all plant groups except gymnosperms, which are most diverse in the Amazon. However, scientific knowledge of Brazilian diversity is still unequally distributed, with the Atlantic Rainforest and the Cerrado being the most intensively sampled and studied biomes in the country. In times of “scientific reductionism”, with botanical and mycological sciences suffering pervasive depreciation in recent decades, the first online Flora of Brazil 2020 significantly enhanced the quality and quantity of taxonomic data available for algae, fungi, and plants from Brazil. This project also made all the information freely available online, providing a firm foundation for future research and for the management, conservation, and sustainable use of the Brazilian funga and flora