Experience with 3-D composite grids

Experience with the three-dimensional (3-D), chimera grid embedding scheme is described. Applications of the inviscid version to a multiple-body configuration, a wind/body/tail configuration, and an estimate of wind tunnel wall interference are described. Applications to viscous flows include a 3-D cavity and another multi-body configuration. A variety of grid generators is used, and several embedding strategies are described

Matrix Method of Determining the Longitudinal-Stability Coefficients and Frequency Response of an Aircraft from Transient Flight Data

A matrix method is presented for determining the longitudinal-stability coefficients and frequency response of an aircraft from arbitrary maneuvers. The method is devised so that it can be applied to time-history measurements of combinations of such simple quantities as angle of attack, pitching velocity, load factor, elevator angle, and hinge moment to obtain the over-all coefficients. Although the method has been devised primarily for the evaluation of stability coefficients which are of primary interest in most aircraft loads and stability studies, it can be used also, with a simple additional computation, to determine the frequency-response characteristics. The entire procedure can be applied or extended to other problems which can be expressed by linear differential equations

Horizontal tail loads in maneuvering flight

A method is given for determining the horizontal tail loads in maneuvering flight. The method is based upon the assignment of a load-factor variation with time and the determination of a minimum time to reach peak load factor. The tail load is separated into various components. Examination of these components indicated that one of the components was so small that it could be neglected for most conventional airplanes; therefore, the number of aerodynamic parameters needed in this computation of tail loads was reduced to a minimum. In order to illustrate the method, as well as to show the effect of the main variables, a number of examples are given. Some discussion is given regarding the determination of maximum tail loads, maximum pitching accelerations, and maximum pitching velocities obtainable

Chromatic dispersion monitoring for high-speed WDM systems using two-photon absorption in a semiconductor microcavity

This paper presents a theoretical and experimental investigation into the use of a two-photon absorption (TPA) photodetector for use in chromatic dispersion (CD) monitoring in high-speed, WDM network. In order to overcome the inefficiency associated with the nonlinear optical-to-electrical TPA process, a microcavity structure is employed. An interesting feature of such a solution is the fact that the microcavity enhances only a narrow wavelength range determined by device design and angle at which the signal enters the device. Thus, a single device can be used to monitor a number of different wavelength channels without the need for additional external filters. When using a nonlinear photodetector, the photocurrent generated for Gaussian pulses is inversely related to the pulsewidth. However, when using a microcavity structure, the cavity bandwidth also needs to be considered, as does the shape of the optical pulses incident on the device. Simulation results are presented for a variety of cavity bandwidths, pulse shapes and durations, and spacing between adjacent wavelength channels. These results are verified experimental using a microcavity with a bandwidth of 260 GHz (2.1 nm) at normal incident angle, with the incident signal comprising of two wavelength channels separated by 1.25 THz (10 nm), each operating at an aggregate data rate of 160 Gb/s. The results demonstrate the applicability of the presented technique to monitor accumulated dispersion fluctuations in a range of 3 ps/nm for 160 Gb/s RZ data channel

What guidance are researchers given on how to present network meta-analyses to end-users such as policymakers and clinicians? A systematic review

© 2014 Sullivan et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Introduction: Network meta-analyses (NMAs) are complex methodological approaches that may be challenging for non-technical end-users, such as policymakers and clinicians, to understand. Consideration should be given to identifying optimal approaches to presenting NMAs that help clarify analyses. It is unclear what guidance researchers currently have on how to present and tailor NMAs to different end-users. Methods: A systematic review of NMA guidelines was conducted to identify guidance on how to present NMAs. Electronic databases and supplementary sources were searched for NMA guidelines. Presentation format details related to sample formats, target audiences, data sources, analysis methods and results were extracted and frequencies tabulated. Guideline quality was assessed following criteria developed for clinical practice guidelines. Results: Seven guidelines were included. Current guidelines focus on how to conduct NMAs but provide limited guidance to researchers on how to best present analyses to different end-users. None of the guidelines provided reporting templates. Few guidelines provided advice on tailoring presentations to different end-users, such as policymakers. Available guidance on presentation formats focused on evidence networks, characteristics of individual trials, comparisons between direct and indirect estimates and assumptions of heterogeneity and/or inconsistency. Some guidelines also provided examples of figures and tables that could be used to present information. Conclusions: Limited guidance exists for researchers on how best to present NMAs in an accessible format, especially for non-technical end-users such as policymakers and clinicians. NMA guidelines may require further integration with end-users' needs, when NMAs are used to support healthcare policy and practice decisions. Developing presentation formats that enhance understanding and accessibility of NMAs could also enhance the transparency and legitimacy of decisions informed by NMAs.The Canadian Institute of Health Research (CIHR) Drug Safety and Effectiveness Network (Funding reference number – 116573)

Upper extremity compartment syndrome after minor trauma: an imperative for increased vigilance for a rare, but limb-threatening complication

BACKGROUND: Compartment syndrome of any extremity is a limb-threatening emergency requiring an emergent surgical management. Thus, ruling out compartment syndrome is often high on the list of priorities when treating high-energy injuries and fractures. However, even in the most seemingly benign injuries, this dangerous diagnosis must always remain on the differential and suspicion must remain high. CASE PRESENTATION: 23-year-old factory worker presents after a low energy entrapment injury to his left forearm. Initial work-up and evaluation noted an isolated radial head dislocation with a normal physical motor and sensory exam. However, maintaining high suspicion for compartment syndrome despite serial normal physical exams, led objective compartment pressure measurement leading to definitive diagnosis. Emergent surgical intervention via compartment fasciotomies was performed, along with closed reduction and ligament repair. At 1 year follow-up, the patient was well-healed, back to work with full range of motion and not activity limitations. CONCLUSION: Despite a seemingly benign injury pattern, and a relatively low energy mechanism, vigilant concern for compartment syndrome following any kind of entrapment injury should initiate serial examinations and compartment pressure measurements especially in circumstances with continued swelling and inability to perform an accurate clinical assessment due to an obtunded or medicated patient