Vascular endothelial cell-surface proteoglycans

A predominant species of heparan sulfate proteoglycan that consisted of at least two subunits linked by disulfide bonding was isolated from cell layers of normal ("cobblestone") bovine vascular endothelial cells in culture. Treatment of the parent molecules with dithiothreitol caused their complete cleavage and permitted the subsequent separation of the larger and smaller subunits on Sepharose CL4B columns. Removal of dithiothreitol by dialysis resulted in the reformation of large disulfide-bonded molecules but such recombination of the subunits was prevented by prior reductive alkylation using iodoacetamide. Buoyant density gradient analysis as well as gel chromatography on Sepharose CL6B columns, following alkaline borohydride and nitrous ac i d treatment of individual carbohydrate-rich subunits, showed that the latter consisted of core proteins associated solely with heparan sulfate glycosaminoglycans. The sizes of the latter were estimated by chromatographic techniques to be approximately 50 000 and 14 000 daltons in the case of the larger and smaller subunits, respectively. This is the first description of disulfide-bonded proteoheparan sulfates in bovine aortic endothelial cells. Studies of the effects of various extracellular matrices on the proliferative behaviour of bovine aortic endothelial cells in culture revealed that extracellular matrix material from rat smooth muscle cells stimulated proliferation more than did other matrices. Bovine aortic endothelial cells also changed their morphology and cell-surface proteoglycan profiles in response to particular extracellular matrices. Enzymic modifications of matrices did not, however, cause noticeable changes in the cell surface proteoglycans synthesized by bovine aortic endothelial cells. This discrepancy suggested that the observed differences in cell-surface proteoglycan profiles cannot be ascribed to any specific single constituent of the extracellular matrix but that its overall architecture may be the sole determinant of such differences. When the turnover of endothelial cell proteoglycans was assessed, degradation of both intracellular and pericellular proteoglycans was inhibited by lysosomotropic agents. This indicated that these macromolecules may be degraded within the lysosomes; the cell layer proteoglycans are apparently internalized prior to their degradation in this location. Failure by both NH₄Cl and chloroquine completely to block the degradation of intracellular as well as pericellular proteoglycans suggested that other mechanisms of degradation also exist. The results extend biochemical data on endothelial cell surface proteoglycans

Combination of tunicamycin with anticancer drugs synergistically enhances their toxicity in multidrug-resistant human ovarian cystadenocarcinoma cells

BACKGROUND: The pharmacologic modulatory effects of the antibiotic, tunicamycin (TM), on multidrug-resistant human UWOV2 ovarian cancer cells are reported. The UWOV2 cell line was derived from a cystadenocarcinoma in a patient refractory to combination chemotherapy with actinomycin D, vincristine (VCR), cis-diaminedichloroplatinum (II) (CDDP) and doxorubicin (DXR). In an attempt to explain drug resistance in this cell line, we examined the effects of TM on their sensitivity to various anticancer drugs, the uptake, efflux and retention of [(3)H]VCR, and their ability to bind [(14)C]DXR and [(3)H]azidopine (AZD), a photoaffinity label of the multidrug transporter, P-glycoprotein (Pgp). RESULTS: TM effectively decreased the EC(50 )for DXR, EXR, VCR and CDDP, thus enhancing their cytotoxicity. The antibiotic also prolonged the intracellular retention time of [(3)H]VCR and increased the binding of both [(14)C]DXR and [(3)H]AZD to the cells. CONCLUSION: It is concluded that the pharmacomodulatory effects of TM in these cells are mediated by global inhibition of protein and glycoprotein synthesis and synergistic interaction with antineoplastic drugs. The ability of TM to enhance the sensitivity of drug resistant tumour cells may have impact on the design and optimization of novel resistance modifiers to improve the efficacy of combination treatment of intractable neoplasms

Combination of tunicamycin with anticancer drugs synergistically enhances their toxicity in multidrug-resistant human ovarian cystadenocarcinoma cells

Abstract Background The pharmacologic modulatory effects of the antibiotic, tunicamycin (TM), on multidrug-resistant human UWOV2 ovarian cancer cells are reported. The UWOV2 cell line was derived from a cystadenocarcinoma in a patient refractory to combination chemotherapy with actinomycin D, vincristine (VCR), cis-diaminedichloroplatinum (II) (CDDP) and doxorubicin (DXR). In an attempt to explain drug resistance in this cell line, we examined the effects of TM on their sensitivity to various anticancer drugs, the uptake, efflux and retention of [3H]VCR, and their ability to bind [14C]DXR and [3H]azidopine (AZD), a photoaffinity label of the multidrug transporter, P-glycoprotein (Pgp). Results TM effectively decreased the EC50 for DXR, EXR, VCR and CDDP, thus enhancing their cytotoxicity. The antibiotic also prolonged the intracellular retention time of [3H]VCR and increased the binding of both [14C]DXR and [3H]AZD to the cells. Conclusion It is concluded that the pharmacomodulatory effects of TM in these cells are mediated by global inhibition of protein and glycoprotein synthesis and synergistic interaction with antineoplastic drugs. The ability of TM to enhance the sensitivity of drug resistant tumour cells may have impact on the design and optimization of novel resistance modifiers to improve the efficacy of combination treatment of intractable neoplasms

Investigation of Aromatic/Aliphatic Polyimides as Dispersants for Single Wall Carbon Nanotubes

Novel aromatic/aliphatic polyimides were prepared from 2,7-diamino-9,9'- dioctylfluorene (AFDA) and aromatic dianhydrides. Upon investigating the effectiveness of these polyimides for dispersing single wall carbon nanotubes (SWNTs) in solution, three were discovered to disperse SWNTs in N,N-dimethylacetamide (DMAc). Two of these polyimides, one from 3,3',4,4'-oxydiphthalic anhydride (ODPA) and one from symmetric 3,3',4,4'-biphenyltetracarboxylic dianhydride (s-BPDA), were used to prepare nanocomposites. Homogeneous polyimide/SWNT suspensions from both polymers were used in the preparation of films and fibers containing up to 1 wt% SWNTs. The samples were thermally treated to remove residual solvent and the films were characterized for SWNT dispersion by optical and high resolution scanning electron microscopy (HRSEM). Electrical and mechanical properties of the films were also determined. Electrospun fibers were examined by HRSEM to characterize SWNT alignment and orientation

Multifunctional, High-Temperature Nanocomposites

In experiments conducted as part of a continuing effort to incorporate multifunctionality into advanced composite materials, blends of multi-walled carbon nanotubes and a resin denoted gPETI-330 h (wherein gPETI h is an abbreviation for gphenylethynyl-terminated imide h) were prepared, characterized, and fabricated into moldings. PETI-330 was selected as the matrix resin in these experiments because of its low melt viscosity (2 hours at 280 C), and high temperature performance (>1,000 hours at 288 C). The multi-walled carbon nanotubes (MWCNTs), obtained from the University of Kentucky, were selected because of their electrical and thermal conductivity and their small diameters. The purpose of these experiments was to determine the combination of thermal, electrical, and mechanical properties achievable while still maintaining melt processability. The PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight-percent of MWCNTs by dry mixing of the constituents in a ball mill using zirconia beads. The resulting powders were characterized for degree of mixing and thermal and rheological properties. The neat resin was found to have melt viscosity between 5 and 10 poise. At 280 C and a fixed strain rate, the viscosity was found to increase with time. At this temperature, the phenylethynyl groups do not readily react and so no significant curing of the resin occurred. For MWCNT-filled samples, melt viscosity was reasonably steady at 280 C and was greater in samples containing greater proportions of MWCNTs. The melt viscosity for 20 weightpercent of MWCNTs was found to be .28,000 poise, which is lower than the initial estimated allowable maximum value of 60,000 poise for injection molding. Hence, MWCNT loadings of as much as 20 percent were deemed to be suitable compositions for scale-up. High-resolution scanning electron microscopy (HRSEM) showed the MWCNTs to be well dispersed in the polymer matrices, while high-resolution transmission electron microscopy shows splits in the walls of the MWCNTs but no catastrophic breakage of tubes. To further assess processing characteristics prior to scale-up, samples containing 10, 15, and 20 weight-percent of MWCNTs were processed through a laboratory melting extruder. HRSEM of the extruded fibers shows significant alignment of MWCNTs in the flow direction (see figure). For the samples containing 20 weight-percent of MWCNTs, difficulties were encountered during feeding, and the temperature of a rotor in the extruder rose to 245 C because of buildup of frictional heat; this indicates that materials of this type having MWCNT concentrations .20 weight- percent may not be melt-processable. On the basis of the results from the foregoing characterizations, samples containing 10, 15, and 20 weight-percent of MWCNTs were scaled up to masses of .300 g and used to make specimens having dimensions of 10.2 by 15.2 by 0.32 cm. These specimens were molded by (1) injecting the mixtures, at temperatures between 260 and 280 C, into a tool made of the low-thermal-expansion alloy InvarR and then (2) curing for 1 hour at 371 C. The tool was designed to impart shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction

Rationale, design and methods for a randomised and controlled trial to evaluate "Animal Fun" - a program designed to enhance physical and mental health in young children

Background: Children with poor motor ability have been found to engage less in physical activities than other children, and a lack of physical activity has been linked to problems such as obesity, lowered bone mineral density and cardiovascular risk factors. Furthermore, if children are confident with their fine and gross motor skills, they are more likely to engage in physical activities such as sports, crafts, dancing and other physical activity programs outside of the school curriculum which are important activities for psychosocial development. The primary objective of this project is to comprehensively evaluate a whole of class physical activity program called Animal Fun designed for Pre-Primary children. This program was designed to improve the child's movement skills, both fine and gross, and their perceptions of their movement ability, promote appropriate social skills and improve social-emotional development. Methods: The proposed randomized and controlled trial uses a multivariate nested cohort design to examine the physical (motor coordination) and psychosocial (self perceptions, anxiety, social competence) outcomes of the program. The Animal Fun program is a teacher delivered universal program incorporating animal actions to facilitate motor skill and social skill acquisition and practice. Pre-intervention scores on motor and psychosocial variables for six control schools and six intervention schools will be compared with post-intervention scores (end of Pre-Primary year) and scores taken 12 months later after the children's transition to primary school Year 1. 520 children aged 4.5 to 6 years will be recruited and it is anticipated that 360 children will be retained to the 1 year follow-up. There will be equal numbers of boys and girls.Discussion: If this program is found to improve the child's motor and psychosocial skills, this will assist in the child's transition into the first year of school. As a result of these changes, it is anticipated that children will have greater enjoyment participating in physical activities which will further promote long term physical and mental health

Status of maritime gas cooled reactors.

http://archive.org/details/statusofmaritime00cur