24 research outputs found
Recommended from our members
Bio-functional subwavelength optical waveguides for biodetection
We report a versatile biofunctional subwavelength photonic device platform for real-time detection of biological molecules. Our devices contain lipid bilayer membranes fused onto metal oxide nanowire waveguides stretched across polymeric flow channels. The lipid bilayers incorporating target receptors are submersed in the propagating evanescent field of the optical cavity. We show that the lipid bilayers in our devices are continuous, have very high mobile fraction, and are resistant to fouling. We also demonstrate that our platform allows rapid membrane exchange. Finally we use this device for detection of specific DNA sequences in solution by anchoring complementary DNA target strands in the lipid bilayer. This evanescent wave sensing architecture holds great potential for portable, all-optical detection systems
Plasmonic tuning of aluminum doped zinc oxide nanostructures by atomic layer deposition
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/109627/1/pssr201409359.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/109627/2/pssr201409359-sup-0001-figuresS1-S10_tableS1.pd
Near-perfect broadband absorption from hyperbolic metamaterial nanoparticles
Broadband absorbers are essential components of many light detection, energy harvesting, and camouflage schemes. Current designs are either bulky or use planar films that cause problems in cracking and delamination during flexing or heating. In addition, transferring planar materials to flexible, thin, or low-cost substrates poses a significant challenge. On the other hand, particle-based materials are highly flexible and can be transferred and assembled onto a more desirable substrate but have not shown high performance as an absorber in a standalone system. Here, we introduce a class of particle absorbers called transferable hyperbolic metamaterial particles (THMMP) that display selective, omnidirectional, tunable, broadband absorption when closely packed. This is demonstrated with vertically aligned hyperbolic nanotube (HNT) arrays composed of alternating layers of aluminum-doped zinc oxide and zinc oxide. The broadband absorption measures >87% from 1,200 nm to over 2,200 nm with a maximum absorption of 98.1% at 1,550 nm and remains large for high angles. Furthermore, we show the advantages of particle-based absorbers by transferring the HNTs to a polymer substrate that shows excellent mechanical flexibility and visible transparency while maintaining near-perfect absorption in the telecommunications region. In addition, other material systems and geometries are proposed for a wider range of applications
Gap controlled plasmon-dielectric coupling effects investigated with single nanoparticle-terminated atomic force microscope probes
Precise positioning of a plasmonic nanoparticle (NP) near a small dielectric surface is not only necessary for understanding gap-dependent interactions between a metal and dielectric but it is also a critical component in building ultrasensitive molecular rulers and force sensing devices. In this study we investigate the gap-dependent scattering of gold and silver NPs by controllably depositing them on an atomic force microscope (AFM) tip and monitoring their scattering within the evanescent field of a tin dioxide nanofiber waveguide. The enhanced distance-dependent scattering profiles due to plasmon-dielectric coupling effects show similar decays for both gold and silver NPs given the strong dependence of the coupling on the decaying power in the near-field. Experiments and simulations also demonstrate that the NPs attached to the AFM tips act as free NPs, eliminating optical interference typically observed from secondary dielectric substrates. With the ability to reproducibly place individual plasmonic NPs on an AFM tip, and optically monitor near-field plasmon-dielectric coupling effects, this approach allows a wide-variety of light-matter interactions studies to be carried out on other low-dimensional nanomaterials.National Science Foundation [ECCS 1150952]; University of California, Office of the President [UC-LFRP 12-LR-238415]12 Month Embargo.This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
Piezoelectric Nanoparticle–Polymer Composite Foams
Piezoelectric polymer composite foams
are synthesized using different sugar-templating strategies. By incorporating
sugar grains directly into polydimethylsiloxane mixtures containing
barium titanate nanoparticles and carbon nanotubes, followed by removal
of the sugar after polymer curing, highly compliant materials with
excellent piezoelectric properties can be fabricated. Porosities and
elasticity are tuned by simply adjusting the sugar/polymer mass ratio
which gave an upper bound on the porosity of 73% and a lower bound
on the elastic coefficient of 32 kPa. The electrical performance of
the foams showed a direct relationship between porosity and the piezoelectric
outputs, giving piezoelectric coefficient values of ∼112 pC/N
and a power output of ∼18 mW/cm<sup>3</sup> under a load of
10 N for the highest porosity samples. These novel materials should
find exciting use in a variety of applications including energy scavenging
platforms, biosensors, and acoustic actuators
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Here we demonstrate that efficient piezoelectric nanoparticle–polymer composite materials can be optically printed into three-dimensional (3D) microstructures using digital projection printing. Piezoelectric polymers were fabricated by incorporating barium titanate (BaTiO<sub>3</sub>, BTO) nanoparticles into photoliable polymer solutions such as polyethylene glycol diacrylate and exposing to digital optical masks that could be dynamically altered to generate user-defined 3D microstructures. To enhance the mechanical-to-electrical conversion efficiency of the composites, the BTO nanoparticles were chemically modified with acrylate surface groups, which formed direct covalent linkages with the polymer matrix under light exposure. The composites with a 10% mass loading of the chemically modified BTO nanoparticles showed piezoelectric coefficients (<i>d</i><sub>33</sub>) of ∼40 pC/N, which were over 10 times larger than composites synthesized with unmodified BTO nanoparticles and over 2 times larger than composites containing unmodified BTO nanoparticles and carbon nanotubes to boost mechanical stress transfer efficiencies. These results not only provide a tool for fabricating 3D piezoelectric polymers but lay the groundwork for creating highly efficient piezoelectric polymer materials <i>via</i> nanointerfacial tuning