PIV investigation of the 3D instantaneous flow organization behind a micro-ramp in a supersonic boundary layer

The flow field resulting from a single micro-ramp in a Ma=2.0 supersonic boundary layer is investigated using tomographic particle image velocimetry (Tomo-PIV). The measurements were carried out within two volumes behind the micro-ramp. Mean flow characteristics are analyzed, evidence of the streamwise vortex pair is given. In the instantaneous flow, a Kelvin-Helmholtz (K-H) instability developing in the wake of the element is revealed, and the K-H vortices are further identified. A conceptual model is provided to describe the instantaneous flow organization generated by a single micro-ramp

A polarized beam splitter using an anisotropic medium slab

The propagation of electromagnetic waves in the anisotropic medium with a single-sheeted hyperboloid dispersion relation is investigated. It is found that in such an anisotropic medium E- and H-polarized waves have the same dispersion relation, while E- and H-polarized waves exhibit opposite amphoteric refraction characteristics. E- (or H-) polarized waves are positively refracted whereas H- (or E-) polarized waves are negatively refracted at the interface associated with the anisotropic medium. By suitably using the properties of anomalous refraction in the anisotropic medium it is possible to realize a very simple and very efficient beam splitter to route the light. It is shown that the splitting angle and the splitting distance between E- and H- polarized beam is the function of anisotropic parameters, incident angle and slab thickness.Comment: 14 pages, 6 figure

Effect of dimples on glancing shock wave turbulent boundary layer interactions

An experimental study has been conducted to examine the control effectiveness of dimples on the glancing shock wave turbulent boundary layer interaction produced by a series of hemi-cylindrically blunted fins at Mach numbers 0.8 and 1.4, and at angles of sweep 0°, 15°, 30° and 45°. Schlieren photography, oil flow, pressure sensitive paints, and pressure tappings were employed to examine the characteristics of the induced flow field. The passive control technique used a series of 2 mm diameter, 1 mm deep indents drilled across the hemi-cylindrical leading edge at angles 0°, 45° and 90°. The effects of dimples were highly dependent on their orientation relative to the leading edge apex, and the local boundary layer properties

A review of size and geometrical factors influencing resonant frequencies in metamaterials

Although metamaterials and so-called left-handed media have originated from theoretical considerations, it is only by their practical fabrication and the measurement of their properties that they have gained credibility and can fulfil the potential of their predicted properties. In this review we consider some of the more generally applicable fabrication methods and changes in geometry as they have progressed, exhibiting resonant frequencies ranging from radio waves to the visible optical region

Incipient Separation in Shock Wave Boundary Layer Interactions as Induced by Sharp Fin

The incipient separation induced by the shock wave turbulent boundary layer interaction at the sharp fin is the subject of present study. Existing theories for the prediction of incipient separation, such as those put forward by McCabe (1966) and Dou and Deng (1992), can have thus far only predicting the direction of surface streamline and tend to over-predict the incipient separation condition based on the Stanbrook's criterion. In this paper, the incipient separation is firstly predicted with Dou and Deng (1992)'s theory and then compared with Lu and Settles (1990)' experimental data. The physical mechanism of the incipient separation as induced by the shock wave/turbulent boundary layer interactions at sharp fin is explained via the surface flow pattern analysis. Furthermore, the reason for the observed discrepancy between the predicted and experimental incipient separation conditions is clarified. It is found that when the wall limiting streamlines behind the shock wave becomes\ aligning with one ray from the virtual origin as the strength of shock wave increases, the incipient separation line is formed at which the wall limiting streamline becomes perpendicular to the local pressure gradient. The formation of this incipient separation line is the beginning of the separation process. The effects of Reynolds number and the Mach number on incipient separation are also discussed. Finally, a correlation for the correction of the incipient separation angle as predicted by the theory is also given.Comment: 34 pages; 9 figure

Electric and Magnetic Excitation of Coherent Magnetic Plasmon Waves in a One-dimensional Meta-chain

A one-dimensional diatomic meta-chain with equal-size holes and different-length slits is designed. Broadband coherent magnetic plasmon waves (MPW) are formed in such a system, excited by both the electric resonance in the slits and the magnetic resonance in the holes in a wide range of incidence angles (00-400) and broad frequency bands (200-230 THz). The dispersion properties of the MPW measured in our experiments agree with the theoretical calculation based on the Lagrange model. The coherent MPWs reported in this paper may have applications in subwavelength integrated nanocircuits

Ab initio study of the volume dependence of dynamical and thermodynamical properties of silicon

Motivated by the negative thermal expansion observed for silicon between 20 K and 120 K, we present first an ab initio study of the volume dependence of interatomic force constants, phonon frequencies of TA(X) and TA(L) modes, and of the associated mode Gruneisen parameters. The influence of successive nearest neighbors shells is analysed. Analytical formulas, taking into account interactions up to second nearest neighbors, are developped for phonon frequencies of TA(X) and TA(L) modes and the corresponding mode Gruneisen parameters. We also analyze the volume and pressure dependence of various thermodynamic properties (specific heat, bulk modulus, thermal expansion), and point out the effect of the negative mode Gruneisen parameters of the acoustic branches on these properties. Finally, we present the evolution of the mean square atomic displacement and of the atomic temperature factor with the temperature for different volumes, for which the anomalous effects are even greater.Comment: 24 pages, Revtex 3.0, 11 figures, accepted for publication in Phys. Rev.

Procedures for listing loci and alleles of ruminants: 1991 proposals

The following procedures for listing loci in ruminants were proposed at the 1991 1st Workshop on Genetic Nomenclature of Farm Ruminants organised by COGNOSAG (Committee on Genetic Nomenclature of Sheep and Goats): identification of locus, genomic location, gene effect classification (24 entries), summary of alleles and, for each allele, after identification, phenotypic effect, inheritance and breeds implied. This set of procedures is intended for the first edition of the MIS, MIG and MIC catalogues (mendelian inheritance in sheep, goats and cattle, respectively) and is a basis for future data banking.Au cours du premier Atelier de Nomenclature Génétique des Ruminants de Ferme organisé par le COGOVICA (Comité de Nomenclature Génétique des Ovins et Caprins) en 1991, les procédures suivantes de listage des loci chez les Ruminants ont été proposées: identification du locus, localisation sur le génome, effet du gène (24 entrées), tableau des allèles et, pour chaque allèle, outre l’identification, l’effet phénotypique, l’hérédité et les races concernées. Conçue pour être utilisée dans la première édition des catalogues MIS, MIG et MIC (Mendelian Inheritance in Sheep, Goats and Cattle resp), cette grille peut servir de base pour une future banque de données