Modelling techniques for biological reaction systems: 1 Mathematical description and model representation

This paper is the first in a series of three which deals with modelling and numeric techniques for biological reaction systems. A matrix for­ ma rov1des a usef\11. method for model presentation. The matrix ensures clarity as to the compounds, processes, reaction terms and s01chio.metry compnsmg the model. It allows ready comparison of different models and facilitates incorporating the model in a computer slffiulauon program

Cohomology of preimages with local coefficients

Let M,N and B\subset N be compact smooth manifolds of dimensions n+k,n and \ell, respectively. Given a map f from M to N, we give homological conditions under which g^{-1}(B) has nontrivial cohomology (with local coefficients) for any map g homotopic to f. We also show that a certain cohomology class in H^j(N,N-B) is Poincare dual (with local coefficients) under f^* to the image of a corresponding class in H_{n+k-j}(f^{-1}(B)) when f is transverse to B. This generalizes a similar formula of D Gottlieb in the case of simple coefficients.Comment: This is the version published by Algebraic & Geometric Topology on 4 October 200

Design and control of equalization tanks.

Includes bibliography.The objective of this investigation was to develop a control strategy for the operation of an equalization tank upstream of a waste water treatment plant which utilizes the available equalization hold-up volume in such a manner that it reduces, optimally, diurnal fluctuations in both influent flow and load rates. The influent to a wastewater treatment plant generally exhibits wide diurnal variations in both flow rate and concentration, and consequently in load rate (defined as the product of flow rate and concentration). Deviations of these parameters from steady state cause plant operating problems in areas such as aeration control (due to load rate fluctuations) settling tank overloading due to flow rate fluctuations) and/or over- or under-aeration which affects settling properties, and others

Large pollen loads of a South African asclepiad do not interfere with the foraging behaviour or efficiency of pollinating honey bees

The pollen of asclepiads (Asclepiadoideae, Apocynaceae) and most orchids (Orchidaceae) are packaged as large aggregations known as pollinaria that are removed as entire units by pollinators. In some instances, individual pollinators may accumulate large loads of these pollinaria. We found that the primary pollinator of Cynanchum ellipticum (Apocynaceae-Asclepiadoideae), the honey bee Apis mellifera, accumulate very large agglomerations of pollinaria on their mouthparts when foraging on this species. We tested whether large pollinarium loads negatively affected the foraging behaviour and foraging efficiency of honey bees by slowing foraging speeds or causing honey bees to visit fewer flowers, and found no evidence to suggest that large pollinarium loads altered foraging behaviour. C. ellipticum displayed consistently high levels of pollination success and pollen transfer efficiency (PTE). This may be a consequence of efficiently loading large numbers of pollinaria onto pollinators even when primary points of attachment on pollinators are already occupied and doing so in a manner that does not impact the foraging behaviour of pollinating insects

Negative Pressure Wound Therapy for the Treatment of the Open Abdomen and Incidence of Enteral Fistulas: A Retrospective Bicentre Analysis

Introduction. The open abdomen (OA) is often associated with complications. It has been hypothesized that negative pressure wound therapy (NPWT) in the treatment of OA may provoke enteral fistulas. Therefore, we analyzed patients with OA and NPWT with special regard to the occurrence of intestinal fistulas. Methods. The present study included all consecutive patients with OA treated with NWPT from April 2010 to August 2011 in two hospitals. Patients’ demographics, indications for OA, risk factors, complications, outcome and incidence of fistulas before, during and after NPWT were recorded. Results. Of 81 patients with OA, 26 had pre-existing fistulas and 55 were free from a fistula at the beginning of NPWT. Nine of the 55 patients developed fistulas during () or after NPWT (). Seventy-five patients received ABThera therapy, 6 patients other temporary abdominal closure devices. Only diverticulitis seemed to be a significant predisposing factor for fistulas. Mortality was slightly lower for patients without fistulas. Conclusion. The present study revealed no correlation between occurrence of fistulas before, during, and after NWPT, with diverticulitis being the only risk factor. Fistula formation during NPWT was comparable to reports from literature. Prospective studies are mandatory to clarify the impact of NPWT on fistula formation

Pollination biology of Bergeranthus multiceps (Aizoaceae) with preliminary observations of repeated flower opening and closure

Little is known about pollination of the Aizoaceae (Mesembryanthemaceae). There are sparse reports of generalist pollination in the family by a variety of insects (predominantly bees). Furthermore, most species are self-incompatible in cultivation. In this study, observations were made on two populations of Bergeranthus multiceps (Salm-Dyck) Schwantes growing in the Eastern Cape province of South Africa. Insects visiting the flowers were collected and examined for pollen. While 79 individual insects (in 24 genera representing 14 families and four orders) were collected visiting the flowers, the majority (43 individuals) were female Allodapula variegata bees (Apidae, subfamily Xylocopinae, tribe Allodapini)collecting pollen. All other bee visitors were also female, suggesting pollen collection as the primary activity at the flowers. The protandrous flowers were found to be self-incompatible, pointing to the importance of bee-mediated xenogamy in this species. The flowers of B. multiceps are bright yellow in the human visual spectrum. In addition, the petals of this species reflect ultraviolet light. In contrast, the yellow anthers absorb UV. Flower opening and closing is common in the Aizoaceae. Interestingly, in B. multiceps flowers open at about 15:30 and remain open for approximately three hours before closing again in the late afternoon. These afternoon flower opening events were found to be closely correlated to ambient temperatures above 23°C, relative humidity lower than 50% and vapour pressure deficit below 1.05 kPa measured from as early as 09:00 on the days when flowers opened

Mechanisms for Reduced Excess Sludge Production in the Cannibal Process

Reducing excess sludge production is increasingly attractive as a result of rising costs and constraints with respect to sludge treatment and disposal. A technology in which the mechanisms remain not well understood is the Cannibal process, for which very low sludge yields have been reported. The objective of this work was to use modeling as a means to characterize excess sludge production at a full-scale Cannibal facility by providing a long sludge retention time and removing trash and grit by physical processes. The facility was characterized by using its historical data, from discussion with the staff and by conducting a sampling campaign to prepare a solids inventory and an overall mass balance. At the evaluated sludge retention time of 400 days, the sum of the daily loss of suspended solids to the effluent and of the waste activated sludge solids contributed approximately equally to the sum of solids that are wasted daily as trash and grit from the solids separation module. The overall sludge production was estimated to be 0.14 g total suspended solids produced/g chemical oxygen demand removed. The essential functions of the Cannibal process for the reduction of sludge production appear to be to remove trash and grit from the sludge by physical processes of microscreening and hydrocycloning, respectively, and to provide a long sludge retention time, which allows the slow degradation of the “unbiodegradable” influent particulate organics (XU,Inf) and the endogenous residue (XE). The high energy demand of 1.6 kWh/m3 of treated wastewater at the studied facility limits the niche of the Cannibal process to small- to medium-sized facilities in which sludge disposal costs are high but electricity costs are low

Influence of Slim Rod Material Properties to the Siemens Feed Rod and the Float Zone Process

AbstractThe identification and understanding of material properties influencing the float zone process is important to crystallize high purity silicon for high efficiency solar cells. Also the knowledge of minimal requirements to crystallize monocrystalline silicon with the float zone process is of interest from an economic point of view. In the present study, feed rods for the float zone process composed of a central slim rod and the deposited silicon from the Siemens process are investigated. Previous studies have shown that the slim rod has a significant impact on the purity and suitability for further crystallization processes. In particular, contaminations like substitutional carbon and the presence of precipitates as well as the formation of oxide layers play an important role and are investigated in detail. For this purpose different slim rod materials were used in deposition and float zone crystallization experiments. Samples were prepared by cross sectioning and core drilling of Siemens rods, which were recrystallized with the float zone process. Recrystallized drilled cores are analyzed with FT-IR spectrometry concerning the carbon and oxygen content. To estimate the grain growth behavior on the slim rod surface in dependence of the used slim rod material, EBSD mappings inside a SEM are performed on squared and circular slim rods. TEM analysis was used to investigate the presence of an oxide layer at the interface between slim rod and deposited polycrystalline silicon. Additionally the influence of a nitrogen-containing gas atmosphere during the slim rod pulling is investigated by IR microscopy and ToF-SIMS regarding Si3N4 precipitation

Magnetic Damping of Solid Solution Semiconductor Alloys

The objective of this study is to: (1) experimentally test the validity of the modeling predictions applicable to the magnetic damping of convective flows in electrically conductive melts as this applies to the bulk growth of solid solution semiconducting materials; and (2) assess the effectiveness of steady magnetic fields in reducing the fluid flows occurring in these materials during processing. To achieve the objectives of this investigation, we are carrying out a comprehensive program in the Bridgman and floating-zone configurations using the solid solution alloy system Ge-Si. This alloy system has been studied extensively in environments that have not simultaneously included both low gravity and an applied magnetic field. Also, all compositions have a high electrical conductivity, and the materials parameters permit reasonable growth rates. An important supporting investigation is determining the role, if any, that thermoelectromagnetic convection (TEMC) plays during growth of these materials in a magnetic field. TEMC has significant implications for the deployment of a Magnetic Damping Furnace in space. This effect will be especially important in solid solutions where the growth interface is, in general, neither isothermal nor isoconcentrational. It could be important in single melting point materials, also, if faceting takes place producing a non-isothermal interface. In conclusion, magnetic fields up to 5 Tesla are sufficient to eliminate time-dependent convection in silicon floating zones and possibly Bridgman growth of Ge-Si alloys. In both cases, steady convection appears to be more significant for mass transport than diffusion, even at 5 Tesla in the geometries used here. These results are corroborated in both growth configurations by calculations

Negative Pressure Wound Therapy for the Treatment of the Open Abdomen and Incidence of Enteral Fistulas: A Retrospective Bicentre Analysis

Introduction. The open abdomen (OA) is often associated with complications. It has been hypothesized that negative pressure wound therapy (NPWT) in the treatment of OA may provoke enteral fistulas. Therefore, we analyzed patients with OA and NPWT with special regard to the occurrence of intestinal fistulas. Methods. The present study included all consecutive patients with OA treated with NWPT from April 2010 to August 2011 in two hospitals. Patients' demographics, indications for OA, risk factors, complications, outcome and incidence of fistulas before, during and after NPWT were recorded. Results. Of 81 patients with OA, 26 had pre-existing fistulas and 55 were free from a fistula at the beginning of NPWT. Nine of the 55 patients developed fistulas during ( = 5) or after NPWT ( = 4). Seventy-five patients received ABThera therapy, 6 patients other temporary abdominal closure devices. Only diverticulitis seemed to be a significant predisposing factor for fistulas. Mortality was slightly lower for patients without fistulas. Conclusion. The present study revealed no correlation between occurrence of fistulas before, during, and after NWPT, with diverticulitis being the only risk factor. Fistula formation during NPWT was comparable to reports from literature. Prospective studies are mandatory to clarify the impact of NPWT on fistula formation