91 research outputs found
Recommended from our members
Heat transfer enhancement with gas-to-gas micro heat exchangers
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.A characterization of gas-to-gas micro heat exchangers has been performed in terms of pressure
drop behavior and heat transfer performance. The gas-to-gas micro heat exchangers differ by partition wall
material, partition wall thickness and flow arrangement. The pressure drop behavior has been analyzed due
to the pressure losses in different sections of the gas-to-gas micro heat exchangers. Increased pressure losses
in front of and behind the micro channels have been detected due to modified geometries in the inlet and
outlet distribution chambers. The heat transfer performance has been determined in terms of thermal
effectiveness. The comparison among different partition wall materials and partition wall thicknesses showed
no significant criteria of the influence of thermal conductivity on the thermal effectiveness. An assessment
due to an overall heat exchanger effectiveness has been performed to compare the gas-to-gas micro heat
exchangers. For this purpose, the overall exergy loss has been calculated by combination of thermal
effectiveness and pressure losses. A strong impact of the exergy loss due to pressure drop has been detected
which influences the overall exergy loss of the gas-to-gas micro heat exchangers
Recommended from our members
Experimental design with integrated temperature sensors in MEMS: an example of application for rarefied gases
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.This paper presents a new MEMS experimental device with integrated temperature sensors.
Conventional silicon planar techniques for the fabrication of microelectronic sensors have been used to realize a particular layout, which does not limit the material of the microstructures it can be used with. The study of rarefied gases has been chosen as case study for the validation of the local measuring system. In this work the attention will be focused on the description of the sensor functioning principles and on the presentation of the preliminary results obtained during the calibration procedures. The tests showed promising results for a future development of the sensor design.The European Community’s Seventh Framework Program (FP7/2007-20013) under grant agreement no 215504
Intermetallic GaPd Thin Films for Selective Hydrogenation of Acetylene
The preparation of single‐phase and catalytically active GaPd2 coatings was accomplished via DC magnetron sputtering using an intermetallic sputter target. Thin and uniform layers were deposited on borosilicate glass, Si(111) and planar as well as micro‐structured stainless steel foils. The specimens were examined regarding their phase composition, film morphology and microstructure. Thin films of different layer thickness were catalytically characterized in the semi‐hydrogenation of acetylene, which was conducted at 473 K and a feed gas composition of 0.5 vol.% C2H2, 5 vol.% H2 as well as 50 vol.% C2H4 in helium. Pre‐reduction of the catalyst was found to be essential to enhance the catalytic selectivity. Sputtered GaPd2 showed a high selectivity of 73 % for the hydrogenation to ethylene at conversion levels above 80 %. The surface‐specific activity was strongly increased to 8.97 molacetylene· (A 0· h)–1 compared to bulk‐ or nanoscale GaPd2 (1.93 and 0.30 molacetylene· (A 0· h)–1, respectively) caused by the high specific surface area of the thin films
Recommended from our members
Residence time distribution of gas flows in microreactors: Measurement and model comparison
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The optimization of microreactor designs for applications in chemical process engineering usually requires knowledge of the residence time distribution (RTD). The applicability of established models to microstructured reactors is currently under debate (Bošković et al. 2008, Günther et al. 2004, Stief et al. 2008). This work provides new experimental data on the residence time distributions of gas flows through different types of microstructured reactors and analyses the data with established RTD models. By this, the dispersion model was found to describe the RTD behavior of gas flow for a majority of the microstructured devices tested. The model could therefore be used to predict the RTD of those reactors.German Federal Ministry of Economics
and Technology (IGF Project 15495
Simulation of Fluid Flow During Direct Synthesis of HO in a Microstructured Membrane Reactor
A microstructured membrane reactor has been developed to overcome the safety and productivity challenge of the direct synthesis of hydrogen peroxide. A single membrane is employed for separate, continuous dosage of the gaseous reactants hydrogen and oxygen to the solid catalyst present in the aqueous solvent. Using a custom OpenFOAM® model, the impact of catalyst‐coated static mixers with different mixer geometries is studied. It is demonstrated that the custom fluid guiding elements outperform the investigated commercial static mixer under the flow conditions relevant to this application
Future Challenges in Heterogeneous Catalysis: Understanding Catalysts under Dynamic Reaction Conditions
In the future, (electro-)chemical catalysts will have to be more tolerant towards a varying supply of energy and raw materials. This is mainly due to the fluctuating nature of renewable energies. For example, power-to-chemical processes require a shift from steady-state operation towards operation under dynamic reaction conditions. This brings along a number of demands for the design of both catalysts and reactors, because it is well-known that the structure of catalysts is very dynamic. However, in-depth studies of catalysts and catalytic reactors under such transient conditions have only started recently. This requires studies and advances in the fields of 1) operando spectroscopy including time-resolved methods, 2) theory with predictive quality, 3) kinetic modelling, 4) design of catalysts by appropriate preparation concepts, and 5) novel/modular reactor designs. An intensive exchange between these scientific disciplines will enable a substantial gain of fundamental knowledge which is urgently required. This concept article highlights recent developments, challenges, and future directions for understanding catalysts under dynamic reaction conditions
- …