612 research outputs found

    Water extract of Cryphaea heteromalla (Hedw.) D. Mohr bryophyte as a natural powerful source of biologically active compounds

    Get PDF
    Bryophytes comprise of the mosses, liverworts, and hornworts. Cryphaea heteromalla, (Hedw.) D. Mohr, is a non-vascular lower plant belonging to mosses group. To the date, the most chemically characterized species belong to the liverworts, while only 3.2% and 8.8% of the species belonging to the mosses and hornworts, respectively, have been investigated. In this work, we present Folin–Ciocalteu and oxygen radical absorbance capacity (ORAC) data related to crude extracts of C. heteromalla obtained by three different extraction solvents: pure water (WT), methanol:water (80:20 v/v) (MET), and ethanol:water (80:20 v/v) (ETH). The water extract proved to be the best solvent showing the highest content of biophenols and the highest ORAC value. The C. heteromalla-WT extract was investigated by HPLC-TOF/MS (High Performance Liquid Chromatography-Time of Flight/Mass Spectrometry) allowing for the detection of 14 compounds, five of which were phenolic compounds, derivatives of benzoic, caffeic, and coumaric acids. Moreover, the C. heteromalla WT extract showed a protective effect against reactive oxygen species (ROS) generation induced by tert-butyl hydroperoxide (TBH) on the murine NIH-3T3 fibroblast cell line

    SICILIAN NATURALISTIC NEWS: 11 Aclista alticollis; 12 Mycomya (Mycomya) prominens; 13 Empis (Leptempis) confusa; 14 Sciapus platypterus; 15 Myopa picta; 16 Diaea dorsata; 17 Franklinothrips megalops; 18 Dasyhelea bilineata; 19 Forcipomyia (Synthridomyia) murina; 20 Forcipomyia (Euprojoannisia) psilonota; 21 Incertana drepanensis

    Get PDF
    SICILIAN NATURALISTIC NEWS: 11 Aclista alticollis; 12 Mycomya (Mycomya) prominens; 13 Empis (Leptempis) confusa; 14 Sciapus platypterus; 15 Myopa picta; 16 Diaea dorsata; 17 Franklinothrips megalops; 18 Dasyhelea bilineata; 19 Forcipomyia (Synthridomyia) murina; 20 Forcipomyia (Euprojoannisia) psilonota; 21 Incertana drepanensi

    Agarose/Îş-carrageenan-based hydrogel film enriched with natural plant extracts for the treatment of cutaneous wounds

    Get PDF
    Hydrogels for complex and chronic wound dressings must be conformable, absorb and retain wound exudates and maintain hydration. They can incorporate and release bioactive molecules that can accelerate the healing process. Wound dressings have to be in contact with the wound and epidermis, even for long periods, without causing adverse effects. Hydrogel dressing formulations based on biopolymers derived from terrestrial or marine flora can be relatively inexpensive and well tolerated. In the present article hydrogel films composed by agarose (1.0 wt%), Îş-carrageenan at three different concentrations (0.5, 1.0 and 1.5 wt%) and glycerol (3.0 wt%) were prepared without recourse to crosslinking agents, and characterized for their mechanical properties, morphology, swelling and erosion behavior. The films resulted highly elastic and able to absorb and retain large amounts of fluids without losing their integrity. One of the films was loaded with the aqueous extract from Cryphaea heteromalla (Hedw.) D. Mohr for its antioxidant properties. Absence of cytotoxicity and ability to reduce the oxidative stress were demonstrated on NIH-3T3 fibroblast cell cultures. These results encourage further biological evaluations to assess their impact on the healing process

    Hydrogel scaffolds based on k-Carrageenan/xyloglucan blends to host spheroids from human adipose stem cells

    Get PDF
    Hydrogels are water-swollen networks of hydrophilic polymer. They can be fabricated in various shapes and swell in water or aqueous solutions maintaining their original shape or undergo progressive erosion; can exibit large volume phase transitions with the change of one environmental parameter (stimuli-responsivness), shock absorption and low sliding friction properties (1). The morphology and mechanical properties of hydrogels are strongly affected by the network composition, the nature and degree of crosslinking and the degree of swelling. Indeed, when hydrogels are designed as scaffolds for human tissues remodeling, they must have sufficient mechanical integrity to provide support to the cells from the time of implantation to the completion of the process. The large amount of water present in the hydrogels and its microscopic pores interconnectivity allows transportation of nutrients, oxygen and metabolites, that ensures cells viability, and permits cells migration and scaffold colonization. The polymeric network can immobilize biomolecules that may affect cells growth or differentiation, control drug release profiles and enzymatic degradation (2,3). The combination of two hydrogelforming polymers with different chemistries and crosslinking densities can be used to tailor the morphology, mechanical strength and toughness of the scaffold to meet specific requirements (1). This work investigates the physico-chemical, morphological and mechanical properties of hydrogels formed by the blend of two polysaccharides, k-Carrageenan (k-C) and Degalactosylated Xyloglucan (Deg-XG) undergoing salt-induced and temperature-induced solgel transition, respectively. It also studies the compatibility of the two biopolymers with spheroids from adipose-derived stem cells (S-ASCs) in the prospect of developing instructive scaffolds for use in regenerative medicine

    Assembly of a high-resolution map of the Acadian Usher syndrome region and localization of the nuclear EF-hand acidic gene

    Get PDF
    Usher syndrome type 1C (USH1C) occurs in a small population of Acadian descendants from southwestern Louisiana. Linkage and linkage disequilibrium analyses localize USH1C to chromosome 11p between markers D11S1397 and D11S1888, an interval of less than 680 kb. Here, we refine the USH1C linkage to a region less than 400 kb, between genetic markers D11S1397 and D11S1890. Using 17 genetic markers from this interval, we have isolated a contiguous set of 60 bacterial artificial chromosomes (BACs) that span the USH1C critical region. Exon trapping of BAC clones from this region resulted in the recovery of an exon of the nuclear EF-hand acidic (NEFA) gene. However, DNA sequence analysis of the NEFA cDNA from lymphocytes of affected individuals provided no evidence of mutation, making structural mutations in the NEFA protein unlikely as the cellular cause of Acadian Usher syndrome. Copyright (C) 1998 Elsevier Science B.V

    Commissioning Status of the Fritz Haber Institute THz FEL

    No full text
    The THz Free-Electron Laser (FEL) at the Fritz Haber Institute (FHI) of the Max Planck Society in Berlin is designed to deliver radiation from 3 to 300 microns using a single-plane-focusing mid-IR undulator and a two-plane-focusing far-IR undulator that acts as a waveguide for the optical mode. A key aspect of the accelerator performance is the low longitudinal emittance, < 50 keV-psec, that is specified to be delivered at 200 pC bunch charge and 50 MeV from a gridded thermionic electron source. We utilize twin accelerating structures separated by a chicane to deliver the required performance over the < 20 - 50 MeV energy range. The first structure operates at near fixed field while the second structure controls the output energy, which, under some conditions, requires running in a decelerating mode. "First Light" is targeted for the centennial of the sponsor in October 2011 and we will describe progress in the commissioning of this device to achieve this goal. Specifically, the measured performance of the accelerated electron beam will be compared to design simulations and the observed matching of the beam to the mid-IR wiggler will be described

    Status of the Fritz Haber Institute THz FEL

    No full text
    The THz FEL at the Fritz Haber Institute (FHI) in Berlin is designed to deliver radiation from 4 to 400 microns. A single-plane-focusing undulator combined with a 5.4 m long cavity is used is the mid-IR (< 50 micron), while a two-plane-focusing undulator in combination with a 7.2 m long cavity with a 1-d waveguide for the optical mode is used for the far-IR. A key aspect of the accelerator performance is low longitudinal emittance, < 50 keV-psec, at 200 pC bunch charge and 50 MeV from a gridded thermionic electron source. We utilize twin accelerating structures separated by a chicane to deliver the required performance over the < 20 - 50 MeV energy range. The first structure operates at near fixed field while the second structure controls the output energy, which, under some conditions, requires running in a decelerating mode. "First Light" is targeted for the centennial of the FHI in October 2011 and we will describe progress in the commissioning of this device. Specifically, the measured performance of the accelerated electron beam will be compared to design simulations and the observed matching of the beam to the mid-IR wiggler will be described
    • …
    corecore