Microlens arrays with adjustable aspect ratio fabricated by electrowetting and their application to correlated color temperature tunable light-emitting diodes

We develop a facile, fast, and cost-effective method based on the electrowetting effect to fabricate concave microlens arrays (MLA) with a tunable height-to-radius ratio, namely aspect ratio (AR). The electric parameters including voltage and frequency are demonstrated to play an important role in the MLA forming process. With the optimized frequency of 5 Hz, the AR of MLA are tuned from 0.057 to 0.693 for an increasing voltage from 0 V to 180 V. The optical properties of the MLA, including their transmittance and light diffusion capability, are investigated by spectroscopic measurements and ray-tracing simulations. We show that the overall transmittance can be maintained above around 90% over the whole visible range, and that an AR exceeding 0.366 is required to sufficiently broaden the transmitted light angular distribution. These properties enable to apply the developed MLA films to correlated-color-temperature (CCT)-tunable light-emitting-diodes (LEDs) to enhance their angular color uniformity (ACU). Our results show that the ACU of CCT-tunable LEDs is significantly improved while preserving almost the same lumen output, and that the MLA with the highest AR exhibits the best ACU performance

Direct Conversion of Mouse Astrocytes Into Neural Progenitor Cells and Specific Lineages of Neurons

Background: Cell replacement therapy has been envisioned as a promising treatment for neurodegenerative diseases. Due to the ethical concerns of ESCs-derived neural progenitor cells (NPCs) and tumorigenic potential of iPSCs, reprogramming of somatic cells directly into multipotent NPCs has emerged as a preferred approach for cell transplantation. Methods: Mouse astrocytes were reprogrammed into NPCs by the overexpression of transcription factors (TFs) Foxg1, Sox2, and Brn2. The generation of subtypes of neurons was directed by the force expression of cell-type specific TFs Lhx8 or Foxa2/Lmx1a. Results: Astrocyte-derived induced NPCs (AiNPCs) share high similarities, including the expression of NPC-specific genes, DNA methylation patterns, the ability to proliferate and differentiate, with the wild type NPCs. The AiNPCs are committed to the forebrain identity and predominantly differentiated into glutamatergic and GABAergic neuronal subtypes. Interestingly, additional overexpression of TFs Lhx8 and Foxa2/Lmx1a in AiNPCs promoted cholinergic and dopaminergic neuronal differentiation, respectively. Conclusions: Our studies suggest that astrocytes can be converted into AiNPCs and lineage-committed AiNPCs can acquire differentiation potential of other lineages through forced expression of specific TFs. Understanding the impact of the TF sets on the reprogramming and differentiation into specific lineages of neurons will provide valuable strategies for astrocyte-based cell therapy in neurodegenerative diseases

The Synthesis and Initial Evaluation of MerTK Targeted PET Agents

MerTK (Mer tyrosine kinase), a receptor tyrosine kinase, is ectopically or aberrantly expressed in numerous human hematologic and solid malignancies. Although a variety of MerTK targeting therapies are being developed to enhance outcomes for patients with various cancers, the sensitivity of tumors to MerTK suppression may not be uniform due to the heterogeneity of solid tumors and different tumor stages. In this report, we develop a series of radiolabeled agents as potential MerTK PET (positron emission tomography) agents. In our initial in vivo evaluation, [18F]-MerTK-6 showed prominent uptake rate (4.79 ± 0.24%ID/g) in B16F10 tumor-bearing mice. The tumor to muscle ratio reached 1.86 and 3.09 at 0.5 and 2 h post-injection, respectively. In summary, [18F]-MerTK-6 is a promising PET agent for MerTK imaging and is worth further evaluation in future studies

Demand for Long-Term Care Insurance in China

The aim of this study was to estimate willingness to pay (WTP) for long-term care insurance (LTCI) and to explore the determinants of demand for LTCI in China. We collected data from a household survey conducted in Qinghai and Zhejiang on a sample of 1842 households. We relied on contingent valuation methods to elicit the demand for LTCI and random effects logistic regression to analyze the factors associated with the demand for LTCI. Complementarily, we used document analysis to compare the LTCI designed in this study and the current LTCI policies in the pilot cities. More than 90% of the respondents expressed their willingness to buy LTCI. The median WTP for LTCI was estimated at 370.14 RMB/year, accounting for 2.29% of average annual per capita disposable income. Price, age, education status, and income were significantly associated with demand for LTCI. Most pilot cities were found to mainly rely on Urban Employees Basic Medical Insurance funds as the financing source for LTCI. Considering that financing is one of the greatest challenges in the development of China’s LTCI, we suggest that policy makers consider individual contribution as an important and possible option as a source of financing for LTCI

Improvement in Color-Conversion Efficiency and Stability for Quantum-Dot-Based Light-Emitting Diodes Using a Blue Anti-Transmission Film

In this report, a blue anti-transmission film (BATF) has been introduced to improve the color-conversion efficiency (CCE) and the stability of quantum dot (QD) films. The results indicate that the CCE can be increased by as much as 93% using 15 layers of BATFs under the same QD concentration. Therefore, the same CCE can be achieved using BATF-QD hybrid films with a lower QD concentration when compared with standard QD films. The hybrid and QD films with the same CCE of 60% were aged at an environmental temperature of 25°C and with a 10 mA injection current light-emitting diode source. The CCE and luminous efficacy that are gained by the hybrid film increased by 42.8% and 24.5%, respectively, when compared with that gained by the QD film after aging for the same time period of approximately 65 h. In addition, the hybrid film can effectively suppress the red-shift phenomenon of the QD light spectra, as well as an expansion of the full-width at half maximum. Consequently, these BATF-QD hybrid films with excellent optical performance and stability show great potential for illumination and display applications

Scratch with double-tip tool: Crack behavior during simultaneous double scratch on BK7 glass

© 2020 Elsevier Ltd Over the past decade, successive double-scratch tests have been extensively performed to study the grinding mechanism of brittle materials. However, the grits sometimes interact with the surface simultaneously. In this study, double tips with a tip separation of 0.6–1.8 μm are fabricated by focused ion beam. Subsequently, double-scratch tests on BK7 optical glass are conducted using the double-tip scratch tool with a scratch depth of 200–600 nm. The typical crack system and its evolution mechanism for double-tip scratch are discovered, before being explained using an analytical stress model. The ductile–brittle transition and the material-removal mechanism are discussed. An influential radius for the interference between cracks and the stress field in the double scratch is obtained, which can serve as a reference for the design of textured grinding wheels. Subsequently, the advantages and disadvantages of double-tip scratches are discussed considering different applications, such as microstructure fabrication and grinding

Study of the Optical Properties of Multi-Particle Phosphors by the FDTD and Ray Tracing Combined Method

It is well known that the optical properties of multi-particle phosphor are crucial to the light performance of white light-emitting diodes (LEDs). Note that the optical properties including scattering or absorption properties for a single particle are easy to be calculated. However, due to the large computation considering the complicated re-scattering and re-absorption, it is difficult to calculate the scattering behaviors of the multi-particles. A common method to reduce the computation, which can cause unknown deviations, is to replace the multi-particle scattering properties by using the average scattering data of single particles. In this work, a cluster of multi-phosphor particles are directly simulated by the finite-difference time-domain (FDTD) method. The total scattering data of the cluster was processed as a bulk scattering parameter and imported to the Monte-Carlo ray-tracing (RT) method to realize a large-scale multi-particle scattering calculation. A polynomial mathematical model was built according to the multi-particle scattering data. An experiment was carried out for verifying the accuracy of the method in this work. The mean absolute percentages of the previous method are 1.68, 2.06, and 1.22 times larger than the multi-particle method compared with the experimental curves, respectively