51 research outputs found
HARMONI- the Extremely Large Telescope first light integral field spectrograph: a novel control architecture to integrate the science instrument control system with that of adaptive optics
HARMONI at ELT: overview of the capabilities and expected performance of the ELT's first light, adaptive optics assisted integral field spectrograph.
Environmental design solutions for existing concrete flat roofs in low-cost housing to improve passive cooling in western Mexico
The development of real estate in Mexico has largely ruled out the comfort of users that focused on economic matters and made it difficult to make substantial progress in adopting measures to improve indoor environmental quality. Current research projects in Mexico found that roof construction in low-cost housing struggles to meet the requirements of the indoor climate. Passive cooling strategies are techniques to control heat gain and heat dissipation in buildings to maximise the comfort and health of building users while minimising energy use. Passive cooling systems recognize climate conditions and utilise renewable sources of energy such as the sun and wind to provide cooling and ventilation. Therefore, this study aims to develop a green and sustainable solution for existing concrete flat roofs with no major interventions and investments to save energy. The design of a passive device was tested to assess its effectiveness to protect flat roofs from shortwave radiation and to allow for heat dissipation in Mexican buildings. The study used a quantitative approach based on experiments and simulation tests to evaluate design efficiency. The results showed that a perforated device with an opening percentage of 88% and a cavity of 0.05m between the roof and the device provided effective protection. Also, the device with blinds of 45° showed lower operative temperatures within a range of mean values between 0.8°C and 0.9°C compared to a roof with a full shade cover in the hot and humid season. However, the perforated device with blinds of 90° in black colour delivered the best performance compared to other models and recorded a mean value of 1.13°C in the hot sub-humid season. The results revealed the efficiency of the proposed device that can be observed within different geometric configurations, surface properties as well as the use of the nocturnal radiative cooling potential in blocking solar radiation in Mexican buildings
Remote Sensing and In-situ Data Analysis for the Urban Heat Island and Land Surface Temperature in the Vertical Forest area (“Bosco Verticale”), in Milan city
The trend of urbanization nowadays has caused
a lot of changes that related to climate. One of the most
important issues is that of Urban Heat Island (UHI) and
occurs in major cities in worldwide scale. Surface urban heat
island (SUHI) and canopy urban heat island (CUHI) are the
most commonly studied UHI categories. The current study
was held during both spring and summer period of 2021, in
the city of Milan. The methodology includes in-situ
measurements and remote sensing techniques. For the
examination of CUHI effect, meteorological data were also
acquired from a nearby meteorological station. The outcomes
showed differences of in-situ measurements in terms of both
air temperature (Tair) and relative humidity (RH), by 3.8 oC
and by 7.6 % accordingly higher than that acquired from the
meteorological station. Concerning remote sensing, the results
showed that the root mean square error (RMSE) of surface
temperature concerning the downscaled values from MODIS
(1.000m) to Landsat8 (30m) found to be equal to 2.71 oC. On
the other hand, the downscaled values from MODIS to
Sentinlel-2 (10m) found to be equal to 3.42 o
Microclimate improvement through redesign of open urban areas with bioclimatic criteria in a city centre
Monitoring the effect of urban green areas on the heat island in Athens
The role of urban green areas in the microclimatic conditions of cities, during summer, is investigated in this paper through monitoring campaigns carried out at the National garden, at the city centre of Athens. Two types of investigations were carried out: i) a microscopic one that investigated the thermal conditions inside the Garden and the immediate surrounding urban area and ii) a macroscopic one that compared the temperature profile of the Garden with that of the greater city centre area. It was concluded that in microscopic level, the temperature profile inside the National Garden and the immediate surrounding urban area did not showed a clear evidence of the influence of the Garden and it was dependent on the characteristics of each location. In a macroscopic scale, the Garden was found cooler than the other monitored urban locations and temperature differences were mainly greater during the night, especially in streets with high building height to street width (H/W) ratio and low traffic, while in streets with high anthropogenic heat during the day, the biggest temperature differences were recorded during the day. © Springer Science+Business Media B.V. 2008
Investigation of the performance of a ventilated wall
The need for environmental friendly and energy efficient building design has stimulated the design of new facade technologies, including various configurations of double skin facades. This paper investigates the thermal performance of a ventilated wall, both for heating and cooling. A thermal analysis was carried out, paying special attention to the characterization of the heat convection resulting from the buoyancy–induced flow in the open air channel which proved to be a critical aspect of the ventilated wall's behaviour. An integrated thermal and air flow model for the entire system was developed. A model of the ventilated wall construction was developed with the ESP-r simulation program and checked against experimental data from a real-scale test cell facility. The thermal benefits of adding a radiant barrier layer were also investigated. The results showed that this layer was beneficial in terms of the energy performance of the construction. Also, the comparison between the experimental and simulation model results showed satisfactory levels of convergence with the exception of the night hours during the summer period. A sensitivity analysis was also undertaken in order to investigate the main factors and the extent of their effect on the temperature variation inside the ventilated facades
Multi-year application of the three-dimensional numerical generation of response factors (NGRF) method in the prediction of conductive temperatures in soil and passive cooling earth-contact components
A recently developed method named the three-dimensional numerical generation of response factors NGRF (Zoras and Kosmopoulos, 2009) was claimed to be fast, accurate and flexible as a result of incorporating elements of the response factor method into a finite volume technique based numerical model. The presented paper reports on the application of the NGRF method for the numerical prediction of temperatures within and around structural passive cooling components over multi-year temperature profiles. Once the numerical temperature response factors time series of an earth-contact component's grid node had been generated then its future thermal performance due to any surrounding temperature variation can be predicted fast and accurately. The NGRF method was, successfully, applied through an intermodel testing procedure to simulate soil and structural earth-contact passive cooling component temperatures for multiple years. © 2011 Elsevier Ltd
- …