Search for neutrinoless double beta decay with enriched 76Ge in Gran Sasso 1990-2003

The results of the HEIDELBERG-MOSCOW experiment which searches with 11 kg of enriched 76Ge for double beta decay in the GRAN Sasso underground laboratory are presented for the full running period August 1990 - May 2003. The duty cycle of the experiment was ~80%, the collected statistics is 71.7 kg y. The background achieved in the energy region of the Q value for double beta decay is 0.11 events/ kg y keV. The two-neutrino accompanied half-life is determined on the basis of more than 100 000 events. The confidence level for the neutrinoless signal has been improved to 4.2 sigma.Comment: 19 pages, latex, 9 figures, 2 table

Performance Analysis of Hardware Barrier Synchronization

Synchronization among cooperating processors is a critical issue in the performance of high speed multiprocessors. For current Multiple Instruction stream Multiple Data stream (MIMD) computers synchronization cost is high. Hence, these architectures can execute only large granularity parallelism efficiently. In this report we study a new hardware synchronization technique, known as a hardware barrier. Machines using this technique are known as barrier MIMDs. Analytic and simulation studies are employed to show that hardware barrier synchronization can outperform the more common directed synchronization techniques. Barrier synchronization can be viewed as a static synchronization mechanism similar to the implicit synchronization of Very Long Instruction Word architectures (VLIWs). We study two variations of hardware barrier synchronization previously developed, static and dynamic, and suggest a new hybrid approach

Experiments on a Tail-wheel Shimmy

Model tests on the "running belt" and tests with a full-scale tail wheel were made on a rotating drum as well as on a runway in order to investigate the causes of the undesirable shimmy phenomena frequently occurring on airplane tail wheels, and the means of avoiding them. The small model (scale 1:10) permitted simulation of the mass, moments of inertia, and fuselage stiffness of the airplane and determination of their influence on the shimmy, whereas by means of the larger model with pneumatic tires (scale 1:2) more accurate investigations were made on the tail wheel itself. The results of drum and road tests show good agreement with one another and with model values. Detailed investigations were made regarding the dependence of the shimmy tendency on trail, rolling speed, load, size of tires, ground friction,and inclination of the swivel axis; furthermore, regarding the influence of devices with restoring effect on the tail wheel, and the friction damping required for prevention of shimmy. Finally observations from slow-motion pictures are reported and conclusions drawn concerning the influence of tire deformation

Exceptional Points in a Microwave Billiard with Time-Reversal Invariance Violation

We report on the experimental study of an exceptional point (EP) in a dissipative microwave billiard with induced time-reversal invariance (T) violation. The associated two-state Hamiltonian is non-Hermitian and non-symmetric. It is determined experimentally on a narrow grid in a parameter plane around the EP. At the EP the size of T violation is given by the relative phase of the eigenvector components. The eigenvectors are adiabatically transported around the EP, whereupon they gather geometric phases and in addition geometric amplitudes different from unity

Altitude-Wind-Tunnel Investigation of the 19B-2, 19B-8 and 19XB-1 Jet- Propulsion Engines

Investigations were conducted in the Cleveland altitude wind tunnel to determine the performance and operational characteristics of the 19B-2, 19B-8, and 19XS-1 turbojet engines. One objective was to determine the effect of altitude, flight Mach number, and tail-pipe-nozzle area on the performance characteristics of the six-stage and ten-stage axial-flow compressors of the 19B-8 and 19XB-1 engines, respectively, The data were obtained over a range of simulated altitudes and flight Mach numbers. At each simulated flight condition the engine was run over its full operable range of speeds. Performance characteristics of the 19B-8 and 19XB-1 compressors for the range of operation obtainable in the turboJet-engine installation are presented. Compressor characteristics are presented as functions of air flow corrected to sea-level conditions, compressor Mach number, and compressor load coefficient. For the range of compressor operation investigated, changes in Reynolds number had no measurable effect on the relations among compressor Mach number, corrected air flow, compressor load coefficient, compressor pressure ratio, and compressor efficiency. The operating lines for the 19B-8 compressor lay on the low-air-flow side of the region of maximum compressor efficiency; the 19B-8 compressor operated at higher average pressure coefficients per stage and produced a lower over-all pressure ratio than did the 19XB-1 compressor

Hardware Barrier Synchronization: Static Barrier MIMD (SBM)

In this paper, we give the design, and performance analysis, of a new, highly efficient, synchronization mechanism called “Static Barrier MIMD” or “SBM.” Unlike traditional barrier synchronization, the proposed barriers are designed to facilitate the use of static (compile-time) code scheduling for eliminating some synchronizations. For this reason, our barrier hardware is more general than most hardware barrier mechanisms, allowing any subset of the processors to participate in each barrier. Since code scheduling typically operates on fine-grain parallelism, it is also vital that barriers be able to execute in a small number of clock ticks. The SBM is actually only one of two new classes of barrier machines proposed to facilitate static code scheduling; the other architecture is the “Dynamic Barrier MIMD,” or “DBM,” which is described in a companion paper1. The DBM differs from the SBM in that the DBM employs more complex hardware to make the system less dependent on the precision of the static analysis and code scheduling; for example, an SBM cannot efficiently manage simultaneous execution of independent parallel programs, whereas a DBM can

Loop Coalescing and Scheduling for Barrier MIMD Architectures

Barrier MIMDs are asynchronous Multiple Instruction stream Multiple Data stream architectures capable of parallel execution of variable execution time instructions and arbitrary control flow (e.g., while loops and calls); however, they differ from conventional MlMDs in that the need for run-time synchronization is significantly reduced. This work considers the problem of scheduling nested loop structures on a barrier MIMD. The basic approach employs loop coalescing, a technique for transforming a multiply-nested loop into a single loop. Loop coalescing is extended to nested triangular loops, in which inner loop bounds are functions of outer loop indices. Also, a more efficient scheme to generate the original loop indices from the coalesced index is proposed for the case of constant loop bounds. These results are general, and can be applied to extend previous work using loop coalescing techniques. We concentrate on using loop coalescing for scheduling barrier MIMDs, and show how previous work in loop transformations [Wol89], [Pol88] and linear scheduling theory [ShF88], rShO901 cart be applied to this problem

National Transonic Facility: A review of the operational plan

The proposed National Transonic Facility (NTF) operational plan is reviewed. The NTF will provide an aerodynamic test capability significantly exceeding that of other transonic regime wind tunnels now available. A limited number of academic research program that might use the NTF are suggested. It is concluded that the NTF operational plan is useful for management, technical, instrumentation, and model building techniques available in the specialized field of aerodynamic analysis and simulation. It is also suggested that NASA hold an annual conference to discuss wind tunnel research results and to report on developments that will further improve the utilization and cost effectiveness of the NTF and other wind tunnels