Assessment of landfill leachate biodegradability and treatability by means of allochthonous and autochthonous biomasses

The biodegradability and treatability of a young (3 years old) municipal landfill leachate was evaluated by means of chemical oxygen demand (COD) fractionation tests, based on respirometric techniques. The tests were performed using two different biomasses: one cultivated from the raw leachate (autochthonous biomass) and the other collected from a conventional municipal wastewater treatment plant after its acclimation to leachate (allochthonous biomass). The long term performances of the two biomasses were also studied. The results demonstrated that the amount of biodegradable COD in the leachate was strictly dependent on the biomass that was used to perform the fractionation tests. Using the autochthonous biomass, the amount of biodegradable organic substrate resulted in approximately 75% of the total COD, whereas it was close to 40% in the case of the allochthonous biomass, indicating the capacity of the autochthonous biomass to degrade a higher amount of organic compounds present in the leachate. The autochthonous biomass was characterized by higher biological activity and heterotrophic active fraction (14% vs 7%), whereas the activity of the allochthonous biomass was significantly affected by inhibitory compounds in the leachate, resulting in a lower respiration rate (SOUR = 13 mg O2 gVSS-1 h-1 vs 37 mg O2 gVSS-1 h-1). The long-term performance of the autochthonous and allochthonous biomasses indicated that the former was more suitable for the treatment of raw landfill leachate, ensuring higher removal performance towards the organic pollutants

Fouling mechanism elucidation in membrane bioreactors by bespoke physical cleaning

Cake layer deposition on a membrane surface can determine both external and internal membrane fouling through negatively affecting the total filtration resistance while exerting a positive effect as a pre-filter. Membranes are usually subjected to a periodic cake layer removal through routine physical cleaning, specifically permeate backwashing of hollow fiber membranes, or enhanced cleaning through, for example, chemically-enhanced backwashing. Physical cake layer removal is crucial for sustaining permeability, yet the effect of different physical cleaning modes remains poorly evaluated. The present work attempts to analyze physical cake layer removal through the application of specific cleaning methods and the impact of these on the subsequent resistance. The constituent contributions to the overall resistance are appraised by means of the Resistances In-Series model, with the aim of producing a robust protocol for quantifying these discrete contributors. The results, based in part on published data, show the proposed approach to reliably determine the relative contribution of the different resistance components to within 0.1 · 1012 m−1 across a range of different bench and pilot-scale plants, confirming the resilience of the method

Preliminary evaluation of biopolymers production by mixed microbial culture from citrus wastewater in a MBR system using respirometric techniques

This preliminary study was aimed at evaluating the feasibility to produce biopolymers (BP) from citrus wastewater by mixed microbial culture in an anaerobic/aerobic membrane bioreactor (A/O-MBR). The activated sludge of the A/O-MBR was successfully enriched in microorganisms having a good capacity in producing intracellular biopolymers. The production of BP was found to be about 0.55 mgCOD mgCOD−1 using pure acetate at a concentration of 1000 mgCOD L−1. When using fermented wastewater, the conversion of acetate into BP product was 0.56 mgCOD mgCOD−1 in the test performed with C/N equal to 1000:1, whereas it was only 0.12 mgCOD mgCOD−1 in the test with C/N of 100:5. The results achieved suggested the feasibility to use citrus wastewater as a feedstock for biopolymers production although the low biomass storage capacity (0.26 mgCOD mgCODbiomass−1) suggested the need for optimizing the operating conditions in future studies

An innovative respirometric method to assess the autotrophic active fraction: Application to an alternate oxic-anoxic MBR pilot plant

An innovative respirometric method was applied to evaluate the autotrophic active fraction in an alternate anoxic/oxic membrane bioreactor (MBR) pilot plant. The alternate cycle (AC) produces a complex microbiological environment that allows the development of both autotrophic and heterotrophic species in one reactor. The present study aimed to evaluate autotrophic and heterotrophic active fractions and highlight the effect of different aeration/non aeration ratios in a AC-MBR pilot plant using respirometry. The results outlined that the autotrophic active fraction values were consistent with the nitrification efficiency and FISH analyses, which suggests its usefulness for estimating the nitrifying population. Intermittent aeration did not significantly affect the heterotrophic metabolic activity but significantly affected the autotrophic biomass development. Finally, the heterotrophic active biomass was strongly affected by the wastewater characteristics, whereas the resultant autotrophic biomass was considerably affected by the duration of the aerated phase

biogas from municipal solid waste landfills a simplified mathematical model

Abstract Municipal solid waste (MSW) landfills now represent one of the most important issues related to the waste management cycle. Knowledge of biogas production is a key aspect for the proper exploitation of this energy source, even in the post-closure period. In the present study, a simple mathematical model was proposed for the simulation of biogas production. The model is based on first-order biodegradation kinetics and also takes into account the temperature variation in time and depth as well as landfill settlement. The model was applied to an operating landfill located in Sicily, in Italy, and the first results obtained are promising. Indeed, the results showed a good fit between measured and simulated data. Based on these promising results, the model can also be considered a useful tool for landfill operators for a reliable estimate of the duration of the post-closure period

Influence of the Height of Municipal Solid Waste Landfill on the Formation of Perched Leachate Zones

Waste settlement as well as consolidation phenomena, which occur inside a landfill for municipal solid waste (MSW), can cause a decrease in waste permeability. This can lead to a reduction in conveyance of the leachate drainage system. It is therefore possible that a so-called perched leachate zone will form. Such a zone is constituted by an area in the body of the landfill where the leachate is temporarily trapped and is unable to infiltrate downward. This phenomenon is influenced by many factors, which include rain infiltration rate, waste moisture and composition, landfill height, and so on. The main aim of the paper is to elucidate the role played by landfill height in the formation of perched leachate zones using a one-dimensional (1D) mathematical model. The model allows for the simulation of the perco- lation fluxes throughout an MSW landfill based on mass-balance equations. The results showed a different response in terms of flow rates throughout the landfill, highlighting the important role of landfill height in the formation of perched leachate zones. Landfill height influences not only the formation of perched leachate zones but also their extension throughout the body of the landfill

MMP-2, MMP-9 and activin A blood levels in patients with breast cancer or prostate cancer metastatic to the bone.

Background: The clinical significance of the circulating levels of activin A and matrix metalloproteinase-2 (MMP-2) and -9 (MMP-9) was investigated in patients with breast cancer (BC) or prostate cancer (PC) with (M1) or without (M0) bone metastasis. Patients and Methods: MMP-2, MMP-9 and activin A blood concentrations were measured by enzyme immunoassays in 79 cancer patients and in 57 healthy blood donors (HS) who served as a control group. The diagnostic accuracy of these molecules to discriminate between M0 and M1 patients was evaluated by the receiver operating characteristic curve (ROC) and compared to that of tumor markers CA15.3 or prostate-specific antigen (PSA). Results: Activin A and MMP-2 were significantly increased in BC and PC patients as compared to sex-matched HS while MMP-9 levels were more elevated only in the PC patients. Interestingly, in the PC patients, activin A levels were significantly higher than those measured in the BC patients. In this latter group, activin A and CA15.3 but not MMP-2 or MMP-9 were increased in the M1 patients as compared to M0 patients. Furthermore, a significant relationship was also highlighted between activin A concentration and the number of bone metastases and tumor grade, between MMP-9 and tumor grade, and between MMP-2 and CA15.3. ROC curve analysis showed a good diagnostic accuracy for activin A and CA15.3 but a poor accuracy for MMP-2 and MMP-9 in discriminating between M0 and M1 patients. However, CA15.3 retained the best diagnostic accuracy in this respect. In the PC group, only activin A and PSA levels were significantly increased in the M1 patients as compared to the M0 patients. A similar although not statistically significant trend was noted for MMP-9. Interestingly, a significant correlation was observed between PSA and activin A and MMP-9, and between Activin A and Gleason score and the number of skeletal metastases. ROC curve analysis showed a good diagnostic accuracy for activin A, MMP-9 and PSA and a poor diagnostic accuracy for MMP-2 in detecting M1 patients. However, PSA showed the highest diagnostic accuracy. Conclusion: Activin A, MMP-2 and MMP-9 may be regarded as possible therapeutic targets in the treatment of metastatic bone disease. However, their usefulness as additional markers of bone metastasis remains to be better define

Plant Conservation Centres in Sicily: The ‘Valle Maria’ Regional Centre (Godrano, Palermo) and the case study of the rare Centaurea erycina (Asteraceae).

The role of the ‘Valle Maria’ Regional Centre and its activity in plant conservation thank to the collaboration with the University of Palermo, Dept. STEBICEF is discussed. The case study on propagation of Centaurea erycina, a narrow Sicilian endemic is presented

Treatment of high strength industrial wastewater with membrane bioreactors for water reuse: Effect of pre-treatment with aerobic granular sludge on system performance and fouling tendency

In this study, the treatment of citrus wastewater with membrane bioreactors (MBRs) under different configurations was investigated for water reuse. In particular, one MBR and one aerobic granular sludge MBR (AGS+MBR) bench scale plants were operated for 60 days. The experimental campaign was divided into two periods. In Phase I, a conventional hollow fiber MBR was employed for the treatment of the raw high strength wastewater, whereas in Phase II a combination of in-series reactors (AGS plus MBR) was adopted for the treatment of the high strength citrus wastewater The results demonstrated that both plant configurations enabled very high COD removal, with average values close to 99%. Respirometric batch tests revealed a considerable high metabolic activity of the biomass in both plant configurations, with higher values in the AGS+MBR. It was speculated that the MBR reactor enriched in active biomass deriving from the erosion of the external granule layers in the upstream reactor. In terms of fouling tendency, higher resistance to filtration was observed in the AGS+MBR plant, also characterized by higher irremovable resistance increase compared to the MBR plant that might severely affect the membrane service life

Biological stability assessment of MSW organic fractions by means of respirometric and germination tests

Composting is the mostly applied method for recovering the organic waste by producing an organic soil conditioner. Furthermore, the organic fraction of unsorted municipal solid waste (OFMSW) should be treated in mechanical biological treatment (MBT) plants in view of reducing its environmental impacts. In both cases, it is essential the assessment of biological stability as well as the phytotoxicity of the final product. The aim of this work was to evaluate the maturity evolution during the composting process of OFMSW at full scale. Samples were collected from two Sicilian (Italy) plants and were subjected to the following analytical measures: volatile solids (VS), dynamic respirometric index (DRI), carbon-to-nitrogen (C/N) ratio and germination index (GI). Results showed that some parameters such as pH and water content values can affect the respirometric test response and the proper activity of microorganisms responsible for biodegradation at full scale. For the unsorted waste, the DRI values suggested that depending on the initial values the stabilization duration might be increased prior to landfilling. DRI revealed to be effective for the assessment of the matrix stability, even if the simultaneous measurements of different indices can provide a reliable information of biological stability and maturity of the organic matrices