12 research outputs found
Double squirrel cage induction motors: a new approach to detect rotor bar failures
Peer Reviewe
Double squirrel cage induction motors: a new approach to detect rotor bar failures
Peer Reviewe
Double squirrel cage induction motors: a new approach to detect rotor bar failures
Peer Reviewe
FOC with Resolver Implementation for PMSM Drives by Using a Low Cost Atmel SAM3X8E Microcontroller
The aim of this paper is the low-cost experimental implementation of a field oriented control strategy for a Permanent Magnet Synchronous Motor (PMSM) by using an Atmel SAM3X8E microcontroller, mounted on an Arduino DUE board. In this electrical drive for PMSM, a resolver is used in order to measure the rotor position and speed: Therefore, the low-cost Arduino DUE performs not only FOC algorithm and phase currents data acquisition, but also a resolver-To-digital converter process, rotor position and speed data acquisition, and resolver signals management. The code has been implemented in the open source Arduino IDE, using C language, whereas the control and plot visualization interfaces have been developed by using an open source software. In order to make currents and resolver conditioning signals, a double-layer printed circuit board (PCB) has been created. The electrical drive has been experimentally tested and the main results reported in this work show high performance in terms of rotor speed response and compilation and execution speed of the code, validating the use of Arduino DUE for PMSM drives
Voltage source inverters: an easy approach for fast fault detection
Fault-tolerant converters have been widely investigated for years and nowadays an extensive technical literature on this field exists. This paper presents a novel fault detection algorithm based on a simple geometrical approach. In the algorithm analysis both the case of faults in single device and the loss of an entire inverter leg have been considered. The proposed methodology is characterized by simplicity, low computational and implementation effort with a consequent fast execution and easy control integration. The suggested algorithm is verified by means of experimental tests and reveals a valid and suitable alternative to the existing state of the art in the field of inverter fault detection
An exact method for the determination of differential leakage factors in electrical machines with non-symmetrical windings
An exact and simple method for the determination of differential leakage factors in polyphase ac electrical machines with non-symmetrical windings is presented in this paper. The method relies on the properties of G\uf6rges polygons that are used to transform an infinite series expressing the differential leakage factor into a finite sum in order to significantly simplify the calculations. Some examples are shown and discussed in order to practically demonstrate the effectiveness of the proposed method
Enhanced Modelling for Extended Performance Analysis of Interior Permanent Magnet Synchronous Machine Drive fed with Cascaded H-Bridges Multilevel Inverter
This paper presents a comparative simulation analysis of an Interior Permanent Magnet Synchronous Machine (IPMSM) performance once fed by a traditional three-phase two-level inverter and then using a three-phase five-level Cascaded H-Bridges Multilevel Inverter (CHBMI). For this purpose, an enhanced mathematical model of the IPMSM, that take into account simultaneously saturation, cross-coupling, spatial harmonics and iron loss effects, has been employed. Furthermore, two different PWM modulation strategies have been considered. The study was conducted for several working conditions, evaluating the impact of CHBMI adoption on the IPMSM performance in terms of improved efficiency and torque ripple reduction
Preliminary test on a cascode switch for high-frequency applications
Nowadays, an increasing electrification level is being addressed towards different sectors, such as transportation and industrial electronics. To bear that, high speed electrical machines represent a mature technology in different application fields, e.g. avionics, automotive, compressors and spindles. In order to guarantee high speed while keeping high power quality without adopting bulky filtering circuits, DC-AC converters shall be controlled by means of high Pulse Width Modulation (PWM) frequencies. In addition to the emerging switching device technologies, such as those based on Silicon-Carbide (SiC) and Gallium-Nitride (GaN), alternative circuital topologies are crucial in order to comply with the higher switching frequencies while maintaining high voltage levels. The Cascode (CC) structure represents an attractive topology for those applications. In this paper a three phase inverter based on CC devices is investigated, by simulating a 400 Hz sinusoidal PWM. Experimental results showing the satisfactory operation of a single-switch DC-AC implemented through a CC architecture are provided as well
Economic evaluation of PV system for EV charging stations: Comparison between matching maximum orientation and storage system employment
This article addresses the problem of the choice of a generation system to be implemented to reduce the impact of charging electric vehicles at University. Based on the behaviour of the student population, it is identified the electrical load. Two possible solutions are evaluated in order to manage the peak load: an orientation of the panels in order to increase the power at defined time and the use of storage system. The main strength and weakness points of two systems are investigated by taking into account the Levelized Cost of Energ