192 research outputs found
SLDV technology for measurement of mistuned bladed disc vibration
Bladed discs are very sensitive structures and the amplitude vibration of each
blade can vary significantly from blade to blade due to a series of factors such as
geometrical inhomogeneity between blades or material properties. These factors
lead to bladed disks mistuned thus the forced response amplitudes can be much
higher than the level predicted for a tuned assembly.
Designed models need to be “validate” to predict the response of a real bladed
disc within the tolerances set by the manufactures and this process is very
expensive as well as difficult. The validation process needs “reference data” as
fundamental input against what all predictions can be compared and validated.
Data that can be provided both under stationary conditions and under rotating
conditions and the latter is the most difficult to achieve, especially for bladed
disc assemblies which are very sensitive to any structural modification as it
could be attaching a transducer to measure vibrations. There are contact-less
measurement techniques available which, however, provide limited information
because they can measure only limited areas of the vibrating structures.
The aim of this study is to design measurement methods, using a standard
Scanning Laser Doppler Vibrometer (SLDV) and to integrate it into a software
platform which will be able to handle a series of measurement tasks both under
stationary and rotating conditions. The main contribution of this thesis is to
extend the use of Continuous Scanning LDV (CSLDV) to the rotating structures,
such as bladed discs, thus to perform synchronous measurements. Hence, a
bladed disc is needed to be designed to perform vibration predictions and
measurements and a mathematical model of the measurement test to control,
critically, all possible sources of errors involved in measurement under rotating conditions; all these to produce a robust measurement method. While the
primary focus is the measurement method, the study also extends to evaluation
of the sensitivity properties of the bladed disk test pieces that are the object of
the measurement tool
Damage initiation and structural degradation through resonance vibration:Application to composite laminates in fatigue
Response phase mapping of nonlinear joint dynamics using continuous scanning LDV measurement method
AIP PublishingInternational audienceThis study aims to present a novel work aimed at locating discrete nonlinearities in mechanical assemblies. The long term objective is to develop a new metric for detecting and locating nonlinearities using Scanning LDV systems (SLDV). This new metric will help to improve the modal updating, or validation, of mechanical assemblies presenting discrete and sparse nonlinearities. It is well established that SLDV systems can scan vibrating structures with high density of measurement points and produc e highly defined Operational Deflection Shapes (ODSs). This paper will present some insights on how to use response phase mapping for locating nonlinearities of a bolted flange. This type of structure presents two types of nonlinearities, which are geometr ical and frictional joints. The interest is focussed on the frictional joints and, therefore, the ability to locate which joint s are responsible for nonlinearity is seen highly valuable for the model validation activities
Vehicle Bridge Interaction – Extracting the dynamic characteristics of the non-stationary train passing phase
Calculating loads and life-time reduction of wind turbine gearbox and generator bearings due to shaft misalignment
- …