14 research outputs found
Recommended from our members
In Situ Heat-Induced Replacement of GaAs Nanowires by Au.
Here we report on the heat-induced solid-state replacement of GaAs by Au in nanowires. Such replacement of semiconductor nanowires by metals is envisioned as a method to achieve well-defined junctions within nanowires. To better understand the mechanisms and dynamics that govern the replacement reaction, we performed in situ heating studies using high-resolution scanning transmission electron microscopy. The dynamic evolution of the phase boundary was investigated, as well as the crystal structure and orientation of the different phases at reaction temperatures. In general, the replacement proceeds one GaAs(111) bilayer at a time, and no fixed epitaxial relation could be found between the two phases. The relative orientation of the phases affects the replacement dynamics and can induce growth twins in the Au nanowire phase. In the case of a limited Au supply, the metal phase can also become liquid.The Research Council of Norway is acknowledged for the support to the Norwegian Micro- and Nano-Fabrication Facility, NorFab (197411/V30), the FRINATEK program (214235), and the NORTEM project (197405). G.D. and C.D. acknowledge funding from ERC under Grant 259619 PHOTO EM. C.D. acknowledges financial support from the EU under Grant 312483 ESTEEM2
Direct Growth Of AlGaN nanorod LEDs on graphene-covered Si
High density of defects and stress owing to the lattice and thermal mismatch between nitride materials and heterogeneous substrates have always been important problems and limit the development of nitride materials. In this paper, AlGaN light-emitting diodes (LEDs) were grown directly on a single-layer graphene-covered Si (111) substrate by metal organic chemical vapor deposition (MOCVD) without a metal catalyst. The nanorods was nucleated by AlGaN nucleation islands with a 35% Al composition, and included n-AlGaN, 6 period of AlGaN multiple quantum wells (MQWs), and p-AlGaN. Scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) showed that the nanorods were vertically aligned and had an accordant orientation along the [0001] direction. The structure of AlGaN nanorod LEDs was investigated by scanning transmission electron microscopy (STEM). Raman measurements of graphene before and after MOCVD growth revealed the graphene could withstand the high temperature and ammonia atmosphere in MOCVD. Photoluminescence (PL) and cathodoluminescence (CL) characterized an emission at ~325 nm and demonstrated the low defects density in AlGaN nanorod LEDs
Direct Growth Of AlGaN nanorod LEDs on graphene-covered Si
High density of defects and stress owing to the lattice and thermal mismatch between nitride materials and heterogeneous substrates have always been important problems and limit the development of nitride materials. In this paper, AlGaN light-emitting diodes (LEDs) were grown directly on a single-layer graphene-covered Si (111) substrate by metal organic chemical vapor deposition (MOCVD) without a metal catalyst. The nanorods was nucleated by AlGaN nucleation islands with a 35% Al composition, and included n-AlGaN, 6 period of AlGaN multiple quantum wells (MQWs), and p-AlGaN. Scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) showed that the nanorods were vertically aligned and had an accordant orientation along the [0001] direction. The structure of AlGaN nanorod LEDs was investigated by scanning transmission electron microscopy (STEM). Raman measurements of graphene before and after MOCVD growth revealed the graphene could withstand the high temperature and ammonia atmosphere in MOCVD. Photoluminescence (PL) and cathodoluminescence (CL) characterized an emission at ~325 nm and demonstrated the low defects density in AlGaN nanorod LEDs
Self-catalyzed MBE grown GaAs/GaAsxSb1-x core-shell nanowires in ZB and WZ crystal structures
We have investigated the growth of self-catalyzed GaAs/GaAsxSb1-x core-shell nanowires directly on Si(111) substrates by molecular beam epitaxy. The compositions of the GaAsxSb1-x shells are tuned in a wide range where the Sb-content is varied from 10 to similar to 70%, covering the miscibility gap. In addition, the GaAsxSb1-x shells are grown on both zinc blende (ZB) and wurtzite (WZ) crystal structures. Morphological and structural characterizations of the grown nanowires indicate successful transfer of the GaAs core crystal structure to the GaAsxSb1-x shells for both ZB and WZ nanowires, with slower shell growth rate on the WZ segments
AlGaN Nanowires Grown on SiO2/Si (100) Using Graphene as a Buffer Layer
III-Nitride epitaxy is deeply dependent on the substrate and is difficult to grow on amorphous substrates because of the lattice mismatch limits. In this paper, graphene is employed as a buffer layer to assist AlGaN nanowire growth on the SiO2/Si (100) substrate using the metal–organic vapor phase epitaxy (MOVPE) technique. The influence of growth parameters such as reactor pressure, NH3 flow, and substrate temperature on the morphology of nanowires has been studied. In particular, it has been observed that AlGaN nanowires with hexagonal morphology can be achieved under lower reactor pressure and lower NH3 flow, while the tip morphology can be modified with the substrate temperature during nanowire growth. The nanowires grown here are studied using scanning and transmission electron microscopy, photoluminescence, and cathodoluminescence to characterize the structural and optical properties and demonstrate the high quality of the grown nanowires. These findings provide a novel way to grow nanowires on any crystalline or amorphous substrate using graphene as a buffer layer, promising for future device applications
Engineering parallel and perpendicular polarized photoluminescence from a single semiconductor nanowire by crystal phase control
We report on a crystal phase-dependent photoluminescence (PL) polarization effect in individual wurtzite GaAs nanowires with a zinc blende GaAsSb insert grown by Au-assisted molecular beam epitaxy. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the emission from the wurtzite GaAs nanowire is perpendicularly polarized. The results indicate that the crystal phases, through optical selection rules, are playing an important role in the alignment of the PL polarization in nanowires besides the linear polarization induced by the dielectric mismatch. The strong excitation power dependence and long recombination lifetimes (∼4 ns) from the wurtzite GaAs and zinc blende GaAsSb-related PL emission strongly indicate the existence of type II band alignments in the nanowire due to the presence of nanometer thin zinc blende segments and stacking faults in the wurtzite GaAs barrier. © 2010 American Chemical Society
New Insights into the Origins of Sb-Induced Effects on Self-Catalyzed GaAsSb Nanowire Arrays.
Ternary semiconductor nanowire arrays enable scalable fabrication of nano-optoelectronic devices with tunable bandgap. However, the lack of insight into the effects of the incorporation of Vy element results in lack of control on the growth of ternary III-V1-yVy nanowires and hinders the development of high-performance nanowire devices based on such ternaries. Here, we report on the origins of Sb-induced effects affecting the morphology and crystal structure of self-catalyzed GaAsSb nanowire arrays. The nanowire growth by molecular beam epitaxy is changed both kinetically and thermodynamically by the introduction of Sb. An anomalous decrease of the axial growth rate with increased Sb2 flux is found to be due to both the indirect kinetic influence via the Ga adatom diffusion induced catalyst geometry evolution and the direct composition modulation. From the fundamental growth analyses and the crystal phase evolution mechanism proposed in this Letter, the phase transition/stability in catalyst-assisted ternary III-V-V nanowire growth can be well explained. Wavelength tunability with good homogeneity of the optical emission from the self-catalyzed GaAsSb nanowire arrays with high crystal phase purity is demonstrated by only adjusting the Sb2 flux
Vertically Aligned GaAs Nanowires on Graphite and Few-Layer Graphene: Generic Model and Epitaxial Growth
By utilizing the reduced contact area of nanowires, we
show that
epitaxial growth of a broad range of semiconductors on graphene can
in principle be achieved. A generic atomic model is presented which
describes the epitaxial growth configurations applicable to all conventional
semiconductor materials. The model is experimentally verified by demonstrating
the growth of vertically aligned GaAs nanowires on graphite and few-layer
graphene by the self-catalyzed vapor–liquid–solid technique
using molecular beam epitaxy. A two-temperature growth strategy was
used to increase the nanowire density. Due to the self-catalyzed growth
technique used, the nanowires were found to have a regular hexagonal
cross-sectional shape, and are uniform in length and diameter. Electron
microscopy studies reveal an epitaxial relationship of the grown nanowires
with the underlying graphitic substrates. Two relative orientations
of the nanowire side-facets were observed, which is well explained
by the proposed atomic model. A prototype of a single GaAs nanowire
photodetector demonstrates a high-quality material. With GaAs being
a model system, as well as a very useful material for various optoelectronic
applications, we anticipate this particular GaAs nanowire/graphene
hybrid to be promising for flexible and low-cost solar cells