15 research outputs found
Human Occupancy as a Source of Indoor Airborne Bacteria
Exposure to specific airborne bacteria indoors is linked to infectious and noninfectious adverse health outcomes. However, the sources and origins of bacteria suspended in indoor air are not well understood. This study presents evidence for elevated concentrations of indoor airborne bacteria due to human occupancy, and investigates the sources of these bacteria. Samples were collected in a university classroom while occupied and when vacant. The total particle mass concentration, bacterial genome concentration, and bacterial phylogenetic populations were characterized in indoor, outdoor, and ventilation duct supply air, as well as in the dust of ventilation system filters and in floor dust. Occupancy increased the total aerosol mass and bacterial genome concentration in indoor air PM10 and PM2.5 size fractions, with an increase of nearly two orders of magnitude in airborne bacterial genome concentration in PM10. On a per mass basis, floor dust was enriched in bacterial genomes compared to airborne particles. Quantitative comparisons between bacterial populations in indoor air and potential sources suggest that resuspended floor dust is an important contributor to bacterial aerosol populations during occupancy. Experiments that controlled for resuspension from the floor implies that direct human shedding may also significantly impact the concentration of indoor airborne particles. The high content of bacteria specific to the skin, nostrils, and hair of humans found in indoor air and in floor dust indicates that floors are an important reservoir of human-associated bacteria, and that the direct particle shedding of desquamated skin cells and their subsequent resuspension strongly influenced the airborne bacteria population structure in this human-occupied environment. Inhalation exposure to microbes shed by other current or previous human occupants may occur in communal indoor environments
Accuracy, Precision, and Method Detection Limits of Quantitative PCR for Airborne Bacteria and Fungi â–¿
Real-time quantitative PCR (qPCR) for rapid and specific enumeration of microbial agents is finding increased use in aerosol science. The goal of this study was to determine qPCR accuracy, precision, and method detection limits (MDLs) within the context of indoor and ambient aerosol samples. Escherichia coli and Bacillus atrophaeus vegetative bacterial cells and Aspergillus fumigatus fungal spores loaded onto aerosol filters were considered. Efficiencies associated with recovery of DNA from aerosol filters were low, and excluding these efficiencies in quantitative analysis led to underestimating the true aerosol concentration by 10 to 24 times. Precision near detection limits ranged from a 28% to 79% coefficient of variation (COV) for the three test organisms, and the majority of this variation was due to instrument repeatability. Depending on the organism and sampling filter material, precision results suggest that qPCR is useful for determining dissimilarity between two samples only if the true differences are greater than 1.3 to 3.2 times (95% confidence level at n = 7 replicates). For MDLs, qPCR was able to produce a positive response with 99% confidence from the DNA of five B. atrophaeus cells and less than one A. fumigatus spore. Overall MDL values that included sample processing efficiencies ranged from 2,000 to 3,000 B. atrophaeus cells per filter and 10 to 25 A. fumigatus spores per filter. Applying the concepts of accuracy, precision, and MDL to qPCR aerosol measurements demonstrates that sample processing efficiencies must be accounted for in order to accurately estimate bioaerosol exposure, provides guidance on the necessary statistical rigor required to understand significant differences among separate aerosol samples, and prevents undetected (i.e., nonquantifiable) values for true aerosol concentrations that may be significant
Recommended from our members
Indoor emissions as a primary source of airborne allergenic fungal particles in classrooms.
This study quantifies the influence of ventilation and indoor emissions on concentrations and particle sizes of airborne indoor allergenic fungal taxa and further examines geographical variability, each of which may affect personal exposures to allergenic fungi. Quantitative PCR and multiplexed DNA sequencing were employed to count and identify allergenic fungal aerosol particles indoors and outdoors in seven school classrooms in four different countries. Quantitative diversity analysis was combined with building characterization and mass balance modeling to apportion source contributions of indoor allergenic airborne fungal particles. Mass balance calculations indicate that 70% of indoor fungal aerosol particles and 80% of airborne allergenic fungal taxa were associated with indoor emissions; on average, 81% of allergenic fungi from indoor sources originated from occupant-generated emissions. Principal coordinate analysis revealed geographical variations in fungal communities among sites in China, Europe, and North America (p < 0.05, analysis of similarity), demonstrating that geography may also affect personal exposures to allergenic fungi. Indoor emissions including those released with occupancy contribute more substantially to allergenic fungal exposures in classrooms sampled than do outdoor contributions from ventilation. The results suggest that design and maintenance of buildings to control indoor emissions may enable reduced indoor inhalation exposures to fungal allergens
Recommended from our members
Human occupancy as a source of indoor airborne bacteria.
Exposure to specific airborne bacteria indoors is linked to infectious and noninfectious adverse health outcomes. However, the sources and origins of bacteria suspended in indoor air are not well understood. This study presents evidence for elevated concentrations of indoor airborne bacteria due to human occupancy, and investigates the sources of these bacteria. Samples were collected in a university classroom while occupied and when vacant. The total particle mass concentration, bacterial genome concentration, and bacterial phylogenetic populations were characterized in indoor, outdoor, and ventilation duct supply air, as well as in the dust of ventilation system filters and in floor dust. Occupancy increased the total aerosol mass and bacterial genome concentration in indoor air PM(10) and PM(2.5) size fractions, with an increase of nearly two orders of magnitude in airborne bacterial genome concentration in PM(10). On a per mass basis, floor dust was enriched in bacterial genomes compared to airborne particles. Quantitative comparisons between bacterial populations in indoor air and potential sources suggest that resuspended floor dust is an important contributor to bacterial aerosol populations during occupancy. Experiments that controlled for resuspension from the floor implies that direct human shedding may also significantly impact the concentration of indoor airborne particles. The high content of bacteria specific to the skin, nostrils, and hair of humans found in indoor air and in floor dust indicates that floors are an important reservoir of human-associated bacteria, and that the direct particle shedding of desquamated skin cells and their subsequent resuspension strongly influenced the airborne bacteria population structure in this human-occupied environment. Inhalation exposure to microbes shed by other current or previous human occupants may occur in communal indoor environments
Indoor Emissions as a Primary Source of Airborne Allergenic Fungal Particles in Classrooms
This study quantifies the influence
of ventilation and indoor emissions
on concentrations and particle sizes of airborne indoor allergenic
fungal taxa and further examines geographical variability, each of
which may affect personal exposures to allergenic fungi. Quantitative
PCR and multiplexed DNA sequencing were employed to count and identify
allergenic fungal aerosol particles indoors and outdoors in seven
school classrooms in four different countries. Quantitative diversity
analysis was combined with building characterization and mass balance
modeling to apportion source contributions of indoor allergenic airborne
fungal particles. Mass balance calculations indicate that 70% of indoor
fungal aerosol particles and 80% of airborne allergenic fungal taxa
were associated with indoor emissions; on average, 81% of allergenic
fungi from indoor sources originated from occupant-generated emissions.
Principal coordinate analysis revealed geographical variations in
fungal communities among sites in China, Europe, and North America
(<i>p</i> < 0.05, analysis of similarity), demonstrating
that geography may also affect personal exposures to allergenic fungi.
Indoor emissions including those released with occupancy contribute
more substantially to allergenic fungal exposures in classrooms sampled
than do outdoor contributions from ventilation. The results suggest
that design and maintenance of buildings to control indoor emissions
may enable reduced indoor inhalation exposures to fungal allergens
The influence of floor dust resuspension and particle shedding on particle number concentrations of varying optical diameter.
<p>Plotted are the ratio of occupied indoor to simultaneous outdoor particle number concentrations for five size ranges from 0.3 µm to 10 µm under the following three conditions. Black bars represent the case of 30 people sitting on a carpeted floor that is covered with plastic sheeting (to prevent resuspension of floor dust). White bars represent one person walking on a carpeted floor covered with plastic sheeting. Gray bars represent one person walking on a carpeted floor (without plastic sheeting). Error bars indicate one standard error of the mean for replicate experiments. The experiment in which 30 people were sitting on a carpeted floor covered with plastic sheeting was conducted only once.</p
Enrichment of bacteria in airborne particulate matter and floor dust.
<p>Bacterial mass percentage (100×bacterial mass divided by total particle mass) in indoor air, outdoor air, and duct supply air samples and in the PM<sub>2.5</sub> and PM<sub>10</sub> size fraction of resuspended floor dust samples. Mass fractions were estimated assuming an average mass of 655 fg per bacterium <a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0034867#pone.0034867-Ilic1" target="_blank">[25]</a>. Box and whisker plots have the same interpretation as in <a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0034867#pone-0034867-g001" target="_blank">Figure 1</a>.</p