Analysis of the volatile components of five Turkish Rhododendron species by headspace solid-phase microextraction and GC-MS (HS-SPME-GC-MS)

Volatile constituents of various solvent extracts (n-hexane, CH2Cl2, H2O) of 15 different organs (leaves, flowers, fruits) of five Rhododendron species (Ericaceae) growing in Turkey were trapped with headspace solid-phase microextraction (HS-SPME) technique and analyzed by GC-MS. A total of 200 compounds were detected and identified from organic extracts, while the water extracts contained only traces of few volatiles. The CH2Cl2 extract of the R. luteum flowers was found to exhibit the most diverse composition: 34 compounds were identified, with benzyl alcohol (16.6%), limonene (14.6%) and p-cymene (8.4%) being the major compounds. The CH2Cl2-solubles of R. x sochadzeae leaves contained only phenyl ethyl alcohol. This study indicated appreciable intra-specific variations in volatile compositions within the genus. Different anatomical parts also showed altered volatile profiles. This is the first application of HS-SPME-GC-MS on the volatiles of Rhododendron species

Geometrical Optimization of Resonant Cantilevers Vibrating in In-Plane Bending Modes

The influence of the beam geometry on the quality factor and resonance frequency of resonant silicon cantilever beams vibrating in their fundamental in-plane flexural mode has been investigated in air and water. Compared to cantilevers vibrating in their out-of-plane flexural mode, utilizing the in plane mode results in reduced damping and reduced mass loading by the surrounding fluid. Quality factors as high as 4,300 in air and 67 in water have been measured for cantilevers with a 12 μm thick silicon layer. This is in comparison to Q factors up to 1,500 in air and up to 20 in water for cantilevers vibrating in their fundamental out-of-plane bending mode. Based on the experimental data, design guidelines are established for beam dimensions that ensure maximal Q-factors and minimal mass loading by the surrounding fluid

Liquid-Phase Chemical Sensing Using Lateral Mode Resonant Cantilevers

Liquid-phase operation of resonant cantilevers vibrating in an out-of-plane flexural mode has to date been limited by the considerable fluid damping and the resulting low quality factors (Q factors). To reduce fluid damping in liquids and to improve the detection limit for liquid-phase sensing applications, resonant cantilever transducers vibrating in their in-plane rather than their out-of-plane flexural resonant mode have been fabricated and shown to have Q factors up to 67 in water (up to 4300 in air). In the present work, resonant cantilevers, thermally excited in an in-plane flexural mode, are investigated and applied as sensors for volatile organic compounds in water. The cantilevers are fabricated using a complementary metal oxide semiconductor (CMOS) compatible fabrication process based on bulk micromachining. The devices were coated with chemically sensitive polymers allowing for analyte sorption into the polymer. Poly(isobutylene) (PIB) and poly(ethylene-co-propylene) (EPCO) were investigated as sensitive layers with seven different analytes screened with PIB and 12 analytes tested with EPCO. Analyte concentrations in the range of 1−100 ppm have been measured in the present experiments, and detection limits in the parts per billion concentration range have been estimated for the polymer-coated cantilevers exposed to volatile organics in water. These results demonstrate significantly improved sensing properties in liquids and indicate the potential of cantilever-type mass-sensitive chemical sensors operating in their in-plane rather than out-of-plane flexural modes