The electromagnetic modeling of thin apertures using the finite-difference time-domain technique

A technique which computes transient electromagnetic responses of narrow apertures in complex conducting scatterers was implemented as an extension of previously developed Finite-Difference Time-Domain (FDTD) computer codes. Although these apertures are narrow with respect to the wavelengths contained within the power spectrum of excitation, this technique does not require significantly more computer resources to attain the increased resolution at the apertures. In the report, an analytical technique which utilizes Babinet's principle to model the apertures is developed, and an FDTD computer code which utilizes this technique is described

PMD-insensitive SCM optical receiver using polarization diversity

©2002 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.Subcarrier multiplexing (SCM) optical systems with high subcarrier frequencies are susceptible to power fading caused by fiber polarization-mode dispersion (PMD). In this letter, an SCM optical receiver free of carrier fading is proposed and demonstrated using polarization diversity. Unlike conventional PMD compensators, this setup does not require a tunable optical delay line

Cross-phase modulation in multispan WDM optical fiber systems

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.The spectral characteristics of cross-phase modulation (XPM) in multispan intensity-modulation direct-detection (IM-DD) optical systems are investigated, both experimentally and theoretically. XPM crosstalk levels and its spectral features are found to be strongly dependent on fiber dispersion and optical signal channel spacing. Interference between XPM-induced crosstalk effects created in different amplified fiber spans is also found to be important to determine the overall frequency response of XPM crosstalk effects. XPM crosstalk between channels with different data rates is evaluated. The crosstalk level between higher and lower bit rate channels is found to be similar to that between two lower bit rate channels. The effect of dispersion compensation on XPM crosstalk in multispan optical systems is discussed and per span dispersion compensation was found to be the most effective way to minimize the effect of XPM crosstalk

An FDTD/MoM hybrid technique for modeling complex antennas in the presence of heterogeneous grounds

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.Calculating the current distribution and radiation patterns for ground-penetrating radar antennas is a challenging problem because of the complex interaction between the antenna, the ground, and any buried scatterer. Typically, numerical techniques that are well suited for modeling the antennas themselves are not well suited for modeling the heterogeneous grounds, and visa versa, For example the finite-difference time-domain (FDTD) technique is well suited for modeling fields in heterogeneous media, whereas the method of moments (MoM) is well suited for modeling complex antennas in free space. This paper describes a hybrid technique, based upon the equivalence principle, for calculating an antenna's current distribution radiation pattern when the antenna is located near an air-ground interface. The original problem is decomposed into two coupled equivalent problems: one for the antenna geometry and the other for the ground geometry, with field information passing between them via a rapidly converging iterative procedure, The fields in each region may be modeled using numerical techniques best suited to them, Results for several test cases are presented, using FDTD to model the ground problem and MoM for the antenna problem, that demonstrate the accuracy of this hybrid technique

Frequency response of cross-phase modulation in multispan WDM optical fiber systems

©1998 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.The spectral characteristics of cross-phase modulation (XPM) in multispan intensity-modulation direct-detection optical systems were investigated both experimentally and theoretically. XPM crosstalk levels and its spectral features were found to be strongly dependent on fiber dispersion and optical signal channel spacing. Interference between XPM-induced crosstalk effects created in different amplified fiber spans is also found to be important to determine the overall frequency response of XPM crosstalk effects

Intensity-dependent phase-matching effects on four-wave mixing in optical fibers

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.A new phase-matching factor is derived for four-wave mixing (FWM) that includes the effects of self-phase and cross-phase modulation in optical fibers. Theoretical results predict that the wavelength of peak FWM efficiency shifts away from the fiber zero-dispersion wavelength and indicate that the conventional phase-matching factor may induce significant errors in FWM calculations. Experiments are presented to verify the new phase-matching factor and the related theoretical results. The measured results agree well with those predicted by the new phase-matching factor

A novel method for measuring polarization-mode dispersion using four-wave mixing

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.A method for measuring polarization-mode dispersion (PMD) on fiber links using Four-wave mixing (FWM) generation is presented. This method uses a probe signal to analyze the signal polarization state via PWM generation, The FWM power transfer function is derived in terms of the Stokes parameters, and is validated using both simulated and experimental results, Based on this transfer function, PMD measurements are presented that agree well with the actual PMD values. Compared to the traditional frequency-domain methods, this new method does not require a motionless condition for the measurement apparatus

Generation of ultrahigh-speed tunable-rate optical pulses using strongly gain-coupled dual-wavelength DFB laser diodes

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.A novel and simple method to generate a variable-rate, ultrahigh-speed optical pulse train is demonstrated using a dual-wavelength, strongly gain-coupled distributed-feedback laser diode, The repetition rate of the optical pulse train is continuously tunable from 25 to 80 GHz and no high-speed electronics are required in this method

Multiwavelength all-optical clock recovery

©1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEEMultiwavelength clock recovery is especially desirable in systems that use wavelength-division-multipleged technology. A multiwavelength clock-recovery device can greatly simplify costs by eliminating the need to have a separate regenerator for each wavelength. This letter discusses multiwavelength all-optical clock recovery using stimulated Brillouin scattering

Subcarrier multiplexing for high-speed optical transmission

©2002 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.The performance of high-speed digital fiber-optic transmission using subcarrier multiplexing (SCM) is investigated both analytically and numerically. In order to reduce the impact of fiber chromatic dispersion and increase bandwidth efficiency, optical single-sideband (OSSB) modulation was used. Because frequency spacing between adjacent subcarriers can be much narrower than in a conventional DWDM system, nonlinear crosstalk must be considered. Although chromatic dispersion is not a limiting factor in SCM systems because the data rate at each subcarrier is low, polarization mode dispersion (PMD) has a big impact on the system performance if radiofrequency (RF) phase detection is used in the receiver. In order to optimize the system performance, tradeoffs must be made between data rate per subcarrier, levels of modulation, channel spacing between subcarriers, optical power, and modulation indexes. A 10-Gb/s SCM test bed has been set up in which 4 x 2.5 Gb/s data streams are combined into one wavelength that occupies a 20-GHz optical bandwidth. OSSB modulation is used in the experiment. The measured results agree well with the analytical prediction