7,659 research outputs found
30 years of coda observations: Qc, Qi and Qs
A summary of the main results obtained worldwide, in memory of Keiiti Aki
Inside Mt. Vesuvius: a new method to look at the seismic (velocity and attenuation) tomographic imaging
Mt. Vesuvius have been obtained using the programming facilities as
well as the enhanced graphical power of Mathematica8TM. The velocity
and attenuation space distributions, already calculated inverting respectively
P-wave travel times and amplitude spectra of local VT quakes,
are first optimally interpolated and then graphically represented in a new
Mathematica8TM code notebook (a powerful computational document
with more facilities than a simple code) developed by the present authors.
The notebook aims at interactively and friendly representing 3D volume
distributions of velocity and attenuation parameters. The user can easily
obtain vertical sections (N-S, E-W, NE-SW and NW-SE oriented) and define
color scales to represent velocity or attenuation variations or prefer
iso-surface plots to represent the pattern of peculiar geological structures.
The use of dynamic graphical representation, allowing the sliding of any
(horizontal and/or vertical) slice through the volume under study, gives
an unusual and powerful vision of any small velocity or attenuation
anomaly. The (open source) code, coupled with the friendly use of internal
routines of Mathematica, allows to adapt the graphical representation
to any user necessity. The method appears to be particularly adapt to
represent attenuation images, where the space variations of the parameters
are strong with respect to their average. The 3-D plots of the interpolated
velocity and attenuation fields enhance the image of Mt. Vesuvius
structure, evidencing low-velocity associated with high attenuation
anomalies which appeared unfocused in the plots reported by Scarpa et al.
[2002] and De Siena et al. [2009]
Observation of coda signals from regional and local earthquakes recorded from a downhole-uphole couple of broad-band sensors at Mt Etna
Seismic coda of regional and local earthquakes recorded at a couple of broad band seismometers
located at the bottom of a 125 m deep borehole and up-hole at surface show interesting spectral
features. We observe strong similarity between the waveforms recorded from up- and down-hole
sensors at low frequency (0.1 -3 Hz) and measurable differences in the higher frequency limit. We
interpret this observation assuming that at high frequency the up-hole coda is produced by body-tosurface
wave scattering in the near surface. We compare the experimental results with numerical
simulations done using the Monte Carlo scheme of Yoshimoto et al. (2000) carried out in the
assumption of velocity and scattering coefficient which smoothly vary with depth, with the addition of a
body-to-surface wave conversion for the energy particles which reach the surface. The comparison of
the experimental coda envelopes with those obtained through numerical simulation allow for a
quantification of the turbidity parameter at surface
Shear wave splitting changes associated with the 2001 volcanic eruption on Mt. Etna
The time delays and polarizations of shear wave splitting above small earthquakes show variations
before the 2001 July 17–August 9 2001 flank eruption on Mt Etna, Sicily. Normalized
time delays, measured by singular value decomposition, show a systematic increase starting
several days before the onset of the eruption. On several occasions before the eruption, the
polarization directions of the shear waves at Station MNT, closest to the eruption, show 90â—¦-
flips where the faster and slower split shear waves exchange polarizations. The last 90â—¦-flip
being 5 days before the onset of the eruption. The time delays also exhibit a sudden decrease
shortly before the start of the eruption suggesting the possible occurrence of a ‘relaxation’
phenomena, due to crack coalescence. This behaviour has many similarities to that observed
before a number of earthquakes elsewhere
Seismic Q estimates in Umbria-Marche (central Italy): hints for the retrieval of a new attenuation law for seismic risk
In the Umbria Marche (Central Italy) region an important earthquake sequence occurred in 1997,
characterized by nine earthquakes with magnitudes in the range between 5 and 6, that caused
important damages and causalities. In the present paper we separately estimate intrinsic- and
scattering- Q
−1
parameters, using the classical MLTWA approach in the assumption of a half space
model. The results clearly show that the attenuation parameters Qi
−1
and Qs
−1
are frequency
dependent. This estimate is compared with other attenuation studies carried out in the same area, and
with all the other MLTWA estimates obtained till now in other tectonic environments in the Earth.
The bias introduced by the half space assumption is investigated through numerical solutions of the
Energy Transport equation in the more realistic assumption of a heterogeneous crust overlying a
transparent mantle, with a Moho located at a depth ranging between 35 and 45 km below the surface.
The bias introduced by the half space assumption is significant only at high frequency. We finally
show how the attenuation estimates, calculated with different techniques, lead to different PGA decay
with distance relationships, using the well known and well proven Boore’s method. This last result
indicates that care must be used in selecting the correct estimate of the attenuation parameters for
seismic risk purposes. We also discuss the reason why MLTWA may be chosen among all the other
available techniques, due to its intrinsic stability, to obtain the right attenuation parameters
The first Long Period earthquake detected in the background seismicity at Mt. Vesuvius
The typical earthquakes occurring at Mt. Vesuvius are Volcano-Tectonic. On July 20, 2003, an unusual earthquake with low and narrow frequency content was detected. The seismograms presented an emergent onset and a nearly monochromatic spectrum at all stations of the Osservatorio Vesuviano(Istituto Nazionale di Geofisica e Vulcanologia) seismic network. The event was located at about 4 km b.s.l. close to the crater axis and an equivalent duration magnitude of 0.6 was estimated. The nature of this event was investigated by comparing its features with those of two typical
Volcano-Tectonic earthquakes occurred inside the same source volume. We compared the spectral content calculating the spectrograms and the coda patterns using the Hilbert Transform. A Seismic Moment Tensor inversion was performed on the low frequency earthquake. The focal mechanisms for the two Volcano-Tectonic earthquakes were estimated with a classical technique and resulted compatible with the stress field acting on the volcano. Taking into account the clear differences with the typical Volcano-Tectonic events as well as the peculiarities retrieved from our analyses (monochromatic, low frequency spectral content, and sustained coda) and also some geochemical observations, we classify the unusual low frequency seismic event detected at Mt. Vesuvius as Long Period earthquake and propose that its origin could be linked to a pressure drop in the deep hydrothermal system
The stress-field variation on the italian active volcanic areas: the shear wave splitting monitoring
In the tex
Shear wave splitting time variation by stress-induced magma uprising at Mount Etna volcano
Shear wave splitting exhibits clear time variations before the July 17th – August 9th, 2001 flanK eruption at Mount Etna. The normalized time delays, Tn, detected through an orthogonal transformation of singular value decomposition, exhibit a clearincrease starting 20 days before the occurrence of the eruption (July 17th); the qS1 polarization direction, obtained using a 3D covariance matrix decomposition, shows a 90°-flip several times during the analyzed period: the last flip 5 days before the occurrence of the eruption. Both splitting parameters also exhibit a relaxation phase
shortly before the starting of the eruption. Our observations seem in agreement with Anisotropic Poro Elasticity (APE) modelling, suggesting a tool for the temporal monitoring of the build up of the stress
leading to the occurrence of the 2001 eruption at Mt. Etna
Microbiological surveillance of plasmid mediated colistin resistance in human Enterobacteriaceae isolates in Romagna (Northern Italy): August 2016–July 2017
Objectives: To start a surveillance program to investigate the possible diffusion of mobilized colistin resistance genes in Enterobacteriaceae strains isolated in the Unit of Microbiology of the Great Romagna Hub Laboratory. Methods: All the colistin resistant Enterobacteriaceae, isolated from August 1st 2016 to July 31st 2017, were prospectively evaluated for mcr-1 and mcr-2. Backdated survey of mcr-3, mcr-4 and mcr-5 was performed on the same group of isolates. Species identification was achieved by Vitek MS and the antibiotic susceptibility testing was performed both with Vitek-2 and Sensititre systems. Colistin resistant isolates were screened by PCR for the presence of the plasmid-mediated colistin resistance genes and amplicons were verified by sequencing. All mcr-1 positive isolates were subjected to MLST analysis. Results: Over the total of 19053 isolates belonging to Enterobacteriaceae, 90 were colistin resistant. The presence of mcr-1 was detected in 26 Escherichia coli. The overall prevalence of mcr-1 was 0.14%. The mcr-1 positive E. coli strains were assigned to 13 distinct sequence types (STs) according to MLST. Conclusions: The prospective epidemiological survey carried out in our study gave a glimpse of the plasmid-mediated colistin resistance dissemination in Romagna. Since the prevalence rate of carbapenem resistant Enterobacteriaceae (CRE) in some hospital wards in our area is alarming, we underline the importance of a Surveillance Program to monitor the spread of the plasmid-mediated colistin resistance genes into MDR Gram-negative bacteria
Glassy magnetic behavior and correlation length in nanogranular Fe-oxide and Au/Fe-oxide samples
In nanoscale magnetic systems, the possible coexistence of structural disorder and competing magnetic interactionsmay determine the appearance of a glassy magnetic behavior, implying the onset of a low-temperature disordered collective state of frozen magnetic moments. This phenomenology is the object of an intense research activity, stimulated by a fundamental scientific interest and by the need to clarify how disordered magnetism effects may affect the performance of magnetic devices (e.g., sensors and data storage media). We report the results of a magnetic study that aims to broaden the basic knowledge of glassy magnetic systems and concerns the comparison between two samples, prepared by a polyol method. The first can be described as a nanogranular spinel Fe-oxide phase composed of ultrafine nanocrystallites (size of the order of 1 nm); in the second, the Fe-oxide phase incorporated non-magnetic Au nanoparticles (10-20 nm in size). In both samples, the Fe-oxide phase exhibits a glassy magnetic behavior and the nanocrystallite moments undergo a very similar freezing process. However, in the frozen regime, the Au/Fe-oxide composite sample is magnetically softer. This effect is explained by considering that the Au nanoparticles constitute physical constraints that limit the length of magnetic correlation between the frozen Fe-oxide moments
- …