Entrepreneurship psychological characteristics of nurses

Nurses are full partners with other health care professionals. Until fairly recently the scope of nurses potential in entrepreneurship has not been widely recognized. The present study tries to evaluate entrepreneurship psychological characteristics among nurses. The survey instrument included scales measuring entrepreneurship psychological characteristics including locus of control, need for achievement, risk taking propensity, ambiguity tolerance, and innovation, among nurses in the Shahid Sadoughi Hospital, Yazd, Iran in 2013. In this study average of entrepreneurship psychological characteristics of nurses which are higher than standard mark. The majority of the nurses have average entrepreneurship (20.4). It means that they have some strong entrepreneurship. The result show that average of the need for achievement is 34.5, the locus of control 33.8, risk taking propensity 33.2, ambiguity tolerance 34.2, and innovation 41.6. The results indicate that the 4 dimensions of the need for achievement, risk taking, Ambiguity Tolerance, and Innovation were significant. However, the locus of control is not significant at a 0.05 significance level. In terms, entrepreneurially nurses are comparatively more innovative, have risk taking attitudes, need for achievement, Ambiguity Tolerance, and Innovation. Results largely support significant positive relationships between psychological traits and entrepreneurial orientations. © 2016 Tehran University of Medical Sciences. All rights reserved

Removal of styrene from waste gas stream using a biofilter

280 tyrene is produced in large quantities in the chemical industries and its monomer constitutes the building block for the production of polystyrene, styrene copolymers, polyester resins, and rubber. It is also used in the production of fiberglass boats, storage tanks, pipes, shower units and car parts. Besides the known industrial releases from the production and processing units, styrene is also generated in smaller quantities from other sources such as natural microbial and fungal metabolism, cigarette smoke, automobile exhaust, and the pyrolysis and cracking of petroleum and its derivatives S Original Article Removal of styrene from waste gas stream using a biofilter B. Bina*, R.Dehghanzadeh *, H. Pourmoghadas *, A.Kalantary *, A.Torkian** ABSTRACT Background: Styrene is produced in large quantities in the chemical industries and it has been listed among the 189 hazardous and toxic atmospheric contaminants under Clean Air Act Amendments, 1990, due to its adverse effects on human health. The biofiltration has been widely and efficiently applied during recent decades for the treatment of air streams contaminated by volatile organic compounds at low concentrations. Also this technology has been applied widely and efficiently in the removal of styrene from waste gas streams

Comprehensive study on probability of controlling Caspian Sea invasive Ctenophora Activity 4: The laboratory study on probability of controlling Mnemiopsis leidyi by use of Beroe ovata (reproduction study of B. ovata in the Caspian Sea water)

In 1999 Mnemiopsis leidyi was introduced to the Caspian Sea from the Black Sea with ballast waters from the ships. The comprehensive study on probability of controlling Caspian Sea invasive Ctenophora planned after a remarkable of decreeing in Kilka fish catches stocks and fisheris community problems. This study focus on reproduction experiments of Beroe ovata as the best candidate for control of Mnemiopsis population size in the Caspian Sea that was performed in Turkey and Iran during 2002-2003. At 2002, 87 specimens of B. ovata, 10-50 mm transferred to Caspian sea ecology research center from Marmareh sea where acclimated with Caspian sea water gradually. At 2003, experiments were performed near to Black sea (at Sinop) with freshly collected Beroe ovata, 40-65 mm size in three salinity level treatment, the Black sea water 18 , Mixed water 15 and Caspian water 12 . 130 individuals of Beroe ovata were brought from Sinop (Turkey) to Iran during 2003. A number of Beroe specimens were sent to Guilan province for reproduction studies and another part were sent to Mazandaran province for both reproduction and mesocosem studies. For control we had 1 Beroe, length 30 mm in the Black Sea water that was alive during of study in Iran. The Jars were examined each day for ova and larvae and they were collected and put into glass container of Caspian water for hatching and developing survey, some of them were left without any handling for larvae developing. Also in another experiment the eggs collected from jars were placed in the same three treatments for studying of growth and survival. The results were unsuccessful on propagation experiments at 2002 since the spawning and hatching rates were very low (20 ova) and, none of the larvae developed into adults in Caspian Sea water. The spawning was more in Marmareh sea water with 138 ova where only 7 larvae was hatched. Results showed that Beroe specimens is able to survive and reproduce in Caspian water but was not as well as Black Sea also the Beroe larvae growth rate is low in the Caspian Sea water. Maximum fecundity of Beroe individual was 2212 and 235 ovae in Caspian Sea water in site Sinop and Iran respectively. Results showed 34-100% eggs in Caspian Sea water were destroyed and did not develop. In Iran we obtained only one larvae with 5 mm length, other larvae were at different stages of development but most of them were 1.2 2 mm. The results of mesocosm survey showed most of ova and larvae have been obtained from the tanks where individuals B. ovata were with Mnemiopsis. Fecundity of Beroe in the control with Black Sea water were between 17 to 1879 with average of 828 ± 112 ova. The poor results of B. ovata reproduction obtained in this survey in Caspian Sea may be due to transportation and acclimation stress and low salinity of Caspian Sea water

Giving Alternatives for Improvement of Qualitative Features of Mehran River in Tabriz for Reuse

Backgrounds and Objectives: Shortage of available water resource and deficiency of rainfall, increasing in population growth and industrial development, suitable use of water resources and pollution prevention is an essential issue in accord with sustainable development and environmental protection. Present study shows the qualitative status ofMehran River and determines its pollution or non pollution tomunicipal wastewater and to assess qualitative characteristics of the water according to international water quality index."nMaterials and Methods:Padding strand of MEHRAN River from source to end has been done for wistful determination of branches, runoff and wastewater entrances, etc. Necessary decisions were made for determining sampling points and critical and effective points on water quality then water samples were analyzed to determine chemical and microbiological characteristics."nResults: Results showed the average of BOD5, COD, TSS, NO3, DO, pH, Turbidity and color are about 80±30, 155±58, 1013±637, 7.3±2, 4.5±3.5 mg/l, 7.2 ±1, 385±238 NTU, 122±70 TCU respectively."nConclusion: It could be concluded that the Mehran River is completely polluted with municipal sewage and is unsanitary.Water quality index varies in the range of 41-52 and the water is classified as number 4. At present the river is in a dangerous ore toxic state and could not be considered as drinking water resource or needs more advanced water treatment units

Interaction Of Acrylonitrile Vapors On A Bench Scale Biofilter Treating Styrene-Polluted Waste Gas Streams

Considering concurrent use of styrene and acrylonitrile as raw materials in the production of synthetic resins and plastic and their associated differences in physiochemical properties and biodegradability, our experiments were conducted in a three-stage downflow bench-scale biofilter to study the potential suppressive effects of acrylonitrile on styrene removal. A Mixture of yard waste compost and shredded plastics and activated sludge was used as bed media. Gas phase concentration of styrene and acrylonitrile was determined via gas chromatographic analysis. Under steady-state conditions, maximum elimination capacity of styrene and acrylonitrile was 44 and 120 g/m3 h, respectively. The effect of moisture was very significant in reducing the specific adsorptive capacity (µg/g of bed media) of styrene and acrylonitrile. The bed media with 60% moisture content lost styrene absorption capacities by more than one order of magnitude when compared to dry media. The existence of water increased the absorption capacity of medium for acrylonitrile about 95%. Styrene elimination capacity of the biofilter during co-treatment was less as compared to pure styrene biodegradation indicating the likelihood of inhibitory kinetics. Introduction of acrylonitrile into the air stream reduced elimination capacity of styrene to 103 g/m3 h. The adverse impact on removal rate of acrylonitrile due to the presence of styrene in the gas stream was minimal. Carbon-equivalent removal for the system amounted to about 85 g C/m3 h at empty bed retention time of 120 s

A new DNA sequence entropy-based Kullback-Leibler algorithm for gene clustering

Information theory is a branch of mathematics that overlaps with communications, biology, and medical engineering. Entropy is a measure of uncertainty in the set of information. In this study, for each gene and its exons sets, the entropy was calculated in orders one to four. Based on the relative entropy of genes and exons, Kullback-Leibler divergence was calculated. After obtaining the Kullback-Leibler distance for genes and exons sets, the results were entered as input into 7 clustering algorithms: single, complete, average, weighted, centroid, median, and K-means. To aggregate the results of clustering, the AdaBoost algorithm was used. Finally, the results of the AdaBoost algorithm were investigated by GeneMANIA prediction server to explore the results from gene annotation point of view. All calculations were performed using the MATLAB Engineering Software (2015). Following our findings on investigating the results of genes metabolic pathways based on the gene annotations, it was revealed that our proposed clustering method yielded correct, logical, and fast results. This method at the same that had not had the disadvantages of aligning allowed the genes with actual length and content to be considered and also did not require high memory for large-length sequences. We believe that the performance of the proposed method could be used with other competitive gene clustering methods to group biologically relevant set of genes. Also, the proposed method can be seen as a predictive method for those genes bearing up weak genomic annotations