A heparin-mimicking polymer conjugate stabilizes basic fibroblast growth factor.

Basic fibroblast growth factor (bFGF) is a protein that plays a crucial role in diverse cellular functions, from wound healing to bone regeneration. However, a major obstacle to the widespread application of bFGF is its inherent instability during storage and delivery. Here, we describe the stabilization of bFGF by covalent conjugation with a heparin-mimicking polymer, a copolymer consisting of styrene sulfonate units and methyl methacrylate units bearing poly(ethylene glycol) side chains. The bFGF conjugate of this polymer retained bioactivity after synthesis and was stable to a variety of environmentally and therapeutically relevant stressors--such as heat, mild and harsh acidic conditions, storage and proteolytic degradation--unlike native bFGF. Following the application of stress, the conjugate was also significantly more active than the control conjugate system in which the styrene sulfonate units were omitted from the polymer structure. This research has important implications for the clinical use of bFGF and for the stabilization of heparin-binding growth factors in general

Degradable PEGylated protein conjugates utilizing RAFT polymerization

Poly(ethylene glycol) (PEG)-protein therapeutics exhibit enhanced pharmacokinetics, but have drawbacks including decreased protein activities and polymer accumulation in the body. Therefore a major aim for second-generation polymer therapeutics is to introduce degradability into the backbone. Herein we describe the synthesis of poly(poly(ethylene glycol methyl ether methacrylate)) (pPEGMA) degradable polymers with protein-reactive end-groups via reversible addition-fragmentation chain transfer (RAFT) polymerization, and the subsequent covalent attachment to lysozyme through a reducible disulfide linkage. RAFT copolymerization of cyclic ketene acetal (CKA) monomer 5,6-benzo-2-methylene-1,3-dioxepane (BMDO) with PEGMA yielded two polymers with number-average molecular weight (Mn ) (GPC) of 10.9 and 20.9 kDa and molecular weight dispersities (Ð) of 1.34 and 1.71, respectively. Hydrolytic degradation of the polymers was analyzed by 1H-NMR and GPC under basic and acidic conditions. The reversible covalent attachment of these polymers to lysozyme, as well as the hydrolytic and reductive cleavage of the polymer from the protein, was analyzed by gel electrophoresis and mass spectrometry. Following reductive cleavage of the polymer, an increase in activity was observed for both conjugates, with the released protein having full activity. This represents a method to prepare PEGylated proteins, where the polymer is readily cleaved from the protein and the main chain of the polymer is degradable

Calculating the mean time to capture for tethered ligands and its effect on the chemical equilibrium of bound ligand pairs

We present here the calculation of the mean time to capture of a tethered ligand to the receptor. This calculation is then used to determine the shift in the partitioning between (1) free, (2) singly bound, and (3) doubly bound ligands in chemical equilibrium as a function of the length of the tether. These calculations are used in the research article Fibroblast Growth Factor 2 Dimer with Superagonist in vitro Activity Improves Granulation Tissue Formation During Wound Healing (Decker et al., in press [1]) to explain quantitatively how changes in polymeric linker length in the ligand dimers modifies the efficacy of these molecules relative to that of free ligands. Keywords: Ligand bindin

A heparin-mimicking polymer conjugate stabilizes basic fibroblast growth factor.

Basic fibroblast growth factor (bFGF) is a protein that plays a crucial role in diverse cellular functions, from wound healing to bone regeneration. However, a major obstacle to the widespread application of bFGF is its inherent instability during storage and delivery. Here, we describe the stabilization of bFGF by covalent conjugation with a heparin-mimicking polymer, a copolymer consisting of styrene sulfonate units and methyl methacrylate units bearing poly(ethylene glycol) side chains. The bFGF conjugate of this polymer retained bioactivity after synthesis and was stable to a variety of environmentally and therapeutically relevant stressors--such as heat, mild and harsh acidic conditions, storage and proteolytic degradation--unlike native bFGF. Following the application of stress, the conjugate was also significantly more active than the control conjugate system in which the styrene sulfonate units were omitted from the polymer structure. This research has important implications for the clinical use of bFGF and for the stabilization of heparin-binding growth factors in general

Fibroblast growth factor 2 dimer with superagonist in vitro activity improves granulation tissue formation during wound healing

Site-specific chemical dimerization of fibroblast growth factor 2 (FGF2) with the optimal linker length resulted in a FGF2 homodimer with improved granulation tissue formation and blood vessel formation at exceptionally low concentrations. Homodimers of FGF2 were synthesized through site-specific linkages to both ends of different molecular weight poly(ethylene glycols) (PEGs). The optimal linker length was determined by screening dimer-induced metabolic activity of human dermal fibroblasts and found to be that closest to the inter-cysteine distance, 70 Å, corresponding to 2 kDa PEG. A straightforward analysis of the kinetics of second ligand binding as a function of tether length showed that, as the polymerization index (the number of monomer repeat units in the polymer, N) of the tether decreases, the mean time for second ligand capture decreases as ∼N(3/2), leading to an enhancement of the number of doubly bound ligands in steady-state for a given (tethered) ligand concentration. FGF2-PEG2k-FGF2 induced greater fibroblast metabolic activity than FGF2 alone, all other dimers, and all monoconjugates, at each concentration tested, with the greatest difference observed at low (0.1 ng/mL) concentration. FGF2-PEG2k-FGF2 further exhibited superior activity compared to FGF2 for both metabolic activity and migration in human umbilical vein endothelial cells, as well as improved angiogenesis in a coculture model in vitro. Efficacy in an in vivo wound healing model was assessed in diabetic mice. FGF2-PEG2k-FGF2 increased granulation tissue and blood vessel density in the wound bed compared to FGF2. The results suggest that this rationally designed construct may be useful for improving the fibroblast matrix formation and angiogenesis in chronic wound healing

Homodimeric Protein–Polymer Conjugates via the Tetrazine–<i>trans</i>-Cyclooctene Ligation

Tetrazine end-functionalized telechelic polymers were synthesized by controlled radical polymerization (CRP) and employed to generate T4 lysozyme homodimers. Mutant T4 lysozyme (V131C), containing a single surface-exposed cysteine, was modified with a protein-reactive <i>trans</i>-cyclooctene (T4L-TCO). Reversible addition–fragmentation chain transfer (RAFT) polymerization yielded poly­(<i>N</i>-isopropyl­acrylamide) (pNIPAAm) with a number-average molecular weight (<i>M</i>_n by ¹H NMR) of 2.0 kDa and a dispersity (<i>Đ</i> by GPC) of 1.05. pNIPAAm was then modified at both ends by postpolymerization with 6-methyl­tetrazine. For comparison, 2.0 kDa bis-tetrazine poly­(ethylene glycol) (PEG) and 2.0 kDa bis-maleimide pNIPAAm were synthesized. Ligation of T4L-TCO to bis-tetrazine pNIPAAm or bis-tetrazine PEG resulted in protein homodimer in 38% yield and 37% yield, respectively, after only 1 h, whereas bis-maleimide pNIPAAm resulted in only 5% yield of dimer after 24 h. This work illustrates the advantage of employing tetrazine ligation over maleimide thiol–ene chemistry for the synthesis of protein homodimer conjugates

Combination of Integrin-Binding Peptide and Growth Factor Promotes Cell Adhesion on Electron-Beam-Fabricated Patterns

Understanding and controlling cell adhesion on engineered scaffolds is important in biomaterials and tissue engineering. In this report we used an electron-beam (e-beam) lithography technique to fabricate patterns of a cell adhesive integrin ligand combined with a growth factor. Specifically, micron-sized poly­(ethylene glycol) (PEG) hydrogels with aminooxy- and styrene sulfonate-functional groups were fabricated. Cell adhesion moieties were introduced using a ketone-functionalized arginine-glycine-aspartic acid (RGD) peptide to modify the <i>O</i>-hydroxylamines by oxime bond formation. Basic fibroblast growth factor (bFGF) was immobilized by electrostatic interaction with the sulfonate groups. Human umbilical vein endothelial cells (HUVECs) formed focal adhesion complexes on RGD- and RGD and bFGF-immobilized patterns as shown by immunostaining of vinculin and actin. In the presence of both bFGF and RGD, cell areas were larger. The data demonstrate confinement of cellular focal adhesions to chemically and physically well-controlled microenvironments created by a combination of e-beam lithography and “click” chemistry techniques. The results also suggest positive implications for addition of growth factors into adhesive patterns for cell-material interactions