565 research outputs found
Autoclave design for high pressure-high temperature corrosion studies
Acknowledgements The authors gratefully acknowledge the contribution of Steve Cawley of John Cardwell Limited and Jim Herrmann of Cortest Inc. for the manufacture of the autoclave and for the permission to use the vessel design schematic drawings (Figures 8 and 9) in the paper; these figures are not to be used for production without the express written permission of Cortest Inc. The assistance of the technical staff of the School of Engineering Central Workshop is much appreciated.Peer reviewedPostprin
Crack detection in a rotating shaft using artificial neural networks and PSD characterisation
Peer reviewedPostprin
Potential of Probing the Lunar Regolith using Rover-Mounted Ground Penetrating Radar: Moses Lake Dune Field Analog Study
Probing radars have been widely recognized by the science community to be an efficient tool to explore lunar subsurface providing a unique capability to address several scientific and operational issues. A wideband (200 to 1200 MHz) Ground Penetrating Radar (GPR) mounted on a surface rover can provide high vertical resolution and probing depth from few tens of centimeters to few tens of meters depending on the sounding frequency and the ground conductivity. This in term can provide a better understand regolith thickness, elemental iron concentration (including ilmenite), volatile presence, structural anomalies and fracturing. All those objectives are of important significance for understanding the local geology and potential sustainable resources for future landing sites in particular exploring the thickness, structural heterogeneity and potential volatiles presence in the lunar regolith. While the operation and data collection of GPR is a straightforward case for most terrestrial surveys, it is a challenging task for remote planetary study especially on robotic platforms due to the complexity of remote operation in rough terrains and the data collection constrains imposed by the mechanical motion of the rover and limitation in data transfer. Nevertheless, Rover mounted GPR can be of great support to perform systematic subsurface surveys for a given landing site as it can provide scientific and operational support in exploring subsurface resources and sample collections which can increase the efficiency of the EVA activities for potential human crews as part of the NASA Constellation Program. In this study we attempt to explore the operational challenges and their impact on the EVA scientific return for operating a rover mounted GPR in support of potential human activity on the moon. In this first field study, we mainly focused on the ability of GPR to support subsurface sample collection and explore shallow subsurface volatiles
The Mechanical Behavior of a 25Cr Super Duplex Stainless Steel at Elevated Temperature
Peer reviewedPostprin
The visible effect of a very heavy magnetic monopole at colliders
If a heavy Dirac monopole exists, the light-to-light scattering below the
monopole production threshold is enhanced due to strong coupling of monopoles
to photons. At the next Linear Collider with electron beam energy 250 GeV this
photon pair production could be observable at monopole masses less than 2.5-6.4
TeV in the mode or 3.7-10 TeV in the mode, depending on
the monopole spin. At the upgraded Tevatron such an effect is expected to be
visible at monopole masses below 1-2.5 TeV. The strong dependence on the
initial photon polarizations allows to find the monopole spin in experiments at
and colliders. We consider the production and
the production at and or colliders via the
same monopole loop. The possibility to discover these processes is
significantly lower than that of the case.Comment: 18 pages, 2 figures, RevTe
Non-destructive structural imaging of steelwork with atomic magnetometers
We demonstrate the imaging of ferromagnetic carbon steel samples and we detect the thinning of their profile with a sensitivity of 0.1 mm using a Cs radio-frequency atomic magnetometer. Images are obtained at room temperature, in magnetically unscreened environments. By using a dedicated arrangement of the setup and active compensation of background fields, the magnetic disturbance created by the samples’ magnetization is compensated. Proof-of-concept demonstrations of non-destructive structural evaluation in the presence of concealing conductive barriers are also provided. The relevant impact for steelwork inspection and health and usage monitoring without disruption of operation is envisaged, with direct benefit for industry, from welding in construction to pipeline inspection and corrosion under insulation in the energy sector. Published by AIP Publishing. https://doi.org/10.1063/1.504203
Identification of long-duration noise transients in LIGO and Virgo
The LIGO and Virgo detectors are sensitive to a variety of noise sources,
such as instrumental artifacts and environmental disturbances. The Stochastic
Transient Analysis Multi-detector Pipeline (STAMP) has been developed to search
for long-duration (t1s) gravitational-wave (GW) signals. This pipeline
can also be used to identify environmental noise transients. Here we present an
algorithm to determine when long-duration noise sources couple into the
interferometers, as well as identify what these noise sources are. We analyze
the cross-power between a GW strain channel and an environmental sensor, using
pattern recognition tools to identify statistically significant structure in
cross-power time-frequency maps. We identify interferometer noise from
airplanes, helicopters, thunderstorms and other sources. Examples from LIGO's
sixth science run, S6, and Virgo's third scientific run, VSR3, are presented.Comment: 10 pages, 7 figures, Gravitational-wave Physics & Astronomy Worksho
Non-destructive structural imaging of steelwork with atomic magnetometers
We demonstrate the imaging of ferromagnetic carbon steel samples and we detect the thinning of their profile with a sensitivity of 0.1 mm using a Cs radio-frequency atomic magnetometer. Images are obtained at room temperature, in magnetically unscreened environments. By using a dedicated arrangement of the setup and active compensation of background fields, the magnetic disturbance created by the samples' magnetization is compensated. Proof-of-concept demonstrations of non-destructive structural evaluation in the presence of concealing conductive barriers are also provided. The relevant impact for steelwork inspection and health and usage monitoring without disruption of operation is envisaged, with direct benefit for industry, from welding in construction to pipeline inspection and corrosion under insulation in the energy sector
Phase-space-region operators and the Wigner function: Geometric constructions and tomography
Quasiprobability measures on a canonical phase space give rise through the action of Weyl's quantization map to operator-valued measures and, in particular, to region operators. Spectral properties, transformations, and general construction methods of such operators are investigated. Geometric trace-increasing maps of density operators are introduced for the construction of region operators associated with one-dimensional domains, as well as with two-dimensional shapes (segments, canonical polygons, lattices, etc.). Operational methods are developed that implement such maps in terms of unitary operations by introducing extensions of the original quantum system with ancillary spaces (qubits). Tomographic methods of reconstruction of the Wigner function based on the radon transform technique are derived by the construction methods for region operators. A Hamiltonian realization of the region operator associated with the radon transform is provided, together with physical interpretations
Ensuring high standards for the delivery of NIPT world-wide: Development of an international external quality assessment scheme
OBJECTIVE: To ensure accurate and appropriate reporting of non-invasive prenatal testing (NIPT) results, the standard of testing should be measured and monitored by participation in external quality assessment (EQA) schemes. The findings from international pilot EQAs for NIPT for the common trisomies are presented. METHODS: In the first pilot, three EQA providers used artificially manufactured reference materials to deliver an EQA for NIPT. The second pilot used clinically collected maternal plasma samples. The testing and reporting for aneuploidy status was performed by participating laboratories using routine procedures. Reports were assessed against peer ratified criteria and EQA scores were returned to participants. RESULTS: Forty-laboratories participated in the first. Genotyping accuracy was high; four laboratories reported a critical genotyping error (10%) and two reported partial results. Eighty-seven laboratories participated in the second pilot using maternal plasma, two reporting a critical genotyping error (2.3%). For both rounds, report content was variable with key information frequently omitted or difficult to identify within the report. CONCLUSIONS: We have successfully delivered an international pilot EQA for NIPT. When compared with currently available manufactured materials, EQA for NIPT was best performed using clinically collected maternal plasma. Work is required to define and improve the standard of reporting
- …