263 research outputs found
Interaction between surface structures and tunnelling in sand: Centrifuge and computational modelling
Tunnelling in urban areas requires a careful estimation of the consequence of soil settlements on existing buildings. In this paper the interaction between the excavation of a tunnel in sand and surface structures is investigated. A two dimensional finite element model is presented and validated through comparison with centrifuge test results, both with and without structures. The model is then used to perform a sensitivity study on the effect of building weight on soil movements and structural deformations. The results of the validation indicate that assuming a no-tension interface between the soil and the structure is essential to capture the soil-structure interaction that was experimentally observed. The parametric analyses show that the relation between the building stiffness and the tunnelling-induced deformations depends on the building weight.Financial support was provided by the Engineering and Physical Sciences Research Council of the United Kingdom, under grant reference number EP/K018221/1.This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.tust.2015.07.01
Recommended from our members
Centrifuge modelling of building response to tunnel excavation
Understanding the building response to tunnelling-induced settlements is an important aspect of urban tunnelling in soft ground. Previous centrifuge modelling research demonstrated significant potential to study this tunnelâsoilâstructure interaction problem. However, these recent studies were limited by simplified building models, which might result in uncertainties when interpreting the building performance to tunnelling subsidence. This paper presents an experimental modelling procedure and the results of a series of centrifuge tests, involving relatively complex surface structures subjected to tunnelling in sand. Powder-based three-dimensional (3D) printing was adopted to fabricate building models with realistic layouts, facade openings and foundations. The 3D printed material had a Young's modulus and a brittle response similar to historic masonry. Modelling effects and boundary conditions are quantified. The good agreement between the experimentally obtained results and previous research demonstrates that the soilâstructure interaction during tunnel excavation is well replicated. The experimental procedure provides a framework to quantify how building features affect the response of buildings to tunnelling subsidence.The authors are grateful to EPSRC grant EP/K018221/1 and Crossrail for the financial support
Recommended from our members
Centrifuge modelling of tunneling-induced settlement damage to 3D-printed surface structures
For urban tunneling projects it is essential to predict and prevent building damage. Although various case studies and experiments have shown that buildings considerably modify greenfield soil movements, widely accepted damage assessment methods neglect this soil-structure interaction and simplify structures as linear elastic beams. This paper summarizes an experimental investigation of the response of more realistic structures to tunneling-induced deformations. Small scale structural models with facade openings and brittle material properties were 3D printed and tested in a geotechnical centrifuge. Soil and structure displacement data were obtained by image-based measurement. Results demonstrate that structures notably mitigate differential greenfield ground displacements. It is also shown that maximum soil settlements, horizontal soil displacements beneath the structure and structural damage in the form of cracking significantly depend on the position of the structure in the settlement profile. The results provide a basis from which to predict building settlement response with greater certainty
Organism-sediment interactions govern post-hypoxia recovery of ecosystem functioning
Hypoxia represents one of the major causes of biodiversity and ecosystem functioning loss for coastal waters. Since eutrophication-induced hypoxic events are becoming increasingly frequent and intense, understanding the response of ecosystems to hypoxia is of primary importance to understand and predict the stability of ecosystem functioning. Such ecological stability may greatly depend on the recovery patterns of communities and the return time of the system properties associated to these patterns. Here, we have examined how the reassembly of a benthic community contributed to the recovery of ecosystem functioning following experimentally-induced hypoxia in a tidal flat. We demonstrate that organism-sediment interactions that depend on organism size and relate to mobility traits and sediment reworking capacities are generally more important than recovering species richness to set the return time of the measured sediment processes and properties. Specifically, increasing macrofauna bioturbation potential during community reassembly significantly contributed to the recovery of sediment processes and properties such as denitrification, bedload sediment transport, primary production and deep pore water ammonium concentration. Such bioturbation potential was due to the replacement of the small-sized organisms that recolonised at early stages by large-sized bioturbating organisms, which had a disproportionately stronger influence on sediment. This study suggests that the complete recovery of organism-sediment interactions is a necessary condition for ecosystem functioning recovery, and that such process requires long periods after disturbance due to the slow growth of juveniles into adult stages involved in these interactions. Consequently, repeated episodes of disturbance at intervals smaller than the time needed for the system to fully recover organism-sediment interactions may greatly impair the resilience of ecosystem functioning.
Liver Volumetry Plug and Play: Do It Yourself with ImageJ
AB - BACKGROUND: A small remnant liver volume is an important risk factor for posthepatectomy liver failure and can be predicted accurately by computed tomography (CT) volumetry using radiologic image analysis software. Unfortunately, this software is expensive and usually requires support by a radiologist. ImageJ is a freely downloadable image analysis software package developed by the National Institute of Health (NIH) and brings liver volumetry to the surgeon's desktop. We aimed to assess the accuracy of ImageJ for hepatic CT volumetry. METHODS: ImageJ was downloaded from http://www.rsb.info.nih.gov/ij/ . Preoperative CT scans of 15 patients who underwent liver resection for colorectal cancer liver metastases were retrospectively analyzed. Scans were opened in ImageJ; and the liver, all metastases, and the intended parenchymal transection line were manually outlined on each slice. The area of each selected region, metastasis, resection specimen, and remnant liver was multiplied by the slice thickness to calculate volume. Volumes of virtual liver resection specimens measured with ImageJ were compared with specimen weights and calculated volumes obtained during pathology examination after resection. RESULTS: There was an excellent correlation between the volumes calculated with ImageJ and the actual measured weights of the resection specimens (r(2) = 0.98, p < 0.0001). The weight/volume ratio amounted to 0.88 +/- 0.04 (standard error) and was in agreement with our earlier findings using CT-linked radiologic software. CONCLUSION: ImageJ can be used for accurate hepatic CT volumetry on a personal computer. This application brings CT volumetry to the surgeon's desktop at no expense and is particularly useful in cases of tertiary referred patients, who already have a proper CT scan on CD-ROM from the referring institution. Most likely the discrepancy between volume and weight results from exsanguination of the liver after resectio
The stigma of obesity in the general public and its implications for public health - a systematic review
<p>Abstract</p> <p>Background</p> <p>Up to this date, prevalence rates of obesity are still rising. Aside from co-morbid diseases, perceived discrimination and stigmatization leads to worsen outcomes in obese individuals. Higher stigmatizing attitudes towards obese individuals may also result in less support of preventive and interventive measures. In light of the immense burden of obesity on health care systems and also on the individuals' quality of life, accepted and subsidized preventive measures are needed. Policy support might be determined by views of the lay public on causes of obesity and resulting weight stigma. This study seeks to answer how representative samples of the lay public perceive people with obesity or overweight status (stigmatizing attitudes); what these samples attribute obesity to (causal attribution) and what types of interventions are supported by the lay public and which factors determine that support (prevention support).</p> <p>Methods</p> <p>A systematic literature search was conducted. All studies of representative samples reporting results on (a) stigmatizing attitudes towards overweight and obese individuals, (b) causal beliefs and (c) prevention support were included.</p> <p>Results</p> <p>Only 7 articles were found. One study reported prevalence rates of stigmatizing attitudes. About a quarter of the population in Germany displayed definite stigmatizing attitudes. Other studies reported causal attributions. While external influences on weight are considered as well, it seems that internal factors are rated to be of higher importance. Across the studies found, regulative prevention is supported by about half of the population, while childhood prevention has highest approval rates. Results on sociodemographic determinants differ substantially.</p> <p>Conclusions</p> <p>Further research on public attitudes toward and perception of overweight and obesity is urgently needed to depict the prevailing degree of stigmatization. Introducing a multidimensional concept of the etiology of obesity to the lay public might be a starting point in stigma reduction.</p
Glutathione S-transferase M1-null genotype as risk factor for SOS in oxaliplatin-treated patients with metastatic colorectal cancer
Background: Oxaliplatin is used as a neo-adjuvant therapy in hepatic colorectal carcinoma metastasis. This treatment has significant side effects, as oxaliplatin is toxic to the sinusoidal endothelial cells and can induce sinusoidal obstruction syndrome (SOS), which is related to decreased overall survival. Glutathione has an important role in the defence system, catalysed by glutathione S-transferase (GST), including two non-enzyme producing polymorphisms (GSTM1-null and GSTT1-null). We hypothesise that patients with a non-enzyme producing polymorphism have a higher risk of developing toxic injury owing to oxaliplatin. Methods: In the nontumour-bearing liver, the presence of SOS was studied histopathologically. The genotype was determined by a semi-nested PCR. Results: Thirty-two of the 55 (58%) patients showed SOS lesions, consisting of 27% mild, 22% moderate and 9% severe lesions. The GSTM1-null genotype was present in 25 of the 55 (46%). Multivariate analysis showed that the GSTM1-null genotype significantly correlated with the presence of (moderate-severe) SOS (P=0.026). Conclusion: The GSTM1-null genotype is an independent risk factor for SOS. This finding allows us, in association with other risk factors, to conceive a potential risk profile predicting whether the patient is at risk of developing SOS, before starting oxaliplatin, and subsequently might result in adjustment of treatment
A Large Specific Deterrent Effect of Arrest for Patronizing a Prostitute
BACKGROUND: Prior research suggests that arrest, compared with no police detection, of some types of offenders does not decrease the chances they will reoffend. METHODOLOGY/PRINCIPAL FINDINGS: We assessed the specific deterrent effect of arrest for patronizing a street prostitute in Colorado Springs by comparing the incidence of arrest for clients of prostitutes first detected through public health surveillance with the incidence of rearrest for clients first detected by police arrest. Although these sets of clients were demographically and behaviorally similar, arrest reduced the likelihood of a subsequent arrest by approximately 70%. In other areas of the United States, arrest did not appear to displace a client's patronizing. CONCLUSIONS/SIGNIFICANCE: Our results suggest that apprehending clients decreases their patronizing behavior substantially
- âŠ