677 research outputs found

    Breath holding endurance: stability over time and relationship with self-assessed persistence.

    Get PDF
    Breath holding (BH) endurance has been suggested as a measure of the distress tolerance that could predict the outcome of attempts to implement behavior changes, such as stopping smoking or illicit substance use. It is not known however, to what degree BH endurance is a variable trait that may vary depending on situational context, or a stable state characteristic. We measured BH in two groups of participants at baseline and 22 and 89 days (N = 62 and N = 41) post-baseline and in a third group at multiple times points across a 5-week period (N = 44). Participants also filled out a questionnaire created to assess their perceived persistence compared to peers. Correlations were found between baseline and final BH measures (r's > 0.67, p's < 0.0001) at all time points. When groups were combined, regardless of time point, Spearman's rank correlation showed a strong positive correlation (rs = 0.66, p < 0.0001). Self-assessed persistence was not related to BH endurance. This study provides evidence of the stability of BH across time when tested under the same conditions in young adults. Further research is needed to clarify whether BH is linked to behavioral outcomes.This work was supported by UKCTAS (grant number MR/K023195/1

    Breath holding endurance: stability over time and relationship with self-assessed persistence

    Get PDF
    The Authors Breath holding (BH) endurance has been suggested as a measure of the distress tolerance that could predict the outcome of attempts to implement behavior changes, such as stopping smoking or illicit substance use. It is not known however, to what degree BH endurance is a variable trait that may vary depending on situational context, or a stable state characteristic. We measured BH in two groups of participants at baseline and 22 and 89 days (N = 62 and N = 41) post-baseline and in a third group at multiple times points across a 5-week period (N = 44). Participants also filled out a questionnaire created to assess their perceived persistence compared to peers. Correlations were found between baseline and final BH measures (r's > 0.67, p's < 0.0001) at all time points. When groups were combined, regardless of time point, Spearman's rank correlation showed a strong positive correlation (rs = 0.66, p < 0.0001). Self-assessed persistence was not related to BH endurance. This study provides evidence of the stability of BH across time when tested under the same conditions in young adults. Further research is needed to clarify whether BH is linked to behavioral outcomes

    X-ray determination of compressive residual Stresses in spring steel generated by high-speed water Quenching

    Get PDF
    Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced by shot peening on the surface of automotive springs to bestow compressive residual stresses that improve the fatigue resistance and increase the service life of the parts after heat treatment. In this work, a high-speed quenching was used to achieve compressive residual stresses on the surface of AISI/SAE 5160 steel samples by producing high thermal gradients and interrupting the cooling in order to generate a case-core microstructure. A special laboratory equipment was designed and built, which uses water as the quenching media in a high-speed water chamber. The severity of the cooling was characterized with embedded thermocouples to obtain the cooling curves at different depths from the surface. Samples were cooled for various times to produce different hardened case depths. The microstructure of specimens was observed with a scanning electron microscope (SEM). X-ray diffraction (XRD) was used to estimate the magnitude of residual stresses on the surface of the specimens. Compressive residual stresses at the surface and sub-surface of about -700 MPa were obtained.Peer ReviewedPostprint (published version

    Influence of the Delta Phase in the Microstructure of the Inconel 718 subjected to “Delta-processing” Heat Treatment and Hot Deformed

    Get PDF
    AbstractInconel 718 (IN718) is a nickel base alloy widely used in the aerospace industry due to its mechanical stability at elevated temperatures. Stable δ phase with acicular morphology weakens the IN718, however, it has been found that a spherical morphology distributed in the grain boundaries acts as an anchor preventing grain growth during hot deformation. The delta processing (DP718) is a saturation of δ phase in the alloy by thermal treatment followed by thermomechanical working to control the grain growth and morphology during deformation. Two specimens (A and B) of IN718 alloy were solubilized for 1h at 1100°C WQ and aging at 900°C for 24hWQ thermal treatment, following bythermomechanical deformation. Sample A was deformed at 0.001 s -1 and sample Bat 0.01 s-1, both deformations were carried out at 960°C and the final microstructures were characterized by optical microscopy and scanning electron microscopy (SEM) in order to evaluate morphology and grainsize distribution

    Effects of tobacco smoke and electronic cigarette vapor exposure on the oral and gut microbiota in humans: a pilot study

    Get PDF
    Background: The use of electronic cigarettes (ECs) has increased drastically over the past five years, primarily as an alternative to smoking tobacco cigarettes. However, the adverse effects of acute and long-term use of ECs on the microbiota have not been explored. In this pilot study, we sought to determine if ECs or tobacco smoking are associated with differences in the oral and gut microbiota, in comparison to non-smoking controls. Methods: We examined a human cohort consisting of 30 individuals: 10 EC users, 10 tobacco smokers, and 10 controls. We collected cross-sectional fecal, buccal swabs, and saliva samples from each participant. All samples underwent V4 16S rRNA gene sequencing. Results: Tobacco smokers had significantly different bacterial profiles in all sample types when compared to controls, and in feces and buccal swabs when compared to EC users. The most significant associations were found in the gut, with a higher relative abundance of Prevotella (P = 0.006) and lowered Bacteroides (P = 0.036) in tobacco smokers. The Shannon diversity was also significantly reduced (P = 0.009) in fecal samples collected from tobacco smokers compared to controls. No significant difference was found in the alpha diversity, beta-diversity or taxonomic relative abundances between EC users and controls. Discussion: The current pilot data demonstrate that tobacco smoking is associated with signicant differences in the oral and gut microbiome in humans. However, validation in larger cohorts and greater understanding of the short and long-term impact of EC use on microbiota composition and function is warranted

    Caracterización fisicoquímica del agua de la laguna La Vega Escondida, Tampico, Tamaulipas-México - Physicochemical water characterization of La Vega Escondida Lake, Tampico, Tamaulipas-México

    Get PDF
    La laguna La Vega Escondida se ubica al Noroeste del municipio de Tampico, Tamaulipas. Es un área natural protegida, que colinda con la zona conurbada de Tampico, Madero y Altamira, que además del beneficio ecológico,es una fuente de abastecimiento de agua potable para la ciudad de Tampico. Por lo cual es importante conocer la composición fisicoquímica del agua de esta laguna, con el fin de proteger tanto el ecosistema como la salud humana. Este estudio, evaluó la concentración de los parámetros fisicoquímicos del agua (pH, conductividad eléctrica, sólidos totales, temperatura, cloruros, dureza, alcalinidad, sulfatos, demanda química de oxígeno y oxígeno disuelto), así como la distribución espacial de éstos dentro de la laguna. Los resultados obtenidos, se compararon con los criterios ecológicos de la calidad del agua (CE-CCA-001-SEMARNAT, 1989) y con la Norma Oficial Mexicana (NOM-127-SSA1-1994), obteniéndose que en los parámetros analizados el agua cumple con la calidad requerida para mantener la vida acuática y captación para consumo humano, excepto en el parámetro de sólidos suspendidos totales (SST). Se observó además que los patrones de distribución espacial de los parámetros fisicoquímicos son heterogéneos y que hay diferencias significativas en el parámetro OD (profundidades), así como en el pH y la CE (puntos de muestreo), al nivel de significancia del 5 %

    DEVELOPMENT OF A CONTINUOUS COUNTER-CURRENT HIGH EFFICIENCY GAS-SOLIDS CONTACTOR

    Full text link
    Experimental conversions of UO/sub 3/ to UO /sub 2/ to UF/sub 4/ in batch fluidized bed pilot-scale contactor have demonstrated that conversion rates approaching those predicted from basic kinetic data are attainable. Further studies with fluidized beds in columns incorporating a very slight taper show that solids mixing with attendant product contamination is reduced by a factor of ten as a direct result of the taper. Experiments with tapered fluidlized beds made the design of continuous (as opposed to the step enrichment of a multistage contactor) countercurrent contactors practical. Design procedures, in generalized form, are presented. The procedures take into consideration heat transfer, mixing losses, reaction kinetics, and chemical equilibria. (auth

    Folate synthesis in plants: The first step of the pterin branch is mediated by a unique bimodular GTP cyclohydrolase I

    Get PDF
    GTP cyclohydrolase I (GCHI) mediates the first and committing step of the pterin branch of the folate-synthesis pathway. In microorganisms and mammals, GCHI is a homodecamer of ≈26-kDa subunits. Genomic approaches identified tomato and Arabidopsis cDNAs specifying ≈50-kDa proteins containing two GCHI-like domains in tandem and indicated that such bimodular proteins occur in other plants. Neither domain of these proteins has a full set of the residues involved in substrate binding and catalysis in other GCHIs. The tomato and Arabidopsis cDNAs nevertheless encode functional enzymes, as shown by complementation of a yeast fol2 mutant and by assaying GCHI activity in extracts of complemented yeast cells. Neither domain expressed separately had GCHI activity. Recombinant tomato GCHI formed dihydroneopterin triphosphate as reaction product, as do other GCHIs, but unlike these enzymes it did not show cooperative behavior and was inhibited by its substrate. Denaturing gel electrophoresis verified that the bimodular GCHI polypeptide is not cleaved in vivo into its component domains, and size-exclusion chromatography indicated that the active enzyme is a dimer. The deduced tomato and Arabidopsis GCHI polypeptides lack overt targeting sequences and thus are presumably cytosolic, in contrast to other plant folate-synthesis enzymes, which are mitochondrial proteins with typical signal peptides. GCHI mRNA and protein are strongly in expressed unripe tomato fruits, implying that fruit folate is made in situ rather than imported. As ripening advances, GCHI expression declines sharply, and folate content drops, suggesting that folate synthesis fails to keep pace with turnover

    Antimicrobial Activity of a Cationic Guanidine Compound against Two Pathogenic Oral Bacteria

    Get PDF
    This study evaluated the potential antimicrobial properties of a polyguanidine (CatDex) on two oral bacteria. Chlorhexidine gluconate 1340 μmoL L−1 (CHX 0.12%) was used as control. Streptococcus mutans (S. mutans) and Porphyromonas gingivalis (P. gingivalis) were grown in BHI media. Bacterial sensitivity and antimicrobial activity were determined by the minimum inhibitory concentration (MIC) and Kirby-Bauer methods. To study side effects, that is, toxicity, dental pulp stem cells (DPSCs) were used. Fluorometric cytotoxicity and confocal microscopy assays were used in order to test cell viability. CatDex inhibited growth of S. mutans at all concentrations and growth of P. gingivalis at all concentrations except 25 μmoL L−1. The MIC of CatDex was 50 μmoL L−1 for both S. mutans and P. gingivalis. The inhibition of bacteria exposed for 8 h at 50 μmoL L−1 of CatDex exhibited increased antimicrobial activity over time, with 91% inhibition in both bacteria. The antimicrobial activities of CatDex and CHX were similar when tested on two common bacteria. CatDex was significantly less toxic to DPSCs. CatDex toxicity depended on time and not on concentration. With regard to clinical relevance, CatDex may have potential as a novel antimicrobial agent. Further studies are in progress
    corecore