Gallium phosphide high temperature diodes

High temperature (300 C) diodes for geothermal and other energy applications were developed. A comparison of reverse leakage currents of Si, GaAs, and GaP was made. Diodes made from GaP should be usable to 500 C. A Liquid Phase Epitaxy (LPE) process for producing high quality, grown junction GaP diodes is described. This process uses low vapor pressure Mg as a dopant which allows multiple boat growth in the same LPE run. These LPE wafers were cut into die and metallized to make the diodes. These diodes produce leakage currents below ten to the -9th power A/sq cm at 400 C while exhibiting good high temperature rectification characteristics. High temperature life test data is presented which shows exceptional stability of the V-I characteristics

Feeding Techniques To Increase Calf Growth In The First Two Months Of Life

End of project reportData from Cornell University and the University of Illinois in the USA suggested that average daily liveweight gains of 900 to 1000 g/calf/day could be achieved from birth to weaning provided the calf milk replacer (CMR) is formulated to meet the calf’s amino acid requirements for such a rate of gain. Their findings suggested a daily milk replacer DM allowance of 1250 to 1500 g/d with a crude protein content of 26 to 30%. A series of studies were undertaken, at ARINI with home born dairy calves and at Grange Beef Research Centre with purchased dairy calves, to determine the effect of increasing the daily milk replacer DM allowance and or increasing the crude protein content of the CMR on calf performance.The main outcomes of these studies were There was no growth or intake response in any of the studies to increasing the crude protein content of the CMP from 23% to 28%. Calf growth rates responded to increasing the dailymilk replacer allowance from 600 to 1200 g/day for both home bred and purchased calves. However, the effect was not significant post-weaning in any of the studies. In all of the studies (for both home reared and purchased calves) feeding a high level of CMRdecreased concentrate DM intake. However, the calves concentrate intakes were similar post-weaning. The home bred calves with free access to the milk replacer feeders failed to consume their 1200 g/day allowance. Calves offered 600 or 1200 g of CMR/day had average consumption of 554 and 944 g/d, respectively, in the milk feeding period. Feeding a high (1200 g/d) compared to a low level (600 g/d) CMRdiet for the first 56 days had no significant effect on carcass weight or carcass characteristics when purchased male calves were slaughtered off an ad libitum concentrate diet after 388 days. The final carcass weights were 231 and 240 kg for the respective 600 and 1200 g/d CMR. Reducing the fat content of the CMRfrom 18% to 12% did not have any effect on concentrate intake or liveweight gain

Fabrication and test of lightweight honeycomb sandwich structures Final report

Fabrication and testing of lightweight honeycomb sandwich structure

A gallium phosphide high-temperature bipolar junction transistor

Preliminary results are reported on the development of a high temperature (350 C) gallium phosphide bipolar junction transistor (BJT) for geothermal and other energy applications. This four-layer p(+)n(-)pp(+) structure was formed by liquid phase epitaxy using a supercooling technique to insure uniform nucleation of the thin layers. Magnesium was used as the p-type dopant to avoid excessive out-diffusion into the lightly doped base. By appropriate choice of electrodes, the device may also be driven as an n-channel junction field-effect transistor. The initial design suffers from a series resistance problem which limits the transistor's usefulness at high temperatures

Developmental Level of Moral Judgment Influences Behavioral Patterns during Moral Decision-making

We developed and tested a behavioral version of the Defining Issues Test-1 revised (DIT-1r), which is a measure of the development of moral judgment. We conducted a behavioral experiment using the behavioral Defining Issues Test (bDIT) to examine the relationship between participants’ moral developmental status, moral competence, and reaction time when making moral judgments. We found that when the judgments were made based on the preferred moral schema, the reaction time for moral judgments was significantly moderated by the moral developmental status. In addition, as a participant becomes more confident with moral judgment, the participant differentiates the preferred versus other schemas better particularly when the participant’s abilities for moral judgment are more developed

Measuring Moral Reasoning using Moral Dilemmas: Evaluating Reliability, Validity, and Differential Item Functioning of the Behavioral Defining Issues Test (bDIT)

We evaluated the reliability, validity, and differential item functioning (DIF) of a shorter version of the Defining Issues Test-1 (DIT-1), the behavioral DIT (bDIT), measuring the development of moral reasoning. 353 college students (81 males, 271 females, 1 not reported; age M = 18.64 years, SD = 1.20 years) who were taking introductory psychology classes at a public University in a suburb area in the Southern United States participated in the present study. First, we examined the reliability of the bDIT using Cronbach’s α and its concurrent validity with the original DIT-1 using disattenuated correlation. Second, we compared the test duration between the two measures. Third, we tested the DIF of each question between males and females. Findings reported that first, the bDIT showed acceptable reliability and good concurrent validity. Second, the test duration could be significantly shortened by employing the bDIT. Third, DIF results indicated that the bDIT items did not favour any gender. Practical implications of the present study based on the reported findings are discussed