13,062 research outputs found
Simultaneous Wind and Rain Retrieval using Seawinds Data
The Sea Winds scatterometer is designed primarily to retrieve winds over the ocean. Since the deployment of Sea Winds on QuikSCAT in 1999, rain corruption in wind measurements has been recognized as one of the largest contributors to wind retrieval error. This paper presents a new estimation method that incorporates rain effects into Sea Winds wind retrieval. The new method simultaneously retrieves wind and rain, giving improved wind estimates in rain-corrupted areas and providing Sea Winds-derived estimates of the rain rate. The simultaneous wind/rain estimation method works especially well in the sweet spot of Sea Winds\u27 swath. On the outer-beam edges of the swath, rain estimation is not possible. This area, however, is only a small fraction of the total data. Wind speeds from simultaneous wind/rain retrieval are nearly unbiased, while the wind-only wind speeds become increasingly biased with rain rate. A synoptic example demonstrates that the new method has the capability of visually reducing the error due to rain while producing a consistent (yet somewhat noisy) estimate of the rain rate
Non-Gaussian Features of Transmitted Flux of QSO's Ly Absorption: Intermittent Exponent
We calculate the structure function and intermittent exponent of the 1.) Keck
data, which consists of 29 high resolution, high signal to noise ratio (S/N)
QSO Ly absorption spectra, and 2.)the Ly forest simulation
samples produced via the pseudo hydro scheme for the low density cold dark
matter (LCDM) model and warm dark matter (WDM) model with particle mass
and 1000 eV. These two measures detect not only
non-gaussianities, but also the type of non-gaussianty in the the field. We
find that, 1.) the structure functions of the simulation samples are
significantly larger than that of Keck data on scales less than about 100
h kpc, 2.) the intermittent exponent of the simulation samples is more
negative than that of Keck data on all redshifts considered, 3.) the
order-dependence of the structure functions of simulation samples are closer to
the intermittency of hierarchical clustering on all scales, while the Keck data
are closer to a lognormal field on small scales. These differences are
independent of noise and show that the intermittent evolution modeled by the
pseudo-hydro simulation is substantially different from observations, even
though they are in good agreement in terms of second and lower order
statistics. (Abridged)Comment: 17 pages, 13 figures. Accepted by Ap
Microwave backscatter modeling of erg surfaces in the Sahara Desert
The Sahara Desert includes large expanses of sand dunes called ergs. These dunes are formed and constantly reshaped by prevailing winds. Previous study shows that Saharan ergs exhibit significant radar backscatter (σ°) modulation with azimuth angle (f). We use σ° measurements observed at various incidence angles and f from the NASA Scatterometer (NSCAT), the SeaWinds scatterometer, the ERS scatterometer (ESCAT), and the Tropical Rainfall Measuring Mission\u27s Precipitation Radar to model the σ° response from sand dunes. Observations reveal a characteristic relationship between the backscatter modulation and the dune type, i.e., the number and orientation of the dune slopes. Sand dunes are modeled as a composite of tilted rough facets, which are characterized by a probability distribution of tilt with a mean value, and small ripples on the facet surface. The small ripples are modeled as cosinusoidal surface waves that contribute to the return signal at Bragg angles only. Longitudinal and transverse dunes are modeled with rough facets having Gaussian tilt distributions. The model results in a σ° response similar to NSCAT and ESCAT observations over areas of known dune types in the Sahara. The response is high at look angles equal to the mean tilts of the rough facets and is lower elsewhere. This analysis provides a unique insight into scattering by large-scale sand bedforms
Modeling microwave emissions of erg surfaces in the Sahara Desert
Sand seas (ergs) of the Sahara are the most dynamic parts of the desert. Aeolian erosion, transportation, and deposition continue to reshape the surface of the ergs. The large-scale features (dunes) of these bedforms reflect the characteristics of the sand and the long-term wind. Radiometric emissions from the ergs have strong dependence on the surface geometry. We model the erg surface as composed of tilted rough facets. Each facet is characterized by a tilt distribution dependent upon the surface roughness of the facet. The radiometric temperature (T(b)) of ergs is then the weighted sum of the T(b) from all the facets. We use dual-polarization T(b) measurements at 19 and 37 GHz from the Special Sensor Microwave Imager aboard the Defense Meteorological Satellite Program and the Tropical Rainfall Measuring Mission Microwave Imager to analyze the radiometric response of erg surfaces and compare them to the model results. The azimuth angle (φ) modulation of T(b) is caused by the surface geometrical characteristics. It is found that longitudinal and transverse dune fields are differentiable based on their polarization difference (ΔT(b)) φ-modulation, which reflects type and orientation of dune facets. ΔT(b) measurements at 19 and 37 GHz provide consistent results. The magnitude of ΔT(b) at 37 GHz is lower than at 19 GHz due to higher attenuation. The analysis of ΔT(b) over dry sand provides a unique insight into radiometric emission over ergs
Improving the CASIE SAR Images
In the summer 2009 NASA Characterization of Arctic Sea Ice Experiment (CASIE09), the microASAR, a small LFMCW SAR, was operated on the NASA Sierra unmanned aerial system (UAS). An overview of the microASAR and its role in CASIE09 are described in [1, 2]. While the limitations in the motion measurements stored with the microASAR data during the CASIE09 mission originally precluded full motion compensation, motion data collected for other CASIE sensors can be employed to improve the SAR image focus and calibration. This paper describes the methodology developed to time-align this motion data and applies this data along with other algorithm improvements to the processing of the microASAR data. This paper also presents a concise description of the backprojection image processing used
Research in Observations of Oceanic Air/Sea Interaction
The primary purpose of this research has been: (1) to develop an innovative research radar scatterometer system capable of directly measuring both the radar backscatter and the small-scale and large-scale ocean wave field simultaneously and (2) deploy this instrument to collect data to support studies of air/sea interaction. The instrument has been successfully completed and deployed. The system deployment lasted for six months during 1995. Results to date suggest that the data is remarkably useful in air/sea interaction studies. While the data analysis is continuing, two journal and fifteen conference papers have been published. Six papers are currently in review with two additional journal papers scheduled for publication. Three Master's theses on this research have been completed. A Ph.D. student is currently finalizing his dissertation which should be completed by the end of the calendar year. We have received additional 'mainstream' funding from the NASA oceans branch to continue data analysis and instrument operations. We are actively pursuing results from the data expect additional publications to follow. This final report briefly describes the instrument system we developed and results to-date from the deployment. Additional detail is contained in the attached papers selected from the bibliography
Spin relaxation and spin Hall transport in 5d transition-metal ultrathin films
The spin relaxation induced by the Elliott-Yafet mechanism and the extrinsic
spin Hall conductivity due to the skew-scattering are investigated in 5d
transition-metal ultrathin films with self-adatom impurities as scatterers. The
values of the Elliott-Yafet parameter and of the spin-flip relaxation rate
reveal a correlation with each other that is in agreement with the Elliott
approximation. At 10-layer thickness, the spin-flip relaxation time in 5d
transition-metal films is quantitatively reported about few hundred nanoseconds
at atomic percent which is one and two orders of magnitude shorter than that in
Au and Cu thin films, respectively. The anisotropy effect of the Elliott-Yafet
parameter and of the spin-flip relaxation rate with respect to the direction of
the spin-quantization axis in relation to the crystallographic axes is also
analyzed. We find that the anisotropy of the spin-flip relaxation rate is
enhanced due to the Rashba surface states on the Fermi surface, reaching values
as high as 97% in 10-layer Hf(0001) film or 71% in 10-layer W(110) film.
Finally, the spin Hall conductivity as well as the spin Hall angle due to the
skew-scattering off self-adatom impurities are calculated using the Boltzmann
approach. Our calculations employ a relativistic version of the
first-principles full-potential Korringa-Kohn-Rostoker Green function method
Investigations of Temperature and Backscatter Correlation in the Dry Snow Zone of the Greenland Ice Sheet
Due to system degradation, satellite-borne scatterometers require post-launch calibrations to maintain accuracy. The dry snow zone of the Greenland ice sheet has been used for calibration due to its relatively constant backscatter properties. However, we recently discovered that some of the variation in the dry snow zone backscatter is seasonal. This paper uses correlation analysis to investigate the relationship between temperature and backscatter in the dry snow zone. The correlation coefficient is found to be significant, especially after spatially averaging the backscatter. However, an analysis and simulation demonstrate that spatial averaging can artificially increase the correlation coefficient
Backprojection Analysis of MIMO SAR
Multiple-input multiple-output (MIMO) techniques have brought significant advances to wireless communications. In recent years, researchers have sought to bring similar advances to radar using MIMO. One specific area that has received relatively little attention is MIMO synthetic aperture radar (SAR). The advantages that MIMO might provide to SAR are not well represented in literature. This paper discusses the motivation for MIMO SAR and derives MIMO signal correlation in order to determine what imaging geometries are required for MIMO SAR
Backprojection Autofocus for Synthetic Aperture Radar
In synthetic aperture radar (SAR), many adverse conditions may cause errors in the raw phase-history data. Autofocus methods are commonly used in SAR to mitigate the effects of these problems. Over the years, many types of autofocus have algorithms have been created, however, each has implicit assumptions restricting their use. The backprojection image formation algorithm places few restrictions on SAR imaging, thus it is desirable to have an autofocus algorithm that is similarly unconstrained. This paper presents a versatile autofocus method that is accordant with backprojection
- …