Use of a flexible optical fibre bundle to interrogate a Fabry–Perot sensor for photoacoustic imaging

Photoacoustic imaging systems based on a Fabry Perot (FP) ultrasound sensor that is read-out by scanning a free-space laser beam over its surface can provide high resolution photoacoustic images. However, this type of free-space scanning usually requires a bulky 2-axis galvanometer based scanner that is not conducive to the realization of a lightweight compact imaging head. It is also unsuitable for endoscopic applications that may require complex and flexible access. To address these limitations, the use of a flexible, coherent fibre bundle to interrogate the FP sensor has been investigated. A laboratory set-up comprising an x-y scanner, a commercially available, 1.35 mm diameter, 18,000 core flexible fibre bundle with a custom-designed telecentric optical relay at its distal end was used. Measurements of the optical and acoustic performance of the FP sensor were made and compared to that obtained using a conventional free-space FP based scanner. Spatial variations in acoustic sensitivity were greater and the SNR lower with the fibre bundle implementation but high quality photoacoustic images could still be obtained. 3D images of phantoms and ex vivo tissues with a spatial resolution and fidelity consistent with a free-space scanner were acquired. By demonstrating the feasibility of interrogating the FP sensor with a flexible fibre bundle, this study advances the realization of compact hand-held clinical scanners and flexible endoscopic devices based on the FP sensing concept

Approximation algorithms for hard variants of the stable marriage and hospitals/residents problems

When ties and incomplete preference lists are permitted in the Stable Marriage and Hospitals/Residents problems, stable matchings can have different sizes. The problem of finding a maximum cardinality stable matching in this context is known to be NP-hard, even under very severe restrictions on the number, size and position of ties. In this paper, we describe polynomial-time 5/3-approximation algorithms for variants of these problems in which ties are on one side only and at the end of the preference lists. The particular variant is motivated by important applications in large scale centralised matching schemes

Trends in mortality by labour market position around retirement ages in three European countries with different welfare regimes

<p>Objectives: In the face of economic downturn and increasing life expectancy, many industrial nations are adopting a policy of postponing the retirement age. However, questions still remain around the consequence of working longer into old age. We examine mortality by work status around retirement ages in countries with different welfare regimes; Finland (social democratic), Turin (Italy; conservative), and England and Wales (liberal).</p> <p>Methods: Death rates and rate ratios (RRs) (reference rates = ‘in-work’), 1970 s–2000 s, were estimated for those aged 45–64 years using the England and Wales longitudinal study, Turin longitudinal study, and the Finnish linked register study.</p> <p>Results: Mortality of the not-in-work was consistently higher than the in-work. Death rates for the not-in-work were lowest in Turin and highest in Finland. Rate ratios were smallest in Turin (RR men 1972–76 1.73; 2002–06 1.63; women 1.22; 1.68) and largest in Finland (RR men 1991–95 3.03; 2001–05 3.80; women 3.62; 4.11). Unlike RRs for men, RRs for women increased in every country (greatest in Finland).</p> <p>Conclusions: These findings signal that overall, employment in later life is associated with lower mortality, regardless of welfare regime.</p&gt

The Imprint of Galaxy Formation on X-ray Clusters

It is widely believed that structure in the Universe evolves hierarchically, as primordial density fluctuations, amplified by gravity, collapse and merge to form progressively larger systems. The structure and evolution of X-ray clusters, however, seems at odds with this hierarchical scenario for structure formation. Poor clusters and groups, as well as most distant clusters detected to date, are substantially fainter than expected from the tight relations between luminosity, temperature and redshift predicted by these models. Here we show that these discrepancies arise because, near the centre, the entropy of the hot, diffuse intracluster medium (ICM) is higher tha$achievable through gravitational collapse, indicating substantial non-gravitational heating of the ICM. We estimate this excess entropy for the first time, and argue that it represents a relic of the energetic winds through which forming galaxies polluted the ICM with metals. Energetically, this is onl$ possible if the ICM is heated at modest redshift (z \ltsim 2) but prior to cluster collapse, indicating that the formation of galaxies precedes that of clusters and that most clusters have been assembled very recently.Comment: 5 pages, plus 2 postscript figures (one in colour), accepted for publication in Natur

Experimental Investigation of Oxide Leaching Methods for Li Isotopes

To examine the applicability of different leaching methods used to extract secondary oxides from silicate solids for lithium isotope (δ7Li) analysis, this study has conducted leaching experiments on five different types of silicate solids, including a fresh basalt, two weathered basalts, a Yellow River sediment (loess-dominated) and a shale. Four factors were assessed in the experiments: the concentration of the leaching reagent hydroxylamine hydrochloride (HH), the leaching temperature (20 °C versus 95 °C), the leaching time and the reagent/solid ratio. Based on elemental concentrations and Li isotopes, 0.04 mol l-1 hydroxylamine hydrochloride (HH) in 25% v/v acetic acid at room temperature for 1 hour with 40 ml g-1 reagent/solid ratio is recommended. At high temperature, low δ7Li and high magnesium/iron ratios indicate that minerals other than secondary oxides are dissolved. With increased leaching time, there is no evidence for Li isotopic fractionation at room temperature. However, longer leaching time or increased reagent/solid ratios may increase the risk of leaching from non-oxide phases. Meanwhile, results suggest that low concentrations of HH are not sufficient to target the secondary oxides evenly, while high concentrations of HH can leach out more non-oxides. We also examined the optimal oxide leaching method within a full sequential leaching procedure (i.e., exchangeable, carbonate, oxide, clay and residual phases). Elemental concentrations show that no elements exist exclusively in oxides, so it is essential to analyse multi-elemental concentrations to verify that the leaching has accessed this phase in a given sample. Comparing secondary oxides with their corresponding solutions, we estimate the isotopic fractionation (Δ7Lioxide-solution) is -16.8‰ to -27.7‰

Isolation and characterization of the full-length cDNA encoding a member of a novel cytochrome p450 family (CYP320A1) from the tropical freshwater snail, Biomphalaria glabrata, intermediate host for Schistosoma mansoni

Cytochrome p450s (cyp450s) are a family of structurally related proteins, with diverse functions, including steroid synthesis and breakdown of toxins. This paper reports the full-length sequence of a novel cyp450 gene, the first to be isolated from the tropical freshwater snail Biomphalaria glabrata, an important intermediate host of Schistosoma mansoni. The nucleotide sequence is 2291 bp with a predicted amino acid sequence of 584aa. The sequence demonstrates conserved cyp450 structural motifs, but is sufficiently different from previously reported cyp450 sequences to be given a new classification, CYP320A1. Initially identified as down-regulated in partially resistant snails in response to S. mansoni infection, amplification of this gene using RT-PCR in both totally resistant or susceptible snail lines when exposed to infection, and all tissues examined, suggests ubiquitous expression. Characterization of the first cyp450 from B. glabrata is significant in understanding the evolution of these metabolically important proteins

Observation of diurnal variations in mesoscale eddy sea-surface currents using GOCI data

The surface current field of a mesoscale eddy in the East Sea (Sea of Japan) was derived from consecutive Geostationary Ocean Color Imager chlorophyll-a (chl-a) concentration images using the normalized maximum cross-correlation method. The estimated current field of the eddy exhibited anticyclonic structure demonstrated by the objective dynamic thresholds of correlation coefficients. The eddy periphery was defined by fitting an ellipse to subjectively selected points from the frontal map of chl-a concentration data. Radial distribution and hourly variation of the current speed around the eddy were presented. In terms of the magnitude and direction, the estimated current field was in good agreement with altimeter-based current field and current vectors from surface drifters. Diurnal variations in the current speeds of the mesoscale eddies showed a quadratic relation to the wind speed

The role of color diagnosticity in object recognition and representation

Abstract The role of color diagnosticity in object recognition and representation was assessed in three Experiments. In Experiment 1a, participants named pictured objects that were strongly associated with a particular color (e.g., pumpkin and orange). Stimuli were presented in a congruent color, incongruent color, or grayscale. Results indicated that congruent color facilitated naming time, incongruent color impeded naming time, and naming times for grayscale items were situated between the congruent and incongruent conditions. Experiment 1b replicated Experiment 1a using a verification task. Experiment 2 employed a picture rebus paradigm in which participants read sentences one word at a time that included pictures of color diagnostic objects (i.e., pictures were substituted for critical nouns). Results indicated that the ''reading'' times of these pictures mirrored the pattern found in Experiment 1. In Experiment 3, an attempt was made to override color diagnosticity using linguistic context (e.g., a pumpkin was described as painted green). Linguistic context did not override color diagnosticity. Collectively, the results demonstrate that color information is regularly utilized in object recognition and representation for highly color diagnostic items