Fabrication of living soft matter by symbiotic growth of unicellular microorganisms

We report the fabrication of living soft matter made as a result of the symbiotic relationship of two unicellular microorganisms. The material is composed of bacterial cellulose produced in situ by acetobacter (Acetobacter aceti NCIMB 8132) in the presence of photosynthetic microalgae (Chlamydomonas reinhardtii cc-124), which integrates into a symbiotic consortium and gets embedded in the produced cellulose composite. The same concept of growing living materials can be applied to other symbiotic microorganism pairs similar to the combination of algae and fungi in lichens, which is widespread in Nature. We demonstrate the in situ growth and immobilisation of the C. reinhardtii cells in the bacterial cellulose matrix produced by the simultaneous growth of acetobacter. The effect of the growth media composition on the produced living materials was investigated. The microstructure and the morphology of the produced living biomaterials were dependent on the shape of the growth culture container and media stirring conditions, which control the access to oxygen. As the photosynthetic C. reinhardtii cells remain viable and produce oxygen as they spontaneously integrate into the matrix of the bacterial cellulose generated by the acetobacter, such living materials have the potential for various applications in bio-hydrogen generation from the immobilised microalgae. The proposed approach for building living soft matter can provide new ways of immobilising other commercially important microorganisms in a bacterial cellulose matrix as a result of symbiosis with acetobacter without the use of synthetic binding agents and in turn increase their production efficiency

Artificial leaf device for hydrogen generation from immobilised C. reinhardtii microalgae

We developed a fully biomimetic leaf-like device for hydrogen production which allows incorporated fabric-immobilised microalgae culture to be simultaneously hydrated with media and harvested from the produced hydrogen in a continuous flow regime without the need to replace the algal culture. Our leaf device produces hydrogen by direct photolysis of water resulting from redirecting the photosynthetic pathways in immobilised microalgae due to the lack of oxygen. In contrast to the many other reports in the literature on batch photobioreactors producing hydrogen from suspension culture of microalgae, we present the first report where this is done in a continuous manner from a fabric-immobilised microalgae culture. The reported artificial leaf device maximises the sunlight energy utilisation per gram of algae and can be upscaled cheaply and easily to cover large areas. We compared the production of hydrogen from both immobilised and suspended cultures of C. reinhardtii microalgae under sulphur, phosphorus and oxygen deprived conditions. The viability and potential of this approach is clearly demonstrated. Even though this is a first prototype, the hydrogen yield of our artificial leaf device is twenty times higher per gram of algae than in previously the reported batch reactors. Such leaf-like devices could potentially be made from flexible plastic sheets and installed on roofs and other sun-exposed surfaces that are inaccessible by photovoltaic cells. The ability to continuously produce inexpensive hydrogen by positioning inexpensive sheets onto any surface could have an enormous importance in the field of biofuels. The proposed new concept can provide a cleaner and very inexpensive way of bio-hydrogen generation by flexible sheet-like devices

Targeted removal of blood cancer cells from mixed cell populations by cell recognition with matching particle imprints

We report a new approach for separation of blood cancer cells from healthy white blood cells based on cell recognition by surface functionalised particle imprints. We prepared polymeric particle imprints from a layer of suspension of monodisperse PMMA microbeads which closely match the size of in vitro cultured human leukaemia cells (HL60). The imprints were replicated on a large scale with UV curable polyurethane resin using nanoimprinting lithography and surface functionalized with a cationic polymer, a branched polyethylene imine (bPEI), and a Pluronic surfactant, Poloxamer 407, to engineer a weak attraction towards the cells. The latter is amplified several orders of magnitude when a cell of a closely matching size and shape fits into the imprint cavity which multiplies the contact area between the cell surface and the imprint. The particle imprints were optimised for their specificity toward blood cancer cells by treatment with oxygen plasma and then subsequent coatings with bPEI and Poloxamer 407 with various functionalisation concentrations. We tested the surface functionalised imprints for their specificity in retaining in vitro cultured human leukaemic cells (HL60) over healthy human peripheral blood mononuclear cells (PBMCs) in a flow through chamber. The effect of the flushing flow rate of the mixed cell suspension over the particle imprint and the imprint length were also investigated. At each step the selectivity towards HL60 was assessed. Selective isolation of an increased amount of HL60 tumour cells over PBMC was ultimately achieved as a function of the cell seeding ratio on the particle imprint. The effect is attributed to the substantial size difference between the HL60 cell and the PBMCs. The data presented show that relatively inexpensive PMMA microbeads imprints can be utilised as a cell separation technique which could ultimately lead to novel therapies for removal of neoplastic cells from the peripheral blood of acute myeloid leukaemia patients

Cancer bioimprinting and cell shape recognition for diagnosis and targeted treatment

Cancer incidence and mortality have both increased in the last decade and are predicted to continue to rise. Diagnosis and treatment of cancers are often hampered by the inability to specifically target neoplastic cells. Bioimprinting is a promising new approach to overcome shortfalls in cancer targeting. Highly specific recognition cavities can be made into polymer matrices to mimic lock-and-key actions seen in in vivo biological systems. Early studies concentrated on molecules and were inhibited by template size complexity. Surface imprinting allows the capture of increasingly complex motifs from polypeptides to single cell organisms and mammalian cells. Highly specific cell shape recognition can also be achieved by cell interaction with imprints that can be made into polymer matrices to mimic biological systems at a molecular level. Bioimprinting has also been used to achieve nanometre scale resolution imaging of cancer cells. Studies of bioimprint-based drug delivery on cancer cells have been recently trialled in vitro and show that this approach can potentially improve existing chemotherapeutic approaches. This review focuses on the possible applications of bioimprinting with particular regards to cancer understanding, diagnosis and therapy. Cell imprints, incorporated into biosensors can allow the limits of detection to be improved or negate the need for extensive patient sample processing. Similar cell imprinting platforms can be used for nanoscale imaging of cancer morphology, as well as to investigate topographical signalling of cancer cells in vitro. Lastly, bioimprints also have applications as selective drug delivery vehicles to tumours with the potential to decrease chemotherapy-related side effects

Capillary structured suspensions from in situ hydrophobized calcium carbonate particles suspended in a polar liquid media

© 2017 American Chemical Society. We demonstrate that capillary suspensions can be formed from hydrophilic calcium carbonate particles suspended in a polar continuous media and connected by capillary bridges formed of minute amounts of an immiscible secondary liquid phase. This was achieved in two different polar continuous phases, water and glycerol, and three different oils, oleic acid, isopropyl myristate, and peppermint oil as a secondary liquid phase. The capillary structuring of the suspension was made possible through local in situ hydrophobization of the calcium carbonate particles dispersed in the polar media by adding very small amounts of oleic acid to the secondary liquid phase. We observed a strong increase in the viscosity of the calcium carbonate suspension by several orders of magnitude upon addition of the secondary oil phase compared with the same suspension without secondary liquid phase or without oleic acid. The stability and the rheological properties of the obtained capillary structured materials were studied in relation to the physical properties of the system such as the particle size, interfacial tension between the primary and secondary liquid phases, as well as the particle contact angle at this liquid-liquid interface. We also determined the minimal concentrations of the secondary liquid phase at fixed particle concentration as well as the minimal particle concentration at fixed secondary phase concentration needed to form a capillary suspension. Capillary suspensions formed by this method can find application in structuring pharmaceutical and food formulations as well as a variety of home and personal care products

Removal of Human Leukemic Cells from Peripheral Blood Mononuclear Cells by Cell Recognition Chromatography with Size Matched Particle Imprints

We report a cell recognition chromatography approach for blood cancer cell separation from healthy peripheral blood mononuclear cells (PBMCs) based on sizematched functionalized particle imprints. Negative imprints were prepared from layers of 15 μm polymeric microbeads closely matching the size of cultured human leukemic cells (HL60). We replicated these imprints on a large scale with UV curable polyurethane resin using nanoimprinting lithography. The imprints were functionalized with branched polyethylene imine (bPEI) and passivated by Poloxamer 407 to promote a weak attraction toward cells. When a matching cell fits into an imprint cavity, its contact area with the imprint is maximized, which amplifies the attraction and the binding selectivity. We tested these imprints specificity for depleting myeloblasts from a mixture with healthy human PBMCs in a cell recognition chromatography setup hosting the imprint. The mixture of fixed HL60/PBMCs ratio was circulated over the imprint and at each step the selectivity toward HL60 was assessed by flow cytometry. The role of the imprint length, flow rate, channel depth, and the bPEI coating concentration were examined. The results show that HL60 cells, closely matching the imprint cavities, get trapped on the imprint, while the smaller PBMCs are carried away by the drag force of the flow. Lower flow rates, longer imprints, and interim channel depth favor HL60 specific retention. The bPEI concentration higher than 1 wt % on the imprint made it less selective toward the HL60 because of indiscriminate attraction with all cells. Particle imprint based cell recognition chromatography was able to achieve selective myeloblast depletion from initial 11.7% HL60 (88.3% PBMC) to less than 1.3% HL60 for 3 h of circulation. The cell recognition chromatography with size-matched microbead imprints can be employed as an efficient cell separation technique and potentially lead to alternative therapies for myeloblasts removal from peripheral blood of patients with acute myeloid leukemia

Pion-Xi correlations in Au-Au collisions at STAR

We present pion-Xi correlation analysis in Au-Au collisions at sqrt(s_NN)= 200 GeV and sqrt(s_NN) = 62.4 GeV, performed using the STAR detector at RHIC. A Xi*(1530) resonance signal is observed for the first time in Au-Au collisions. Experimental data are compared with theoretical predictions. The strength of the Xi* peak is reproduced in the correlation function assuming that pions and Xis emerge from a system in collective expansion.Comment: To appear in the proceedings of 18th Nuclear Physics Division Conference of the EPS (NPDC18),Prague, 23.8.-29.8. 200

Inclusive pi0 spectra at high transverse momentum in d-Au collisions at RHIC

Preliminary results on inclusive neutral pion production in d-Au collisions at sqrt(s_NN) = 200 GeV in the pseudo-rapidity range 0<eta<1 are presented. The measurement is performed using the STAR Barrel Electromagnetic calorimeter (BEMC). In this paper, the analysis of the first BEMC hadron measurement is described and the results are compared with earlier RHIC findings. The pi0 invariant differential cross sections show good agreement with next-to-leading order (NLO) perturbative QCD calculations.Comment: 4 pages, 5 figures, 18th Nuclear Physics Division Conference of the EPS, Prague, submitted to Nucl. Phys.

Azimuthal anisotropy and correlations in p+p, d+Au and Au+Au collisions at 200 GeV

We present the first measurement of directed flow ($v_1$) at RHIC. $v_1$ is found to be consistent with zero at pseudorapidities $\eta$ from -1.2 to 1.2, then rises to the level of a couple of percent over the range $2.4 < |\eta| < 4$. The latter observation is similar to data from NA49 if the SPS rapidities are shifted by the difference in beam rapidity between RHIC and SPS. Back-to-back jets emitted out-of-plane are found to be suppressed more if compared to those emitted in-plane, which is consistent with {\it jet quenching}. Using the scalar product method, we systematically compared azimuthal correlations from p+p, d+Au and Au+Au collisions. Flow and non-flow from these three different collision systems are discussed.Comment: Quark Matter 2004 proceeding, 4 pages, 3 figure

Azimuthal anisotropy: the higher harmonics

We report the first observations of the fourth harmonic (v_4) in the azimuthal distribution of particles at RHIC. The measurement was done taking advantage of the large elliptic flow generated at RHIC. The integrated v_4 is about a factor of 10 smaller than v_2. For the sixth (v_6) and eighth (v_8) harmonics upper limits on the magnitudes are reported.Comment: 4 pages, 6 figures, contribution to the Quark Matter 2004 proceeding