20 research outputs found
Method to obtain nonuniformity information from field emission behavior
Copyright © 2010 American Vacuum Society / American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Journal of Vacuum Science and Technology Part B: Microelectronics and Nanometer Structures, 28(3), Article number 441 and may be found at http://scitation.aip.org/content/avs/journal/jvstb/28/3/10.1116/1.3327928.This article describes the characterization of field emission from a planar cathode to a spherical anode with the approach curve method (ACM). In such a diode configuration the electric field strength at the cathode surface is nonuniform. This nonuniformity gives an extra degree of freedom and it allows the interpretation of the current-voltage and voltage-distance (V×d) curves in terms of nonuniformity. The authors apply the ACM to Cu emitters to explain the nonlinearity of the V×d curve in ACM measurements. This analysis provides a good insight into field emission phenomena, supporting a method for nonuniformity characterization based on field emission behavior
Study of a micro chamber quadrupole mass spectrometer
Copyright @ 2008 American Vacuum Society / American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Journal of Vacuum Science and Technology Part A: International Journal Devoted to Vacuum, Surfaces, and Films, 26(2), Article number 239 and may be found at http://scitation.aip.org/content/avs/journal/jvsta/26/2/10.1116/1.2827512.The design of a micro chamberquadrupolemass spectrometer (MCQMS) having a small total volume of only 20 cm3, including Faraday cup ion detector and ion source, is described. This MCQMS can resist a vacuum baking temperature of 400–500 °C. The quadrupole elements with a hyperbolic surface are made of a ceramic material and coated with a thin metal layer. The quadrupole mass filter has a field radius of 3 mm and a length of 100 mm. Prototypes of this new MCQMS can detect a minimum partial pressure of 10−8 Pa, have a peak width of ΔM=1 at 10% peak height from mass number 1 to 60, and show an excellent long-term stability. The new MCQMS is intended to be used in residual gas analyses of electron devices during a mutual pumping and baking process.National Key Basic Research
Program, the Chinese 111 Project Grant and Program for New Century Excellent Talents in University
A.C.Electroluminescent Lamps: Shedding some light on their mysteries
A.C.powder electroluminescent lamps have been known and used for many years, but their mechanism of operation is still debated. Many thousands of phosphors are known, but the vast majority are not electroluminescent. A number of materials do exhibit the effect. Of these, however, ZnS doped with Cu is absolutely in a class of its own, and is the only material from which viable lamps can be made. In this work studies have been made of the performance of devices under a range of pulsed and continuous excitation conditions and new hypotheses presented which attempt to explain the behavior of this unique material
Field emission from non-uniform carbon nanotube arrays
Regular arrays of carbon nanotubes (CNTs) are frequently used in studies on field emission. However, non-uniformities are always present like dispersions in height, radius, and position. In this report, we describe the effect of these non-uniformities in the overall emission current by simulation. We show that non-uniform arrays can be modeled as a perfect array multiplied by a factor that is a function of the CNTs spacing
New Developments in Cathodoluminescence Spectroscopy for the Study of Luminescent Materials
Contrast and decay of cathodoluminescence from phosphor particles in a scanning electron microscope
Contrast and decay of cathodoluminescence from phosphor particles in a scanning electron microscope
AbstractCathodoluminescence (CL) studies are reported on phosphors in a field emission scanning electron microscope (FESEM). ZnO: Zn and other luminescent powders manifest a bright ring around the periphery of the particles: this ring enhances the contrast. Additionally, particles resting on top of others are substantially brighter than underlying ones. These phenomena are explained in terms of the combined effects of electrons backscattered out of the particles, together with light absorption by the substrate. The contrast is found to be a function of the particle size and the energy of the primary electrons. Some phosphor materials exhibit a pronounced comet-like structure at high scan rates in a CL-image, because the particle continues to emit light after the electron beam has moved to a position without phosphor material. Image analysis has been used to study the loss of brightness along the tail and hence to determine the decay time of the materials. The effect of phosphor saturation on the determination of decay times by CL-microscopy was also investigated