28 research outputs found
Microstructural characterization of bainitic steel submitted to torsion testing and interrupted accelerated cooling.
HSLA low-carbon bainitic steel containing B was submitted to torsion tests to simulate controlled rolling, followed by interrupted accelerated cooling. Microstructural characteristics and the mechanisms for the refinement of structure were evaluated using light microscopy, scanning electron microscopy, transmission electron microscopy, and Vickers hardness testing. The final microstructure was found to contain complex mixture of granular bainite, small islands of MA constituent, bainitic ferrite, and polygonal ferrite. Increasing the cooling rate or decreasing the finish cooling temperature resulted in a decrease in the volume fraction and average size of the MA islands and the polygonal ferrite. A finish cooling temperature of 400 8 C produced a microstructure consisting of fine laths of bainitic ferrite with an interlath MA constituent. A quantitative relationship between the accelerated cooling variables and the ferrite grain size was developed
INFLUENCE OF ABNORMAL AUSTENITE GRAIN GRAIN GROWTH IN QUENCHED ABNT 5135 STEEL
Grain size in the steels is a relevant aspect in quenching and tempering heat treatments. It is known that high
austenitizing temperature and long time provide an increase in austenitic grain sizes. Likewise, after hardening of low
alloy steel, the microstructure consists of martensite and a volume fraction of retained austenite. This paper evaluates
the influence of austenite grain size on the volume fraction of retained austenite measured by metallographic analyses and
X-ray diffraction. The Mi
and Mf
temperatures were calculated using an empirical equation and experimentally determined
by differential thermal analysis. The mechanical behavior of the steel was evaluated by Vickers microhardness testing.
Differently from other results published in the literature that steel hardenability increases with the austenite grain size,
it was observed that the increase in austenite grain promotes greater volume fraction of retained austenite after water
quenching
Simulation of the controlled rolling and accelerated cooling of a bainitic steel using torsion testing.
Controlled rolling, followed by accelerated cooling, was simulated by means of torsion tests. High-strength low-alloy (HSLA) lowcarbon (0.08%) bainitic steel containing B, recently developed by the industry as a bainitic steel grade of the API X80 class, was examined. The in¯uence of cooling rate and ®nish-cooling temperature on the microstructure and mechanical properties were studied. The ®nal microstructure was predominantly bainitic. For a ®nish-cooling temperature of 4008C the microstructure consists of ®ne laths of bainitic ferrite with interlath MA constituent, and increase in the cooling rate leads to a continuous increase of the tensile and yield strengths of 158 and 183 MPa, respectively. The analysis of the results enabled the establishment of quantitative relationships between the accelerated cooling variables and the mechanical properties of steel
Martensite reversion and texture formation in 17Mn-0.06C TRIP/TWIP steel after hot cold rolling and annealing
High Mn steels with Si and Al present great plasticity when deformed due to the TRIP/TWIP effect. This work evaluated the microstructural evolution and texture formation of a 17Mn-0.06C steel after hot rolling, cold rolling to 45% of thickness reduction and annealing at 700 °C for different times. The microstructural analysis was performed by means of dilatometry, X-ray diffraction (XRD), optical (OM) and scanning electron microscopy (SEM), electron backscattering diffraction EBSD and transmission electron microscopy (TEM). It was found that during the cooling process, after the steel is annealed, the athermal ɛ and α′ martensites are formed. Tensile test results showed that the steel exhibits yield and tensile strength around 650 and 950 MPa with a total elongation around 45%. The austenite texture contains brass, copper and Goss components while the α′ and ɛ martensites textures contain rotated cube and prismatic and pyramidal fibers, respectively