1,505 research outputs found
Über die Entstehung der Arten im Thier- und Pflanzen-Reich durch natürliche Züchtung oder Erhaltung der vervollkommneten Rassen im Kampfe um's Daseyn
Die Entstehung der Arten durch natürliche Zuchtwahl oder Die Erhaltung der begünstigten Rassen im Kampfe ums Dasein
Die Fundamente zur Entstehung der Arten : zwei in den Jahren 1842 und 1844 verfasste Essays / herausgegeben von seinem Sohn Francis Darwin, autorisierte deutsche Übersetzung von Maria Semon
Über die Entstehung der Arten durch natürliche Zuchtwahl oder die Erhaltung der begünstigten Rassen im Kampfe um's Dasein : aus dem Englischen übersetzt von H. G. Bronn ; nach der sechsten englischen Auflage wiederholt durchgesehen und berichtigt von J. Victor Carus
The formation of vegetable mould : through the action of worms with observations on their habits
APPLICABILITY OF TRADITIONAL DESIGN PROCEDURES TO MODULAR STEEL BUILDINGS
Modular Steel Buildings (MSBs) have unconventional detailing requirements, compared to traditional onsite steel buildings. This may affect their design and performance. Currently, traditional design procedures are followed in their design. This thesis evaluates the performance of MSBs under gravity and seismic loads. It documents for the first time a detailed description of this unique steel building system and its detailing requirements and provides the first analytical experimental investigation that aims at improving its design methodology. The effect of directly welded stringer-to-beam connections used in MSBs on behaviour and design of MSBs floors is investigated using the finite element method. The results obtained revealed that this unique connection type affects the design of the floor stringers and welded connections but has little effect on the floor beams. Empirical relations and a simplified model were developed to predict the forces and moments likely to develop in MSB floor stringers. Nonlinear seismic performance and characteristics of braced frames of a typical MSB were studied using cyclic tests, nonlinear static pushover analysis, and incremental dynamic analyses. These studies consist of (i) an experimental investigation of the hysteretic behaviour of a scaled one-bay one-storey MSB braced frame; (ii) the strength and ductility design of braced frames of a typical MSB dormitory; (iii) the development of analytical models of selected braced frames of MSBs accounting for their unique detailing requirements and the hysteresis of steel bracing members; (iv) a study of the effect of design philosophy on the nonlinear behaviour of MSB braced frames using pushover analyses; (v) the evaluation of structural overstrength and displacement ductility of the braced frames using pushover analyses; and (vi) the assessment of seismic inelastic drift and ductility demands and capacities of the braced frames using an incremental dynamic analysis. It is concluded that while the MSB frame configuration may not significantly affect certain design and behavioural characteristics, in some others its unique detailing requirements need to be considered during design to eliminate undesirable seismic response
A Stochastic Model For A Small-time-interval-intermittent Hydrologic Process
A methodology is developed for the generation of intermittent small-time-interval (15-min.) precipitation. This methodology consists of three components: a probabilistic wet-and-dry sequence component; a Markovian precipitation distribution component; and a regressive spatial-distribution component. The theory of stochastic hydrologic modeling is described and procedures by which this theory can be applied to a hydrologic time series are presented. In particular, the application of the procedures to small-time-interval-intermittent hydrologic processes is given. The methodology is demonstrated by application to an actual precipitation network, the Boneyard Creek raingage network in Champaign-Urbana, Illinois, U.S.A. The trend in frequency of precipitation amounts from the 89-yr. Morrow plots data are produced by the model using 13-yr. of historical data. © 1984
Cyclic Behavior of Lightly Reinforced Concrete Beams
The cyclic behavior or seven lightly reinforced concrete cantilever beams is studied as a function of reinforcement ratio, nomina 1 stirrup capacity, stirrup spacing, and ratio of positive to negative reinforcement. An energy dissipation index, Di, is developed to serve as a measure of the performance of reinforced concrete beams subjected to cyclic loading. Di studies. is used to compare the test results of this study with those of four other Recommendations for design are made. Based on the experimental work, the use of a low reinforcement ratio reduces the maximum shear and compressive stresses in beams subjected to cyclic loading, and thus, reduces the rate of degradation. A reduced stirrup spacing and an increased positive to negative steel ratio, AS/As, increases the number of inelastic cycles endured and the total energy dissipated. However, an increased A~/As ratio also increases the induced shear and the energy demand, thus reducing the effectiveness of the increased positive reinforcement. Di appears to provide a consistent measure of beam performance. The analyses based on Di indicate that a decrease in maximum shear stress, and an increase in concrete strength and nominal stirrup capacity will improve the performance of reinforced concrete beams subjected to cyclic loading
- …