273 research outputs found

    Crystal Structure, Infrared Spectra, and Microwave Dielectric Properties of Temperature-Stable Zircon-Type (Y,Bi)VO<inf>4</inf> Solid-Solution Ceramics

    Get PDF
    A series of (Bi 1-x Y x )VO 4 (0.4 ≤ x ≤ 1.0) ceramics were synthesized using the traditional solid-state reaction method. In the composition range of 0.4 ≤ x ≤ 1.0, a zircon-type solid solution was formed between 900 and 1550 °C. Combined with our previous work (scheelite monoclinic and zircon-type phases coexist in the range of x < 0.40), a pseudobinary phase diagram of BiVO 4 -YVO 4 is presented. As x decreased from 1.0 to 0.40, the microwave permittivity (ϵ r ) of (Bi 1-x Y x )VO 4 ceramics increased linearly from 11.03 to 30.9, coincident with an increase in the temperature coefficient of resonant frequency (TCF) from -61.3 to +103 ppm/°C. Excellent microwave dielectric properties were obtained for (Bi 0.3 Y 0.7 )VO 4 sintered at 1025 °C and (Bi 0.2 Y 0.8 )VO 4 sintered at 1075 °C with ϵ r ∼ 19.35, microwave quality factor (Qf) ∼ 25 760 GHz, and TCF ∼ +17.8 ppm/°C and ϵ r ∼ 16.3, Qf ∼ 31 100 GHz, and TCF ∼ -11.9 ppm/°C, respectively. Raman spectra, Shannon's additive rule, a classical oscillator model, and far-infrared spectra were employed to study the structure-property relations in detail. All evidence supported the premise that Bi-based vibrations dominate the dielectric permittivity in the microwave region

    High Quality Factor, Ultralow Sintering Temperature Li6B4O9 Microwave Dielectric Ceramics with Ultralow Density for Antenna Substrates

    Get PDF
    Dense Li6B4O9microwave dielectric ceramics were synthesized at low temperature via solid-state reaction using Li2CO3and LiBO2. Optimum permittivity ∼ 5.95, quality factor ∼ 41 800 GHz and temperature coefficient of resonant frequency ∼ - 72 ppm/°C were obtained in ceramics sintered at 640 °C with a ultrasmall bulk density ∼2.003 g/cm3(∼95% relative density, the smallest among all the reported microwave dielectric ceramics). Li6B4O9ceramics were shown to be chemically compatible with silver electrodes but reacted with aluminum forming Li3AlB2O6and Li2AlBO4secondary phases. A prototype patch antenna was fabricated by tape casting and screen printing. The antenna resonated at 4.255 GHz with a bandwidth ∼279 MHz at -10 dB transmission loss (S11) in agreement with simulated results. The Li6B4O9microwave dielectric ceramic possesses similar microwave dielectric properties to the commercial materials but much lower density and could be a good candidate for both antenna substrate and low-temperature cofired ceramics technology

    Novel water insoluble (NaxAg2-x) MoO4 (0 <= x <= 2) microwave dielectric ceramics with spinel structure sintered at 410 degrees

    Get PDF
    In the present work, a novel series of water insoluble ultra-low temperature firing (Na,Ag)2MoO4 microwave dielectrics were prepared via the traditional solid state reaction method. A spinel structured solid solution was formed in the full composition range in the (NaxAg2−x)MoO4 (0 ≤ x ≤ 2). As x increased from 0 to 2.0, cell volume decreased linearly from 9.32 Å to 9.10 Å. Sintering behavior were described using a so-called ‘bowing’ effect and densification was achieved below 420 °C for 0.5 ≤ x ≤ 1.2 with grain size, 1 to 5 μm. Optimum microwave dielectric properties were obtained for (Na1.2Ag0.8)MoO4 ceramics sintered at 410 °C with a permittivity ∼8.1, a microwave quality factor ∼44 800 GHz and the temperature coefficient of the resonant frequency ∼−82 ppm °C−1 at 13.9 GHz. Silver within the solid solution inhibited hydrolyzation of ceramics and also reduced their sintering temperature. Compared with the sintering temperatures of traditional microwave dielectric ceramic (Al2O3, >1400 °C) and normal low temperature co-fired ceramics (<960 °C), this system will save lots of energy during processing and accelerate developments of sustainable electronic materials and devices

    Phase transitions for the Lifshitz black holes

    Full text link
    We study possibility of phase transitions between Lifshitz black holes and other configurations by using free energies explicitly. A phase transition between Lifshitz soliton and Lifshitz black hole might not occur in three dimensions. We find that a phase transition between Lifshitz and BTZ black holes unlikely occurs because they have different asymptotes. Similarly, we point out that any phase transition between Lifshitz and black branes unlikely occurs in four dimensions since they have different asymptotes. This is consistent with a necessary condition for taking a phase transition in the gravitational system, which requires the same asymptote.Comment: 19 pages, 7 figures, a revised version to appear in EPJ

    High permittivity and low loss microwave dielectrics suitable for 5G resonators and low temperature co-fired ceramic architecture

    Get PDF
    Bi 2 (Li 0.5 Ta 1.5 )O 7 + xBi 2 O 3 (x = 0, 0.01 and 0.02) ceramics were prepared using a solid state reaction method. All compositions were crystallized in a single Bi 2 (Li 0.5 Ta 1.5 )O 7 phase without secondary peaks in X-ray diffraction patterns. Bi 2 (Li 0.5 Ta 1.5 )O 7 ceramics were densified at 1025 °C with a permittivity (ϵ r ) of ∼ 65.1, Q f ∼ 15500 GHz (Q ∼ microwave quality factor; f ∼ resonant frequency; 16780 GHz when annealed in O 2 ) and the temperature coefficient of resonant frequency (TCF) was ∼ -17.5 ppm °C -1 . The sintering temperature was lowered to ∼920 °C by the addition of 2 mol% excess Bi 2 O 3 (ϵ r ∼ 64.1, a Q f ∼ 11200 GHz/11650 GHz when annealed in O 2 and at a TCF of ∼ -19 ppm °C -1 ) with compositions chemically compatible with Ag electrodes. Bi 2 (Li 0.5 Ta 1.5 )O 7 + xBi 2 O 3 are ideal for application as dielectric resonators in 5G mobile base station technology for which ceramics with 60 < ϵ r < 70, high Q f and close to zero TCF are commercially unavailable. They may additionally prove to be useful as high ϵ r and high Q f materials in low temperature co-fired ceramic (LTCC) technology

    Temperature stable K0.5(Nd1−xBix)0.5MoO4 microwave dielectrics ceramics with ultra-low sintering temperature

    Get PDF
    K 0.5 (Nd 1-x Bi x ) 0.5 MoO 4 (0.2 ≤ x ≤ 0.7) ceramics were prepared via the solid-state reaction method. All ceramics densified below 720°C with a uniform microstructure. As x increased from 0.2 to 0.7, relative permittivity (e(open) r ) increased from 13.6 to 26.2 commensurate with an increase in temperature coefficient of resonant frequency (TCF) from - 31 ppm/°C to + 60 ppm/°C and a decrease in Qf value (Q = quality factor; f = resonant frequency) from 23 400 to 8620 GHz. Optimum TCF was obtained for x = 0.3 (-15 ppm/°C) and 0.4 (+4 ppm/°C) sintered at 660 and 620°C with e(open) r ~15.4, Q f ~19 650 GHz, and e(open) r ~17.3, Q f ~13 050 GHz, respectively. Ceramics in this novel solid solution are a candidate for ultra low temperature co-fired ceramic (ULTCC) technology

    Crystal structure, impedance and broadband dielectric spectra of ordered scheelite-structured Bi(Sc1/3Mo2/3)O4 ceramic

    Get PDF
    Bi(Sc 1/3 Mo 2/3 )O 4 ceramics were prepared via solid state reaction method. It crystallized with an ordered scheelite-related structure (a = 16.9821(9) Å, b = 11.6097(3) Å, c = 5.3099(3) Å and β = 104.649(2)°) with a space group C12/C1, in which Bi 3+ , Sc 3+ and Mo 6+ are -8, -6 and -4 coordinated, respectively. Bi(Sc 1/3 Mo 2/3 )O 4 ceramics were densifiedat 915 °C, giving a permittivity (ε r ) 24.4, quality factor (Qf, Q = 1/dielectric loss, f = resonant frequency) ~48, 100 GHz and temperature coefficient of resonant frequency (TCF) -68 ppm/°C. Impedance spectroscopy revealed that there was only a bulk response for conductivity with activation energy (E a ) ~0.97 eV, suggesting the compound is electrically and chemically homogeneous. Wide band dielectric spectra were employed to study the dielectric response of Bi(Sc 1/3 Mo 2/3 )O 4 from 20 Hz to 30 THz. ε r was stable from 20 Hz to the GHz region, in which only ionic and electron displacive polarization contributed to the ε r

    Absorption cross section in Lifshitz black hole

    Full text link
    We derive the absorption cross section of a minimally coupled scalar in the Lifshitz black hole obtained from the new massive gravity. The absorption cross section reduces to the horizon area in the low energy and massless limit of s-wave mode propagation, indicating that the Lifshitz black hole also satisfies the universality of low energy absorption cross section for black holes.Comment: 13 pages, 1 figure, version to appear in EPJ

    Dilaton gravity approach to three dimensional Lifshitz black hole

    Full text link
    The z=3 Lifshitz black hole is an exact black hole solution to the new massive gravity in three dimensions. In order to understand this black hole clearly, we perform a dimensional reduction to two dimensional dilaton gravity by utilizing the circular symmetry. Considering the linear dilaton, we find the same Lifshitz black hole in two dimensions. This implies that all thermodynamic quantities of the z=3 Lifshitz black hole could be obtained from its corresponding black hole in two dimensions. As a result, we derive the temperature, mass, heat capacity, Bekesnstein-Hawking entropy, and free energy.Comment: 13 pages, 1 figure, version to appear in EPJ

    Distinct gut virome profile of pregnant women with type 1 diabetes in the ENDIA study

    Get PDF
    Background:The importance of gut bacteria in human physiology, immune regulation, and disease pathogenesis is well established. In contrast, the composition and dynamics of the gut virome are largely unknown; particularly lacking are studies in pregnancy. We used comprehensive virome capture sequencing to characterize the gut virome of pregnant women with and without type 1 diabetes (T1D), longitudinally followed in the Environmental Determinants of Islet Autoimmunity study. Methods:In total, 61 pregnant women (35 with T1D and 26 without) from Australia were examined. Nucleic acid was extracted from serial fecal specimens obtained at prenatal visits, and viral genomes were sequenced by virome capture enrichment. The frequency, richness, and abundance of viruses were compared between women with and without T1D. Results:Two viruses were more prevalent in pregnant women with T1D: picobirnaviruses (odds ratio [OR], 4.2; 95% confidence interval [CI], 1.0-17.1; P = .046) and tobamoviruses (OR, 3.2; 95% CI, 1.1-9.3; P = .037). The abundance of 77 viruses significantly differed between the 2 maternal groups (≥2-fold difference; P < .02), including 8 Enterovirus B types present at a higher abundance in women with T1D. Conclusions:These findings provide novel insight into the composition of the gut virome during pregnancy and demonstrate a distinct profile of viruses in women with T1D.Ki Wook Kim, Digby W. Allen ... Simon C. Barry ... Lynne C Giles ... Megan A S Penno ... Rebecca L Thomson ... et al
    • …
    corecore