Long term storage test of titanium material with liquid fluorine propellant

The compatibility of 6AL-4V Ti with propellant grade GF2 and LF2 at 77 K for up to 3 years was investigated. Titanium double coupons, annealed or heat treated, with 16 or 64 RMS finishes, were immersed in F2 in individual Pyrex capsules and stored under LN2 for 29 and 39 months. Pre and post immersion tests were performed on the propellant and coupons. Chemical analysis of the propellant did not reveal any significant changes due to titanium corrosion. Gravimetric, visual, microscopic, and metallurgical examination with pitting analysis did not reveal gross corrosion of the titanium although pitting appears to be greater after 39 months exposure. The increase in pit size and number raises the possibility of unpredictable crack propagation instability. Fracture toughness tests are necessary to define this possibility

Water compatible resin for separation and recovery of dissolved precious metals

Trace Contaminants in Water: Genesis, Rapid Detection and Sustainable Removal Processes: abstract no. 353fOpen URL - http://apps.aiche.org/proceedings/Abstract.aspx?PaperID=119742The value of precious metals such as gold to be recovered in the industrial effluents within Pearl River Delta area is over HK$20 million per annual. Furthermore, with the expected tightening of environmental legislation and enforcement in the Mainland China, there is a growing need of effluent treatment technology. Traditionally, ion-exchange resin, polymer ultra-filtration and micro-emulsion are applied in the treatment of plating effluents. However, they all have different weaknesses. Many reports have been published for the separation using aqueous biphasic system. Based on this methodology, polystyrene-grafted-polyglycidol (PS-PG), a water-compatible polymer was synthesized. This type of polymer can be used for gold or silver extraction. After extraction, the recovery of metal can be achieved by direct electro-deposition or reverse extraction using sodium cyanide.postprintThe 2008 AIChE Annual Meeting (AIChE 100), Philadelphia, PA., 16-21 November 2008. In Conference Proceedings, 2008, p. 1-

Impact of Coseismic Frictional Melting on Particle Size, Shape Distribution and Chemistry of Experimentally-Generated Pseudotachylite

In natural friction melts, or pseudotachylites, clast textures and glass compositions can influence the frictional behavior of faults hosting pseudotachylites, and are, in turn, sensitive to the processes involved in pseudotachylite formation. Quantification of these parameters in situations where the host rock composition and formation conditions are well-constrained, such as analogue experiments, may yield calibrations that can be employed in analysis of natural pseudotachylites. In this paper, we experimentally-generated pseudotachylites in granitoid rocks (tonalite and Westerly granite) at Pconf = 40 MPa and slip rates of ∼0.1 m s−1, comparable to the conditions under which natural pseudotachylite is known to form in Earth’s upper crust. We find variations in both clast textures and glass compositions that reflect formation processes, and probably influence the frictional behavior of similar natural faults hosting pseudotachylite. Quantification of particle size and shape distribution with a semi-automatic image analysis method, combined with analysis of glass and host-rock composition of these experimentally generated pseudotachylites, reveals that the textures of pseudotachylite material evolved by combinations of 1) comminution, 2) heterogeneous frictional flash melting, and 3) homogeneous (diffusive) clast melting and/or marginal decrepitation. Fractal dimensions of pseudotachylite-hosted clasts (D ∼ 3) that are greater than those of marginal fragmented host rock particles (gouge, D ∼ 2.4), reflect an increase of the intensity of comminution by slip localisation during a pre-melting phase. Chemical analyses demonstrate that these pseudotachylite glasses were generated by frictional flash melting, where host rock phases melt individually. Biotite is the least resistant to melting, feldspar intermediate, and quartz is the most resistant. The peudotachylite glass generated in these experiments has an alkaline composition, is depleted in SiO2 compared to the bulk host-rock, and shows heterogeneous compositions in a single sample related to proximity to host-rock minerals. The percentage contributions of host rock phases to the melt, calculated by a mixing model, shows that glass compositions are dominated by plagioclase and biotite. Within the melt, margins of clasts were dissolved uniformly by diffusion and/or affected by marginal decrepitation, resulting in convex and round shapes with convexities averaging ∼0.8 and circularities averaging ∼0.65

An innovation approach on the separation of metal

There has been increasing environmental concerns on the metallic pollution in recent decades. The conventional technologies used for metal extraction are ion-exchange resins, polymer ultrafiltration and microemulsion. The whole extraction mechanism can be divided into 4 steps: 1) The binding of dissolved metal to active sites, 2) Separation of the metal load extractant from the lean phase, 3) Reverse extraction of loaded metal for recovery 4) Recycling of extractant for repeated extraction. Each of the conventional methods suffers different drawbacks in different steps of the extraction mechanism….postprintThe 2008 AIChE Annual Meeting (AIChE 100), Philadelphia, PA., 16-21 November 2008. In Proceedings of the 2008 AIChE Annual Meeting, AIChE 10

Notes: Evaluation Of A Filter Bag System For NDF, ADF, And IVDMD Forage Analysis

A new method of determining in vitro dry matter digestibility (IVDMD) as recently developed in which the digestion is conducted with the forage samples in filter bags. Our objective was to compare the filter bag and conventional IVDMD analysis methods using smooth bromegrass (Bromus inermis Leyss.), switchgrass (Panicum virgatum L.), and forage sorghum [Sorghum bicolor (L.) Moench] samples. In addition, the filter bag analysis systems for determining non-sequential neutral and acid detergent fiber (NDF and ADF), respectively, were compared with the non-sequential conventional analysis systems. In the filter bag systems, the forage samples are sealed in filter bags and the analyses are conducted on a batch basis rather than on an individual basis as in the conventional IVDMD and fiber analysis procedures. The filter bag analysis methods produced results similar to the conventional methods and ranked the forage samples in the same relative order

Notes: Evaluation Of A Filter Bag System For NDF, ADF, And IVDMD Forage Analysis

A new method of determining in vitro dry matter digestibility (IVDMD) as recently developed in which the digestion is conducted with the forage samples in filter bags. Our objective was to compare the filter bag and conventional IVDMD analysis methods using smooth bromegrass (Bromus inermis Leyss.), switchgrass (Panicum virgatum L.), and forage sorghum [Sorghum bicolor (L.) Moench] samples. In addition, the filter bag analysis systems for determining non-sequential neutral and acid detergent fiber (NDF and ADF), respectively, were compared with the non-sequential conventional analysis systems. In the filter bag systems, the forage samples are sealed in filter bags and the analyses are conducted on a batch basis rather than on an individual basis as in the conventional IVDMD and fiber analysis procedures. The filter bag analysis methods produced results similar to the conventional methods and ranked the forage samples in the same relative order